Important compatibility info
| Placement on Vehicle | Rear Axle Middle, Rear |
| Material | Rubber/Metal |
| Thickness | 60 mm |
| Function | Mounting, differential |
| Inner diameter | 16 mm |
| Outer diameter | 75.03 mm |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bushing, axle beam |
| Thickness | 91 mm |
| Material | Rubber/Metal |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Function | Coolant Flange |
| Additional Information | with gasket/seal |
| Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Expansion Tank, coolant |
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with brake caliper screws, with fastening material |
| Wear Warning Contact | with acoustic wear warning |
| Placement on Vehicle | Front Axle |
| Length | 150.9 mm |
| Width | 57.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 181010 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1090 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 76.5 mm |
| Height | 91.5 mm |
| Additional Information 2 | with seal ring |
| Tightening Torque | 25 Nm |
| Bolt Head/Nut Design | External Hexagon |
| Extra Description | febi Plus |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 34 mm |
| Outer diameter | 70 mm |
| Number of Teeth | 22 |
| Width | 29 mm |
| Placement on Vehicle | Front |
| Engine Management | Timing Belt |
| Function | Sprocket, crankshaft |
| Type | Sprocket, crankshaft |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (25172)
- 1x Febi Pulley Bolt (17230)
Important compatibility info
| Function | Chain, oil pump drive |
| Timing Chain Size | Z53R |
| Number of Chain Links | 44 |
| Chain Type | Silent Chain, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1844.77 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length from grip collar to min. marking | 1144 mm. 1095 mm |
| Length from grip collar to max. marking | 1133 mm. 1089 mm |
| Function | Oil Dipstick, automatic transmission |
| Extra Description | febi Plus |
| Additional Information 2 | with bolts |
| Type | Oil Dipstick, automatic transmission |
| Colour | Red |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Dipstick, automatic transmission (38023)
- 5x Febi Locking Pin, auto. trans. dipstick sealing piece (44204)
Important compatibility info
| Length | 170 mm |
| Width | 155 mm |
| Material | Rubber/Metal |
| Inner diameter | 14 mm |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 56 mm |
| Outer diameter | 99 mm. 151 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 87 mm |
| Width | 52.9 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Upper |
| Material | Rubber/Metal |
| Outer diameter | 114 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 49 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket Set, cylinder head cover |
| for OE number | 11 12 8 511 814 |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 154 mm |
| Inner diameter | 16 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 70 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 240 mm |
| Number of circuits | 4 |
| Type | Cable Repair Set, thermostat |
| Function | Cable Repair Set, thermostat |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Additional Information 2 | with pre-filter |
| Height | 47 mm |
| Length | 405 mm |
| Width | 159 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Rear |
| for OE number | 12364-0M050 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 340 mm |
| Number of Connectors / Ports | 2 |
| Cable Length | 275 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 15 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | excl. wear warning contact |
| Width | 66.5 mm |
| Length | 104.4 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 157 mm |
| Width | 58.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Rear Axle |
| Wear Warning Contact | prepared for wear warning indicator |
| Width | 59 mm |
| Length | 106.2 mm |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 352 mm |
| Function | Suspension Spring |
| Wire Diameter | 11.8 mm |
| Type | Suspension Spring |
| Outer diameter | 149 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 52 mm |
| Width | 37 mm |
| Placement on Vehicle | Rear Axle |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 25 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174482)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bulb Fitment Code | H4 |
| Bulb Type | H4 |
| Fulfils ECE norm | R37 |
| Function | Bulb / Bulb, headlight |
| Type | Bulb / Bulb, headlight |
| Rated Power | 75 W, 70 W |
| Voltage | 24 V |
| Base design light bulb | P43t-38 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Centre |
| Length | 110 mm |
| Width | 93 mm |
| Thickness | 34 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 76 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| for OE number | 1661993 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 25 mm |
| Outer diameter | 62 mm |
| Inner diameter | 30 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
| Bearing Code | 33206 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 102.2 mm |
| Width | 42.8 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 12.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 40.2 mm |
| Thickness | 140 mm |
| Inner diameter | 14 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Placement on Vehicle | Lower, Front Axle Right, Front Axle Left, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 30 mm |
| Length | 230 mm |
| Width | 208 mm |
| Filter type | Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 100 mm |
| Inner diameter | 19 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 80 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 258 mm |
| Width | 60 mm |
| Thickness | 90 mm |
| Spanner Size | 22 |
| Paired article numbers | 36585 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 2385 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front, Right Front |
| Length | 135 mm |
| Width | 85 mm |
| Thickness | 78 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 169 240 15 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Inner diameter | 15 mm |
| Outer diameter | 56 mm |
| Length | 89.5 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage to | 35 V |
| Function | Relay, wipe/wash interval |
| Number of Connectors / Ports | 6 |
| Voltage from | 20 V |
| Type | Relay, wipe/wash interval |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Spring, driver cab suspension |
| Thickness | 252 mm |
| Placement on Vehicle | Front, Rear |
| Outer diameter | 87 mm |
| Function | Spring, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | EMC |
| Width | 90 mm |
| Height | 31 mm |
| Port / Connector type | PRS |
| Voltage to | 24 V |
| Voltage from | 12 V |
| Function | Licence Plate Light |
| Fulfils ECE norm | R4, R10 |
| Protection Type (IP Code) | IP67 |
| Light Design | LED |
| Mounting Type | Bolted |
| Cable Length | 500 mm |
| Depth | 46 mm |
| Type | Licence Plate Light |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 175283 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 116.5 mm |
| Width | 57.3 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
| Replaces | 16374 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 299 mm |
| Eject Force | 730 N |
| Stroke | 66 mm |
| Housing Diameter | 19 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 18 mm |
| Housing length | 204 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 330 mm |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 630 mm |
| Outer diameter | 18 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Cable Length | 560 mm |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Length | 2108 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with retaining spring holder |
| Placement on Vehicle | Front Axle |
| Length | 132.8 mm |
| Width | 60 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting points diameter | 10 mm |
| Material | Plastic |
| Outer diameter | 62 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
| Replaces | 37703 |
| Inner diameter | 10 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































