Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Right |
Length | 127 mm |
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 38 mm |
Inner diameter 2 | 92 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | CV Joint |
Weight | 0.197 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (177576)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Material | Sheet Steel |
Steering arm type | Control Arm |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Inner diameter 2 | 14 mm |
Inner diameter 1 | 12 mm |
Weight | 1.385 kg |
Type | Control/Trailing Arm, wheel suspension |
Additionally required parts | Holder |
Additional Information | with rubber mounts |
Additionally Required Parts | 5Q0 614 167 B, 1K0 614 167 C |
Additional Information
Technical Information
Changed design. Bracket with OE no. 5Q0 614 167 B and 1K0 614 167 C (both not included) must be replaced at the same time.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 117 mm |
Placement on Vehicle | Front Axle |
Weight | 1.165 kg |
Thread Type | with right-hand thread |
Cone Size | 25 mm |
Pipe Diameter | 53 mm |
Extra Description | ProKit |
External Thread Size | M20 x 1,5, M30 x 1,5 RHT |
Type | Angled Ball Joint, steering push rod / Tie Rod End |
Function | Angled Ball Joint, steering push rod / Tie Rod End |
Replaces | 26006 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.850 kg |
Placement on Vehicle | Rear Axle |
Length | 93.5 mm |
Width | 46.8 mm |
Brake System | Nissin |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.7 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Length | 1130 mm |
Function | Cable Pull, parking brake |
Weight | 0.390 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 23.7 mm |
Mounting points diameter | 10.5 mm |
Function | Ball Joint |
Weight | 1.325 kg |
External Thread Size | M20 x 1,5 |
Placement on Vehicle | Lower Front Axle |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Function | Valve, crankcase ventilation |
Weight | 0.123 kg |
Colour | Black |
Extra Description | febi Plus |
Type | Valve, crankcase ventilation |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (100149)
- 1x Febi Hose, crankcase ventilation (37026)
- 1x Febi Gasket, crankcase ventilation (107208)
- 1x Febi Hose Clamp (48347)
Important compatibility info
Placement on Vehicle | both sides |
Length | 516 mm |
Housing Diameter | 19 mm |
Mounting points diameter | 17.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Housing length | 289 mm |
Weight | 0.344 kg |
Stroke | 206 mm |
Eject Force | 240 N |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.290 kg |
Thickness | 89 mm. 57.5 mm |
Inner diameter | 12.4 mm |
Function | Bushing, axle beam |
Outer diameter | 80 mm. 69.5 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.050 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 37624 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Steering | with tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (21283)
- 1x Febi Inner Tie Rod (22765)
Important compatibility info
Weight | 1.4 kg |
Placement on Vehicle | Rear |
Length | 270 mm |
Type | Spring, driver cab suspension |
Function | Spring, driver cab suspension |
Outer diameter | 73 mm. 65.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 135 mm |
Outer diameter | 114 mm |
Additional Information 2 | with seal ring |
Spanner Size | 36 |
Weight | 0.26 kg |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 25 Nm |
Type | Cover, fuel filter |
Function | Cover, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 149 mm |
Function | Tie Rod End |
External Thread Size | M30 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Weight | 1.7 kg |
Additional Information 2 | with crown nut |
Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.095 kg |
Type | Injector, urea injection |
Function | Injector, urea injection |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.111 kg |
Material | Plastic |
Colour | Black |
Number of Connectors / Ports | 5 |
Control Type | Rotary Operation |
Function | Ignition Switch |
Extra Description | febi Plus |
Type | Ignition Switch |
Additional Information 2 | with cable, with plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 3.5 kg |
Outer diameter | 240 mm |
Thickness | 40 mm |
Brake Disc Thickness | 11 mm |
Minimum thickness | 9.2 mm |
Bolt Hole Circle Diameter | 98 mm |
Centering Diameter | 59 mm |
Surface | Coated |
Function | Brake Disc |
Type | Brake Disc Rotor |
Rim Hole Number | 4 -Hole |
Replaces | 17939 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.10 kg |
Function | Thermostat, coolant |
Outer diameter | 64 mm |
Opening Temperature | 78 °C |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Additional Information 2 | with oil sump gasket |
Length | 144 mm |
Height | 60 mm |
Width | 140 mm |
Filter type | Screen Filter |
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Placement on Vehicle | Rear Axle |
Outer diameter | 179 mm |
Inner diameter | 165 mm |
Weight | 0.390 kg |
Number of Teeth, ABS ring | 100 |
Type | Sensor Ring, ABS |
Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 172155 |
Number of Connectors / Ports | 2 |
Cable Length | 1300 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Weight | 0.074 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023