Important compatibility info
| Height | 84 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| for OE number | 77 00 109 812 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| Paired article numbers | 180725 |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Stabiliser Bar, suspension |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with coupling rod |
| Stabiliser Diameter | 27 mm |
| Additional Information | with rubber mounts |
| Function | Stabiliser Bar, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174336)
- 2x Febi Mounting, stabiliser bar (10022)
- 2x Febi Link/Coupling Rod, stabiliser bar (39895)
- 2x Febi Screw (37265)
- 2x Febi Screw (38298)
- 2x Febi Nut (22263)
Important compatibility info
| Extra Description | Basic Short Kit |
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 82 |
| Timing Chain Size | G68HRF-5 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (180442)
- 1x Febi Tensioner, timing chain (188704)
- 1x Febi Guide, timing chain (184853)
- 1x Febi Gear, injection pump (187770)
Important compatibility info
| Function | Oil Pump |
| Timing Chain Size | G68V |
| Type | Oil Pump |
| Additional Information | with oil pump chain, with slide rail |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pump (19062)
- 1x Febi Chain, oil pump drive (09442)
- 1x Febi Rail, oil pump drive chain (25302)
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Control Valve |
| Type | Coolant Control Valve |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Caster correction | -3 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Lower, Front, Front Axle Right, Front Axle Left |
| Type | Mounting, control/trailing arm |
| for OE number | 213 333 08 00 |
| Material | Rubber/Metal |
| Outer diameter | 79.5 mm |
| Thickness | 80 mm |
| Additional Information 2 | with mounting sleeve |
| Inner diameter | 14.2 mm |
| Paired article numbers | 182263 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front, Front Axle Right, Front Axle Left |
| Material | Rubber/Metal |
| Outer diameter | 79.5 mm |
| Thickness | 80 mm |
| Additional Information 2 | with mounting sleeve |
| Inner diameter | 14.2 mm |
| Paired article numbers | 182262 |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| for OE number | 213 333 09 00 |
| Caster correction | +3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 152 mm |
| Steering arm type | Trailing Arm |
| Length | 605 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| External Teeth, Diff.Side | 27 |
| External Teeth, Wheel Side | 28 |
| Thread Size | M22 x 1,5 |
| Additional Information | with Split Pin, with axle nut |
| Placement on Vehicle | Front Axle Left |
| Min. Length | 634 mm |
| Type | Drive Shaft |
| Paired article numbers | 193518 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 87.5 mm |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Additional Information | with axle nut |
| Thread Size | M24x1,5 |
| Paired article numbers | 183821 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 29 |
| Min. Length | 620 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Alternator Charge Current | 110 A |
| Pulleys | with freewheel belt pulley |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Function | Alternator |
| Type | Alternator |
| Current Strength | 110 A |
| Belt Pulley Diameter | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Standard Medium Kit |
| Function | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 106 |
| Timing Chain Size | G67HR |
| for sprocket height (incl. body) | 33 mm |
| Type | Timing Chain Kit |
| Thickness | 33 mm |
Additional Information

General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (30668)
- 1x Febi Tensioner, timing chain (101097)
- 1x Febi Guide, timing chain (101098)
- 1x Febi Guide, timing chain (101099)
- 1x Febi Gear/Sprocket, camshaft (25469)
- 1x Febi Sprocket, crankshaft (101101)
- 3x Febi Bolt, camshaft gear (180594)
- 3x Febi Bolt, camshaft gear (180595)
Important compatibility info
| Extra Description | febi Plus |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 143 mm |
| Width | 143 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Inner diameter | 30 mm |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
| Paired article numbers | 105907 |
| Function | Window Regulator |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Front |
| Operating Mode | Electric |
| Paired article numbers | 105906 |
| Function | Window Regulator |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear, Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 630 mm. 161 mm |
| Type | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 227 mm. 260 mm |
| Additional Information | with piston rod, with piston |
| Function | Bellow, air suspension |
| External Thread Size | 1/2" - 13 UNC, 3/4" - 16 UNF, 1/4" - 18 NPTF |
| Rolling piston material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 67.6 mm |
| Additional Information 2 | with seal ring |
| Opening Temperature | 77 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 183419 |
| Number of Connectors / Ports | 2 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 183418 |
| Number of Connectors / Ports | 2 |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 635 mm |
| Min. Length | 386 mm |
| Pipe Diameter | 70 mm. 80 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20348 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Driver side |
| Voltage | 24 V |
| Colour | black |
| Number of Connectors / Ports | 4 |
| Type | Multi-Function Switch |
| Function | Multi-Function Switch |
| Combi Switch Function | Mirror Adjustment, Door Locking, Folding/tilting exterior mirrors, Heated wing mirror on/off, Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 585 mm |
| Hole Spacing | 152 mm |
| Placement on Vehicle | Rear Axle |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 723 mm |
| Min. Length | 443 mm |
| Mounting points diameter | 20 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| for OE number | 006 326 60 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 353 mm |
| Min. Length | 277 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 694 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























