Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 610 mm |
| Weight | 13.920 kg |
| Pipe Diameter | 50 mm |
| Placement on Vehicle | Rear Axle |
| Hole Pitch 1/ Hole Pitch 2 | 152/152 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | febi Plus |
| Steering arm type | Trailing Arm |
| Bore Diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.96
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 105 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 5.04 kg |
| Current Strength | 105 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.95
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| Weight | 0.041 kg |
| Number of Connectors / Ports | 5 |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.87
Important compatibility info
| Function | Cylinder Head Cover |
| Weight | 3.237 kg |
| Height | 147 mm |
| Width | 329 mm |
| Length | 697 mm |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.84
Important compatibility info
| Function | Timing Chain Kit |
| Weight | 0.72 kg |
| Type | Timing Chain Kit |
| for OE number | 24321-04005 S1 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 122 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (177813)
- 1x Febi Tensioner, timing chain (179358)
- 1x Febi Guide, timing chain (179397)
- 1x Febi Guide, timing chain (179400)
£155.82
Important compatibility info
| Height | 146 mm |
| Outer diameter | 108 mm |
| Inner diameter | 88 mm |
| Number of Connectors / Ports | 3 |
| Function | Water Separator, fuel system |
| Weight | 0.27 kg |
| Type | Water Separator, fuel system |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.77
Important compatibility info
| Material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 12 |
| Seal Material | Rubber/Metal, Rubber |
| Weight | 10.8 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.68
Important compatibility info
| Extra Description | febi Plus |
| Weight | 3.24 kg |
| Placement on Vehicle | Rear |
| Function | Door Lock, driver cab |
| Type | Door Lock, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.66
Important compatibility info
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Weight | 2.361 kg |
| Length | 128 mm |
| Height | 129 mm |
| Width | 128 mm |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.61
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Weight | 0.787 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Number of Teeth | 46 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.60
Important compatibility info
| Placement on Vehicle | Lower, Front, Front Axle Right, Front Axle Left |
| Material | Rubber/Metal |
| Outer diameter | 79.5 mm |
| Thickness | 80 mm |
| Additional Information 2 | with mounting sleeve |
| Inner diameter | 14.2 mm |
| Paired article numbers | 182262 |
| Weight | 0.604 kg |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| for OE number | 213 333 09 00 |
| Caster correction | +3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.55
Important compatibility info
| Weight | 8.0 kg |
| External Thread Size | M30 x 1,5 |
| Placement on Vehicle | Front Axle |
| Steering arm type | Trailing Arm, Control Arm |
| Cone Size | 42 mm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.55
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Function | Timing Chain Kit |
| Number of Chain Links | 110 |
| Weight | 0.849 kg |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (186500)
- 1x Febi Tensioner, timing chain (186176)
- 1x Febi Guide, timing chain (186178)
- 1x Febi Guide, timing chain (186179)
£155.54
Important compatibility info
| Material | PA (polyamide) |
| Heating / Cooling | with jiggle pin |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Weight | 3.911 kg |
| Additional Information | with gasket/seal |
| Function | Cylinder Head Cover |
| Colour | black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.44
Important compatibility info
| Weight | 1.84 kg |
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 188 |
| Timing Chain Size | G68VCO |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25167)
- 1x Febi Guide, timing chain (47399)
- 1x Febi Tensioner, timing chain (01583)
- 1x Febi Seal Ring (05552)
- 1x Febi Guide, timing chain (44623)
- 1x Febi Guide, timing chain (47387)
£155.42
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Max. Length | 429 mm |
| Operating Mode | Mechanical |
| Weight | 4.0 kg |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.41
Important compatibility info
| Weight | 4.73 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 710 mm |
| Min. Length | 445 mm |
| Pipe Diameter | 70 mm. 60 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Replaces | 20130 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.38
Important compatibility info
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Min. Length | 413 mm |
| Pipe Diameter | 60 mm. 45 mm |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 703 mm |
| Shock Absorber Type | Oil Pressure |
| External Thread Size | M14 x 1,5 |
| Weight | 2.77 kg |
| Mounting points diameter | 20 mm |
| Placement on Vehicle | Front Axle |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.35
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.051 kg |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.29
Important compatibility info
| Weight | 1.0 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 186753 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.26
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023