Important compatibility info
| Spanner Size | 23 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 2 |
| Additional Information | with lock nut |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Length | 194 mm |
| Function | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 101 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 81 mm |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (181519)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Number of Teeth | 23 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Type | Water Pump, engine cooling |
| Additional Information | without gasket/seal |
| Housing material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bushing, leaf spring |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Material | Metal |
| Outer diameter | 40 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 132 mm |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 1645 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Black |
| Material | Plastic |
| Type | Oil Separator, crankcase ventilation |
| for OE number | 03C 103 464 D |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Type | Oil Line, charger |
| for OE number | 0379.69 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bore Diameter | 19 mm |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 5Q0 721 261 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Function | Valve, crankcase ventilation |
| Colour | Black |
| Extra Description | febi Plus |
| Type | Valve, crankcase ventilation |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (100149)
- 1x Febi Hose, crankcase ventilation (37026)
- 1x Febi Gasket, crankcase ventilation (107208)
- 1x Febi Hose Clamp (48347)
Important compatibility info
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Paired article numbers | 176573 |
| Placement on Vehicle | Right |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| ABS Ring Diameter | 76 mm |
| External Teeth, Wheel Side | 23 |
| Internal Teeth, wheel side | 19 |
| Number of Teeth, ABS ring | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186873, 187993, 190920, 188028, 187312 |
| for OE number | 0 0483 4948 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Door Check |
| Function | Door Check |
| Placement on Vehicle | Left, Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Plastic |
| Placement on Vehicle | Front Axle |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Link/Coupling Rod, stabiliser bar (45353)
- 4x Febi Screw (36639)
- 4x Febi Nut (36641)
Important compatibility info
| Diameter 1 | 6 mm |
| Type | Tarpaulin rope |
| Function | Tarpaulin rope |
| Length | 34.5 m |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21893 |
| Placement on Vehicle | Front Axle Left, Upper, Rear |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 175353 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















