Important compatibility info
| External Teeth, Wheel Side | 23 | 
| Thread Size | M18x1,5 | 
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right | 
| Internal Teeth, wheel side | 19 | 
| Function | Joint Kit, drive shaft | 
| Type | Joint Kit, drive shaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Inner diameter | 38 mm | 
| Cooling Hose | from engine to engine cooler | 
| Type | Radiator Hose | 
| Function | Radiator Hose | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut | 
| Length | 215 mm | 
| Paired article numbers | 106846 | 
| Function | Tie Rod End | 
| Placement on Vehicle | Front Axle Left | 
| Extra Description | ProKit | 
| Internal Thread Size | M14 x 1,5 | 
| Type | Tie Rod End | 
| External Thread Size | M12 x 1,5 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Seal Kit, multi-valve | 
| Type | Seal Kit, multi-valve | 
| Additional Information 2 | without spacer plate | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, air compressor (35747)
- 1x Febi Seal, air compressor (35745)
- 3x Febi Sleeve, compressed-air tank strap (35776)
- 1x Febi Seal Kit, multi-valve (35746)
- 2x Febi Screw (35755)
Important compatibility info
| Number of Connectors / Ports | 2 | 
| Cable Length | 1295 mm | 
| Function | Sensor, wheel speed | 
| Placement on Vehicle | Front Axle Left, Front Axle Right | 
| Type | Sensor, wheel speed | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 175 mm | 
| Diameter | 12 mm | 
| Material | Cast Aluminium | 
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Rod/Strut | Coupling Rod | 
| Type | Link/Coupling Rod, stabiliser bar | 
| Function | Link/Coupling Rod, stabiliser bar | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower | 
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 02046 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with bearing | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower | 
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 02045 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | with bearing | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 | 
| Function | Sensor, crankshaft pulse | 
| Width | 47.5 mm | 
| Length | 52.5 mm | 
| Type | Sensor, crankshaft pulse | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake | 
| Thickness/Strength 1 | 18.5 mm | 
| Inspection Tag | ECE R90 Approved | 
| Width | 69 mm. 72.5 mm | 
| Length | 156.4 mm. 155.4 mm | 
| Placement on Vehicle | Front Axle | 
| Type | Brake Pad Set, disc brake | 
| Additional Information 2 | with piston clip | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 | 
| Function | Sensor, crankshaft pulse | 
| Width | 47 mm | 
| Length | 75 mm | 
| Type | Sensor, crankshaft pulse | 
| for OE number | 1920.QS | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle | 
| Length | 109.7 mm | 
| Width | 49.9 mm | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 20 mm | 
| Type | Brake Pad Set, disc brake | 
| Function | Brake Pad Set, disc brake | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 155.1 mm | 
| Width | 52.5 mm | 
| Wear Warning Contact | with acoustic wear warning | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 17.1 mm | 
| Function | Brake Pad Set, disc brake | 
| Additional Information 2 | with piston clip, with staples | 
| Type | Brake Pad Set, disc brake | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Length | 132.8 mm | 
| Width | 52.4 mm. 60 mm | 
| Inspection Tag | ECE R90 Approved | 
| Thickness/Strength 1 | 17.7 mm | 
| Type | Brake Pad Set, disc brake | 
| Function | Brake Pad Set, disc brake | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor Ring, ABS | 
| Number of Teeth, ABS ring | 100 | 
| Extra Description | febi Plus | 
| Placement on Vehicle | Rear Axle | 
| Inner diameter | 184 mm | 
| Outer diameter | 205 mm | 
| Function | Sensor Ring, ABS | 
| Material | Steel | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides | 
| Length | 500 mm | 
| Housing Diameter | 18 mm | 
| Eject Force | 500 N | 
| Stroke | 208 mm | 
| Mounting points diameter | 18 mm | 
| Piston conrod diameter | 8 mm | 
| Function | Gas Spring, boot/cargo area | 
| Housing length | 273.5 mm | 
| Housing material | Steel | 
| Type | Gas Spring, boot/cargo area | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1725 mm | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Function | V-Ribbed Belt | 
| Number of Ribs | 10 | 
| Type | V-Ribbed Belt | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right | 
| Paired article numbers | 185941 | 
| Type | Splash Guard, brake disc | 
| Function | Splash Guard, brake disc | 
| Extra Description | febi Plus | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left | 
| Type | Splash Guard, brake disc | 
| Function | Splash Guard, brake disc | 
| Extra Description | febi Plus | 
| Paired article numbers | 185936 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle | 
| Number of Connectors / Ports | 3 | 
| Brake Type | Disc Brake | 
| Cable Length | 1350 mm | 
| Type | Warning Contact, brake pad wear | 
| Function | Warning Contact, brake pad wear | 
| Parameter | Code B - Black | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                 
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















