Important compatibility info
Function | Central Slave Cylinder, clutch |
Base body material | Plastic |
Type | Central Slave Cylinder, clutch |
Important compatibility info
Required quantity | 2 |
Function | Warning Contact, brake pad wear |
Length | 103 mm |
Type | Warning Contact, brake pad wear |
Important compatibility info
Function | Master Cylinder, clutch |
Inner diameter | 19.05 mm |
Type | Master Cylinder, clutch |
Important compatibility info
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Rod/Strut | Push Rod |
Length | 745 mm |
Important compatibility info
Surface | Coated |
Rotor Style | Vented |
Outer diameter | 292 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 70 mm |
Minimum thickness | 18 mm |
Number of Holes | 7 |
Brake Disc Thickness | 20 mm |
Height | 43 mm |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 1 |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thread Measurement 2 | M10x1 |
Thread Measurement 1 | M10x1 |
Function | Brake Hose |
Type | Brake Hose |
Length | 283 mm |
Thread Type | with internal thread |
Important compatibility info
Length | 550 mm |
Function | Brake Hose |
Additional Information | with banjo fitting |
Type | Brake Hose |
Placement on Vehicle | Front Axle Right |
Thread Type | with internal thread |
Important compatibility info
Type | Repair Kit, control/trailing arm |
Steering arm type | for triangular control arm (CV) |
Function | Repair Kit, control/trailing arm |
Outer diameter | 72 mm |
Important compatibility info
Number of mounting bores | 3 |
Number of Rivet Holes | 3 |
Version | Fitting Kit |
Thread Measurement 1 | M12x1.5 |
Bore Diameter | 8.5 mm |
Bore Diameter 1 | 14.9 mm |
Function | Ball Joint |
Type | Ball Joint |
Mounting Type | Bolted |
Steering arm type | for control arm |
Important compatibility info
Number of mounting bores | 3 |
Number of Rivet Holes | 3 |
Version | Fitting Kit |
Thread Measurement 1 | M14x2 |
Bore Diameter 1 | 17.4 mm |
Function | Ball Joint |
Bore Diameter 2 | 20 mm |
Type | Ball Joint |
Mounting Type | Bolted |
Steering arm type | for control arm |
Important compatibility info
Wear Warning Contact | with acoustic wear warning |
Number of pads | 4 |
Number of wear indicators | 2 Per Axle |
Brake System | Mando |
Thickness/Strength 1 | 16.4 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Height 1 | 50.5 mm |
Width 1 | 132.5 mm |
Placement on Vehicle | Front Axle |
Model | i10 |
Manufacturer | HYUNDAI |
Replaced by | BBP2907 |
Important compatibility info
Opening Temperature | 89 °C |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Housing material | Plastic |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Number of Connectors / Ports | 1 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA5946 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6201)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6200)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6229 |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 991 mm |
External Teeth, Wheel Side | 30 |
External Teeth, Diff.Side | 27 |
Number of Teeth, ABS ring | 48 |
Type | Drive Shaft |
Function | Drive Shaft |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6809 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Version | Fitting Kit |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7077 |
Placement on Vehicle | Rear Axle Right, Upper |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK7810)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7811)
- 1x Borg & Beck Fastening Bolt, control arm (BSK7718)
Important compatibility info
Length 1 | 1446 mm |
Length 2 | 1085 mm |
Length 3 | 1005 mm |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 87 mm |
Inner diameter 2 | 85 mm |
Inner diameter 1 | 28 mm |
Additional Information 2 | with clamps |
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Important compatibility info
Function | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Length | 81 mm |
Inner diameter 2 | 52 mm |
Inner diameter 1 | 24 mm |
Lubrication | with grease lubrication |
Type | Bellow Kit, drive shaft |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, transmission sided |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023