Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.10
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 98.6 mm |
| Width | 42.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.10
Important compatibility info
| Joint Type | Tripod Joint |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 111 mm |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172949)
- 1x Febi Molybdenum Grease (02582)
£21.10
Important compatibility info
| Length | 253 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 27 |
| Bolt Head/Nut Design | External Hexagon |
| Tightening Torque | 24 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.10
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| Length | 106 mm |
| Material | Thermoplast |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 64 mm |
| Joint Type | Tripod Joint |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175237)
- 1x Febi Molybdenum Grease (02582)
£21.10
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Sensor, boost pressure |
| Function | Sensor, boost pressure |
| for OE number | 038 906 051 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.10
Important compatibility info
| Number of Teeth, ABS ring | 100 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
| Outer diameter | 178 mm |
| Inner diameter | 163 mm |
| Placement on Vehicle | Front Axle |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.10
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 25 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Shoe Set, parking brake |
| Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.09
Important compatibility info
| for OE number | 123 410 10 81 S1 |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (05263)
£21.09
Important compatibility info
| Height | 320 mm |
| Outer diameter | 198 mm |
| Inner diameter | 165 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.09
Important compatibility info
| Function | Mount, exhaust system |
| Placement on Vehicle | Front |
| Material | MVQ (silicone rubber), Steel |
| Type | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.09
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 38 mm |
| Outer diameter | 79 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Additional Information 2 | with retaining ring |
| Additional Information | with axle nut |
| Inner diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.09
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 596 mm |
| Housing Diameter | 19 mm |
| Eject Force | 420 N |
| Stroke | 187 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 354 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.09
Important compatibility info
| Alternator type | for starter generator |
| Length | 1061 mm |
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.09
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter 2 | 23 mm |
| Inner diameter 1 | 18 mm |
| Function | Repair Kit, stabiliser bush |
| Type | Repair Kit, stabiliser bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (14942)
- 2x Febi Mounting, stabiliser bar (17473)
- 4x Febi Nut (08565)
- 4x Febi Washer (08567)
- 4x Febi Nut (06859)
- 4x Febi Washer (01965)
£21.08
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 37729 |
| Function | Tie Rod |
| Additional Information | with lock nut |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (29224)
- 1x Febi Inner Tie Rod (28541)
£21.08
Important compatibility info
| Height | 109 mm |
| Outer diameter | 35 mm |
| Function | Hydraulic Filter, automatic transmission |
| Additional Information 2 | with lid, with seal ring |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.08
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 37730 |
| Function | Tie Rod |
| Additional Information | with lock nut |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (29223)
- 1x Febi Inner Tie Rod (28541)
£21.08
Important compatibility info
| Internal Thread Size | M8 x 1,25 |
| Length | 164 mm |
| Material | Rubber/Metal |
| Outer diameter | 83 mm |
| Inner diameter | 13 mm |
| Paired article numbers | 27456 |
| Placement on Vehicle | Front Axle Left |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 59 mm |
| Width | 151 mm |
| Additional Information 2 | without ball bearing |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.07
Important compatibility info
| Housing Diameter | 19 mm |
| Eject Force | 490 N |
| Stroke | 235 mm |
| Mounting points diameter | 18 mm |
| Housing length | 341.5 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Placement on Vehicle | both sides |
| Length | 633 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.07
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023