Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm. 155.2 mm |
| Width | 71.4 mm. 66 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.10
Important compatibility info
| Function | Pilot Bearing, clutch |
| Type | Pilot Bearing, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.10
Important compatibility info
| Seal Material | NBR (nitrile butadiene rubber) |
| Filter type | Screen Filter |
| Material | Steel |
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information 2 | with oil sump gasket |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (100129)
- 1x Febi Gasket, automatic transmission oil sump (08717)
£20.10
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 101 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 24 mm |
| Inner diameter 2 | 72 mm |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180143)
- 1x Febi Molybdenum Grease (02582)
£20.10
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Length | 882 mm |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
| Number of Ribs | 6 |
| Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.10
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Width | 58 mm |
| Placement on Vehicle | Rear Axle |
| Material | Thermoplast, PU (Polyurethane) |
| Length | 190 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (173638)
- 2x Febi Rubber Buffer, suspension (104210)
£20.09
Important compatibility info
| Length | 141.7 mm |
| Width | 55.8 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.9 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | with acoustic wear warning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.08
Important compatibility info
| Length | 248 mm |
| Outer diameter | 55 mm |
| Filter type | In-Line Filter |
| Pipe Diameter | 11 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| for OE number | 80A 127 399 B SK1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.08
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Type | Spring Seat |
| Function | Spring Seat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.08
Important compatibility info
| Steering arm type | for control arm |
| Additional Information 2 | with screw |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Type | Ball Joint |
| Function | Ball Joint |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.08
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 253 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Type | Inner Tie Rod |
| Additional Information 2 | with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.08
Important compatibility info
| Width of castor bearing surface | 34 mm |
| Number of Ribs | 7 |
| Material | Plastic |
| Outer diameter | 80 mm |
| Width | 37 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.07
Important compatibility info
| Internal Thread Size | M27 x 2 |
| Width | 135 mm |
| Thickness | 66 mm |
| Type | Protection Lid, wheel hub |
| Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.07
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 276 mm |
| Outer diameter | 117 mm |
| Function | Suspension Spring |
| Wire Diameter | 11 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.07
Important compatibility info
| Hose Length | 250 mm |
| Placement on Vehicle | Upper |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Paired article numbers | 49256 |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.07
Important compatibility info
| Placement on Vehicle | both sides, Rear |
| Length | 424 mm |
| Housing Diameter | 18 mm |
| Eject Force | 350 N |
| Stroke | 161 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 239.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.07
Important compatibility info
| Length | 240 mm |
| Paired article numbers | 28581 |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information | with counter nut |
| Cone Size | 17 mm |
| External Thread Size | M12 x 1,5, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.06
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Number of Ribs | 7 |
| Material | Plastic |
| Width of castor bearing surface | 26 mm |
| Outer diameter | 70 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.06
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 1705 mm |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.06
Important compatibility info
| Function | Stop- /Mounting Buffer |
| Type | Stop- /Mounting Buffer |
| Hole Spacing | 117 mm |
| Width | 150 mm |
| Length | 200 mm |
| Thickness | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.06
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.06
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 134.2 mm |
| Width | 64.3 mm |
| Brake System | Bosch |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.4 mm |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.05
Important compatibility info
| Additional Information 2 | with anti-squeak plate |
| Placement on Vehicle | Rear Axle |
| Length | 116.6 mm |
| Width | 45.8 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.05
Important compatibility info
| Additional Information 2 | without lid |
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.05
Important compatibility info
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
| Type | Splash Guard, brake disc |
| Paired article numbers | 175303 |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.05
Important compatibility info
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Rear, Front Axle Left, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Inner diameter | 20 mm |
| Thickness | 86 mm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.05
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 75.2 mm |
| Inner diameter | 32.1 mm |
| Type | Bush, driver cab suspension |
| Function | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.05
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 18 mm |
| Outer diameter | 65 mm |
| Inner diameter | 38 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Wheel Bearing (174066)
- 1x Febi Split Pin (173993)
- 2x Febi Shaft Seal, wheel bearing (174065)
£20.04
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 330 mm |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.04
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.03
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023