Important compatibility info
| Placement on Vehicle | both sides |
| Length | 536 mm |
| Housing Diameter | 19 mm |
| Eject Force | 540 N |
| Stroke | 210 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 293.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Stroke | 283 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, bonnet |
| Housing length | 382 mm |
| Length | 721 mm |
| Housing Diameter | 18 mm |
| Eject Force | 180 N |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 25 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 6 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with clamps |
| Turbocharger line | Turbocharger to charge air cooler |
| Function | Charge Air Hose |
| Inner diameter | 51 mm |
| Placement on Vehicle | Upper |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (103703)
- 1x Febi Hose Clamp (48353)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 2471 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.4 mm |
| Width | 51 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 171558 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 685 mm |
| Housing Diameter | 18 mm |
| Eject Force | 330 N |
| Stroke | 241 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, front panel |
| Function | Gas Spring, front panel |
| Housing length | 365 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| ABS Ring Diameter | 78 mm |
| Number of Teeth, ABS ring | 29 |
| Internal Teeth, wheel side | 22 |
| External Teeth, Wheel Side | 22 |
| Thread Size | M20 x 1,0 |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| Internal Teeth, wheel side | 26 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Joint Kit, drive shaft |
| Thread Size | M22x1,5 |
| Type | Joint Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Teeth, Wheel Side | 26 |
| Internal Teeth, wheel side | 22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Internal Teeth, wheel side | 22 |
| External Teeth, Wheel Side | 26 |
| Thread Size | M22x1,5 |
| Number of Teeth, ABS ring | 43 |
| ABS Ring Diameter | 93 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 24 |
| Internal Teeth, wheel side | 27 |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| ABS Ring Diameter | 73 mm |
| Placement on Vehicle | Wheel Side, Front Axle Right, Front Axle Left |
| Number of Teeth, ABS ring | 48 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 2300 mm |
| Paired article numbers | 103770 |
| Additional Information | with bush |
| Placement on Vehicle | Front Axle Right |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod End |
| Extra Description | ProKit |
| Cone Size | 20.2 mm |
| Type | Tie Rod End |
| External Thread Size | M20 x 1 |
| Thread Type | with right-hand thread |
| Additional Information 2 | with crown nut |
| Length | 81 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with clamp |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 28250-4A000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 10.75 mm |
| Function | Tie Rod |
| External Thread Size | M10 x 1 |
| Length | 400 mm |
| Placement on Vehicle | Front Axle, Centre |
| Type | Tie Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Paired article numbers | 176573 |
| Placement on Vehicle | Right |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


















