Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter | 127 mm |
| Type | Protection Lid, wheel hub |
| Height | 50 mm |
| Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.04
Important compatibility info
| Length | 205 mm |
| Height | 50 mm |
| Width | 145 mm |
| Additional Information 2 | with oil sump gasket |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.04
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 600 mm |
| Housing Diameter | 18 mm |
| Eject Force | 440 N |
| Stroke | 177 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 382.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Function | Pump, fuel pre-supply |
| Type | Pump, fuel pre-supply |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Cone Size | 30 mm |
| Internal Thread Size | M30 x 1,5 |
| Placement on Vehicle | Front Axle Left, Rear Axle |
| Thread Type | with left-hand thread |
| Length | 120 mm |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| External Thread Size | M24 x 1,5 |
| Pipe Diameter | 40 mm |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Inner diameter | 27 mm |
| Filter type | Filter Insert |
| Outer diameter | 67 mm |
| Additional Information 2 | with seal ring |
| Seal Diameter | 95 mm |
| Function | Fuel filter |
| Height | 199 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Inner diameter | 17 mm |
| Type | Bushing, axle beam |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Thickness | 84 mm |
| Outer diameter | 94 mm |
| Placement on Vehicle | Rear, Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Additional Information 2 | with seal ring |
| Outer diameter | 89 mm |
| Height | 211 mm |
| Inner diameter | 41 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 61 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
| Inner diameter | 12.4 mm |
| Material | Rubber/Metal |
| Outer diameter | 60.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Function | Exhaust Valve |
| Length | 161 mm |
| Type | Exhaust Valve |
| Notches / Holes Number | 3 |
| Valve head diameter | 38 mm |
| Valve stem diameter | 8.965 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.03
Important compatibility info
| Function | Finger Follower, engine timing |
| Type | Finger Follower, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.02
Important compatibility info
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Length | 2650 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Resistance | 1200 Ohm |
| Cable Length | 2500 mm |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.02
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 107471 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Cable Length | 1080 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.02
Important compatibility info
| for OE number | 123 410 10 81 S1 |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (05263)
£21.01
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 108.6 mm |
| Width | 42.8 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.01
Important compatibility info
| Housing length | 212 mm |
| Placement on Vehicle | both sides |
| Length | 387 mm |
| Eject Force | 465 N |
| Stroke | 139 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 16.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.01
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
| Length | 220 mm |
| Diameter | 1 mm |
| Material | Steel |
| Thickness | 260 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.01
Important compatibility info
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Length | 134 mm |
| Width | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.01
Important compatibility info
| Length | 246 mm |
| Height | 30 mm |
| Width | 206 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.00
Important compatibility info
| Tightening Torque | 25 Nm |
| Function | Cap, oil filter housing |
| Outer diameter | 89.4 mm |
| Bolt Head/Nut Design | External Hexagon |
| Spanner Size | 32 |
| Height | 58.6 mm |
| Manufacturer's restriction oil filter housing | Purflux |
| Extra Description | febi Plus |
| Type | Cap, oil filter housing |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.00
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023