Important compatibility info
Weight | 0.61 kg |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing |
Inner diameter | 42 mm |
Outer diameter | 75 mm |
Width | 37 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 500 mm |
Housing Diameter | 18 mm |
Eject Force | 470 N |
Stroke | 205 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 269.5 mm |
Weight | 0.237 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Charge Air Cooler, Left |
Outer diameter | 64 mm |
Weight | 0.421 kg |
Inner diameter | 54 mm |
Function | Charge Air Hose |
Turbocharger line | Charge air cooler to intake manifold |
Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
Weight | 0.391 kg |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber-metal mounts |
Weight | 0.61 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 675 mm |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.1 kg |
Placement on Vehicle | Rear Axle Left, Outer, Rear Axle Right |
Length | 271 mm |
Function | Brake Hose |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Inner diameter | 12 mm |
Thickness | 70 mm |
Outer diameter | 51 mm |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Mounting, control/trailing arm |
Weight | 0.282 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 2 | 90 mm |
Function | Intake Hose, air filter |
Inner diameter 1 | 77 mm |
Material | NBR (nitrile butadiene rubber) |
Weight | 0.222 kg |
Extra Description | febi Plus |
Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.465 kg |
Placement on Vehicle | both sides |
Length | 570 mm |
Eject Force | 910 N |
Stroke | 235 mm |
Housing length | 313 mm |
Mounting points diameter | 18 mm |
Housing Diameter | 22 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Fill Medium | Brake Fluid |
Function | Compensation Tank, clutch |
for OE number | 85104752 |
Type | Compensation Tank, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.087 kg |
Function | Rocker Arm, engine timing |
Type | Rocker Arm, engine timing |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rocker Arm, engine timing (05828)
- 1x Febi Thrust Piece, intake/exhaust valve (06573)
- 1x Febi Adjusting Disc, valve clearance (05174)
- 1x Febi Bolt, rocker arm shaft (05173)
- 1x Febi Counter Nut, valve clearance adjusting screw (05176)
Important compatibility info
Weight | 0.76 kg |
Width | 20 mm |
Outer diameter | 47 mm |
Inner diameter | 18 mm. 12 mm |
Paired article numbers | 36821 |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Right |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 167 mm |
Height | 28 mm |
Width | 138 mm |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information 2 | with oil sump gasket |
Type | Hydraulic Filter Kit, automatic transmission |
Weight | 0.211 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 51 mm |
Thread Type | with left-hand thread |
Cone Size | 25 mm |
External Thread Size | M20 x 1,5, M30 x 1,5 LHT |
Weight | 1.165 kg |
Placement on Vehicle | Front Axle |
Length | 117 mm |
Extra Description | ProKit |
Additional Information | with lock nut |
Type | Angled Ball Joint, steering drag link / Tie Rod End |
Function | Angled Ball Joint, steering drag link / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.106 kg |
Length | 253 mm |
Additional Information 2 | with seal ring |
Spanner Size | 27 |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 24 Nm |
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.506 kg |
Placement on Vehicle | Rear Axle |
Length | 113.7 mm |
Width | 62.8 mm |
Brake System | TRW |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.8 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Inner diameter | 60 mm |
Colour | Red |
Function | Radiator Hose |
Weight | 0.12 kg |
Outer diameter 2 | 73 mm |
Outer diameter 1 | 62 mm |
Extra Description | ProKit |
Additional Information 2 | with clamps |
Type | Radiator Hose |
Hose Length | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (35897)
- 2x Febi Hose Clamp (48356)
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1772 mm |
Weight | 0.240 kg |
Number of Ribs | 10 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | for control arm |
External Thread Size | M14 x 1,5 |
Weight | 0.842 kg |
Type | Ball Joint |
Function | Ball Joint |
Placement on Vehicle | Front Axle Left, Front Axle Right, outer |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023