Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.92 kg |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Additional Information | with grease |
| Additional Information 2 | with clamps |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 63 mm |
| Inner diameter 1 | 25 mm |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Length | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Split Sleeve (08461)
- 1x Febi Split Sleeve (08462)
- 1x Febi Seal Ring (08463)
- 1x Febi Seal Ring (08464)
- 1x Febi Molybdenum Grease (08414)
£21.14
Important compatibility info
| Weight | 0.177 kg |
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| Replaces | 10508 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 500 mm |
| Housing Diameter | 18 mm |
| Eject Force | 470 N |
| Stroke | 205 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 269.5 mm |
| Weight | 0.237 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 253 mm |
| Outer diameter | 104 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 11 mm |
| Weight | 1.25 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.281 kg |
| Length | 1670 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Housing Diameter | 18 mm |
| Length | 473 mm |
| Placement on Vehicle | both sides |
| Eject Force | 430 N |
| Stroke | 179 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 262 mm |
| Weight | 0.25 kg |
| Mounting points diameter | 16.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.46 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| for OE number | 31 33 6 752 735 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (19448)
£21.14
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 30 mm |
| Outer diameter | 185 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 3.5 mm |
| Function | Brake Shoe Set, parking brake |
| Weight | 1.40 kg |
| Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 1.16 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (15870)
- 1x Febi Rolling Bearing, suspension strut support mount (22498)
£21.14
Important compatibility info
| Inner diameter 2 | 90 mm |
| Function | Intake Hose, air filter |
| Inner diameter 1 | 77 mm |
| Material | NBR (nitrile butadiene rubber) |
| Weight | 0.222 kg |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Number of Ribs | 9 |
| Function | V-Ribbed Belt |
| Length | 1936 mm |
| Weight | 0.240 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.045 kg |
| Fill Medium | Brake Fluid |
| Function | Compensation Tank, clutch |
| for OE number | 85104752 |
| Type | Compensation Tank, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Additional Information | with axle nut |
| Outer diameter | 70 mm |
| Additional Information 2 | with retaining ring |
| Inner diameter | 38 mm |
| Weight | 0.652 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.59 kg |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 80.5 mm |
| Thickness | 68 mm |
| Inner diameter | 19 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Function | Brake Hose |
| Length | 220 mm |
| Weight | 0.143 kg |
| External Thread Size | M10 x 1, M12 x 1 |
| Additional Information 2 | with banjo bolt |
| Placement on Vehicle | Rear Axle Left |
| Type | Brake Hose |
| Paired article numbers | 45212 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 0.391 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.76 kg |
| Width | 20 mm |
| Outer diameter | 47 mm |
| Inner diameter | 18 mm. 12 mm |
| Paired article numbers | 36821 |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.05 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 675 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Function | Mounting, control/trailing arm |
| Inner diameter | 12 mm |
| Thickness | 70 mm |
| Outer diameter | 51 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Mounting, control/trailing arm |
| Weight | 0.282 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Material | Thermoplast |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 88 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.520 kg |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29956)
- 1x Febi Axle Bolt, drive shaft (40617)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
£21.14
Important compatibility info
| Weight | 0.39 kg |
| Extra Description | ProKit |
| Height | 134 mm |
| Width | 109 mm |
| Rated Power | 15 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 39 mm |
| Voltage from | 10 V |
| Light Distribution | Long-range illumination |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Fulfils ECE norm | R10, R23 |
| Lumen | 1200 lm |
| Temperature range from | -40 °C |
| Temperature range to | 50 °C |
| Function | Worklight |
| Inspection Tag | EMC |
| Housing material | Aluminium |
| Additional Information | with fastening/mounting material |
| Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| External Thread Size | M16 x 1,5, M42 x 1,5 |
| Weight | 0.824 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Ball Joint |
| Cone Size | 44.5 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 1.73 kg |
| Placement on Vehicle | Front Axle |
| Length | 131.6 mm |
| Width | 59.9 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.9 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Inner diameter | 32 mm |
| Thickness | 160 mm |
| Weight | 0.37 kg |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.09 kg |
| Function | Exhaust Valve |
| Valve head diameter | 39 mm |
| Valve stem diameter | 9 mm |
| Length | 115.8 mm |
| Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.013 kg |
| for OE number | 98 000 384 80 |
| Type | Sensor, wheel speed |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.61 kg |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing |
| Inner diameter | 42 mm |
| Outer diameter | 75 mm |
| Width | 37 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.1 kg |
| Placement on Vehicle | Rear Axle Left, Outer, Rear Axle Right |
| Length | 271 mm |
| Function | Brake Hose |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 270 mm |
| Function | Inner Tie Rod |
| Weight | 0.410 kg |
| External Thread Size | M14 x 2, M14 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with counter nut |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Height | 69 mm |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Weight | 0.163 kg |
| Function | Fuel filter |
| Inner diameter | 49 mm |
| Seal Diameter | 130.5 mm |
| Additional Information 2 | with seal ring |
| Outer diameter | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Inner diameter 1 | 48 mm |
| Inner diameter 2 | 53 mm |
| Outer diameter 1 | 58 mm |
| Outer diameter 2 | 63 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Weight | 0.224 kg |
| Placement on Vehicle | Charge Air Cooler, Right |
| Turbocharger line | Turbocharger to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Outer diameter | 25 mm |
| Opening Temperature | 90 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Weight | 0.09 kg |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.134 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1650 Ohm |
| Cable Length | 1355 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 108.9 mm |
| Width | 42 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.8 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 0.91 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Length | 2235 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Weight | 0.228 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Weight | 0.06 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.67 kg |
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 3C0 199 855 M |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Additional Information | with rubber-metal mounts |
| Weight | 0.61 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.19 kg |
| Outer diameter | 64 mm |
| Thickness | 10.5 mm |
| Inner diameter | 16 mm |
| Function | Shaft Seal, manual transmission |
| Type | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.062 kg |
| Number of Connectors / Ports | 2 |
| Cable Length | 932 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 567 mm |
| Housing Diameter | 19 mm |
| Eject Force | 520 N |
| Stroke | 230 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 308.5 mm |
| Weight | 0.335 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Length | 167 mm |
| Height | 28 mm |
| Width | 138 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information 2 | with oil sump gasket |
| Type | Hydraulic Filter Kit, automatic transmission |
| Weight | 0.316 kg |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.13
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter | 60 mm |
| Colour | Red |
| Function | Radiator Hose |
| Weight | 0.12 kg |
| Outer diameter 2 | 73 mm |
| Outer diameter 1 | 62 mm |
| Extra Description | ProKit |
| Additional Information 2 | with clamps |
| Type | Radiator Hose |
| Hose Length | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (35897)
- 2x Febi Hose Clamp (48356)
£21.12
Important compatibility info
| Steering arm type | for control arm |
| External Thread Size | M14 x 1,5 |
| Weight | 0.842 kg |
| Type | Ball Joint |
| Function | Ball Joint |
| Placement on Vehicle | Front Axle Left, Front Axle Right, outer |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.12
Important compatibility info
| Pipe Diameter | 51 mm |
| Thread Type | with left-hand thread |
| Cone Size | 25 mm |
| External Thread Size | M20 x 1,5, M30 x 1,5 LHT |
| Weight | 1.165 kg |
| Placement on Vehicle | Front Axle |
| Length | 117 mm |
| Extra Description | ProKit |
| Additional Information | with lock nut |
| Type | Angled Ball Joint, steering drag link / Tie Rod End |
| Function | Angled Ball Joint, steering drag link / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.12
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 52 mm |
| Function | Bushing, stabiliser coupling rod |
| Type | Bushing, stabiliser coupling rod |
| Inner diameter | 16.5 mm |
| Outer diameter | 50 mm |
| Material | Rubber/Metal |
| Weight | 0.317 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.12
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1772 mm |
| Weight | 0.240 kg |
| Number of Ribs | 10 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.12
Important compatibility info
| Weight | 1.49 kg |
| Placement on Vehicle | Rear Axle |
| Width | 29 mm |
| Outer diameter | 200 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.12
Important compatibility info
| Weight | 1.506 kg |
| Placement on Vehicle | Rear Axle |
| Length | 113.7 mm |
| Width | 62.8 mm |
| Brake System | TRW |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.12
Important compatibility info
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Length | 1194 mm |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
| Weight | 0.113 kg |
| Alternator type | for starter generator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.11
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023