Important compatibility info
| Placement on Vehicle | Rear Axle | 
| Additional Information | with two sealing lips | 
| Material | FPM (fluoride rubber) | 
| Outer diameter | 170 mm | 
| Thickness | 11 mm | 
| Inner diameter | 139 mm | 
| Type | Shaft Seal, wheel hub | 
| Function | Shaft Seal, wheel hub | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 | 
| Placement on Vehicle | Front Axle Right | 
| Length | 210 mm | 
| Paired article numbers | 102410 | 
| Function | Tie Rod End | 
| Extra Description | ProKit | 
| External Thread Size | M14 x 1,5 | 
| Type | Tie Rod End | 
| Additional Information | with lock nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 140 mm | 
| Length | 1 m | 
| Function | Corrugated Pipe, exhaust system | 
| Type | Corrugated Pipe, exhaust system | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 131.5 mm | 
| Width | 60.2 mm | 
| Function | Brake Pad Set, disc brake | 
| Thickness/Strength 1 | 16.4 mm | 
| Inspection Tag | ECE R90 Approved | 
| Wear Warning Contact | excl. wear warning contact | 
| Type | Brake Pad Set, disc brake | 
| Replaces | 16915 | 
| Additional Information 2 | with fastening material | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hydraulic Filter Kit, automatic transmission | 
| Type | Hydraulic Filter Kit, automatic transmission | 
| Additional Information 2 | with oil sump gasket | 
| Length | 214.5 mm | 
| Height | 61 mm | 
| Width | 194 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with retaining ring | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Width | 39 mm | 
| Outer diameter | 71 mm | 
| Inner diameter | 38 mm | 
| Bearing Type | Angular Ball Bearing | 
| Type | Wheel Bearing Kit | 
| Function | Wheel Bearing Kit | 
| Additional Information | with axle nut | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Ribbed Belt | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Type | V-Ribbed Belt | 
| Number of Ribs | 6 | 
| Length | 1255 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Ribbed Belt | 
| Number of Ribs | 6 | 
| Length | 1194 mm | 
| Tensile Cord Material | Aramid | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Type | V-Ribbed Belt | 
| Alternator type | for starter generator | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal | 
| Function | Mount, exhaust system | 
| Type | Mount, exhaust system | 
| Placement on Vehicle | Rear | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Length | 1080 mm | 
| Function | V-Ribbed Belt | 
| Type | V-Ribbed Belt | 
| Alternator type | for starter generator | 
| Tensile Cord Material | Aramid | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | V-Ribbed Belt | 
| Function | V-Ribbed Belt | 
| Length | 1220 mm | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Number of Ribs | 6 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | V-Ribbed Belt | 
| Number of Ribs | 8 | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Alternator type | for starter generator | 
| Length | 954 mm | 
| Function | V-Ribbed Belt | 
| Tensile Cord Material | Aramid | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1057 mm | 
| Number of Ribs | 7 | 
| Tensile Cord Material | Aramid | 
| Function | V-Ribbed Belt | 
| Type | V-Ribbed Belt | 
| Alternator type | for starter generator | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | V-Ribbed Belt | 
| Function | V-Ribbed Belt | 
| Tensile Cord Material | Aramid | 
| Number of Ribs | 6 | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Alternator type | for starter generator | 
| Length | 1441 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Tensile Cord Material | Aramid | 
| Length | 1090 mm | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Number of Ribs | 7 | 
| Alternator type | for starter generator | 
| Type | V-Ribbed Belt | 
| Function | V-Ribbed Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Alternator type | for starter generator | 
| Length | 1061 mm | 
| Tensile Cord Material | Aramid | 
| Function | V-Ribbed Belt | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Number of Ribs | 6 | 
| Type | V-Ribbed Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Tensile Cord Material | Aramid | 
| Placement on Vehicle | engine sided | 
| Length | 1157 mm | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Number of Ribs | 6 | 
| Alternator type | for starter generator | 
| Type | V-Ribbed Belt | 
| Function | V-Ribbed Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Dipstick, automatic transmission | 
| Function | Oil Dipstick, automatic transmission | 
| Extra Description | febi Plus | 
| Transmission ID | 722.9 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | engine sided | 
| Length | 1038 mm | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Number of Ribs | 7 | 
| Type | V-Ribbed Belt | 
| Function | V-Ribbed Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left | 
| Number of Connectors / Ports | 2 | 
| Cable Length | 726 mm | 
| Type | Sensor, wheel speed | 
| Function | Sensor, wheel speed | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023













