Important compatibility info
Weight | 0.196 kg |
Length | 277.5 mm |
Outer diameter | 88.5 mm |
Additional Information 2 | with seal ring |
Tightening Torque | 25 Nm |
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Weight | 0.212 kg |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (36788)
- 2x Febi Protective Cap/Bellow, shock absorber (180463)
Important compatibility info
Weight | 1.44 kg |
Placement on Vehicle | Rear Axle |
Length | 276 mm |
Outer diameter | 117 mm |
Function | Suspension Spring |
Wire Diameter | 11 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 103 mm |
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 84 mm |
Weight | 0.201 kg |
Joint Type | Tripod Joint |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (193074)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Extra Description | febi Plus |
Type | Roller Guide, sliding door |
Function | Roller Guide, sliding door |
Weight | 0.37 kg |
Placement on Vehicle | Right, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without lid |
Weight | 0.381 kg |
Material | PP (Polypropylene) |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Colour | Black |
Number of Connectors / Ports | 4 |
Type | Sensor, intake manifold pressure |
Function | Sensor, intake manifold pressure |
Additional Information 2 | with seal ring |
for OE number | 96 393 814 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.3 kg |
Width | 15 mm |
Number of Teeth | 129 |
Function | Timing Belt Kit |
Units / Pulleys | incl. tensioner pulley |
Belts | with rounded tooth profile |
Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (17813)
- 1x Febi Tensioner Pulley, timing belt (05338)
Important compatibility info
Weight | 1.58 kg |
Placement on Vehicle | Front Axle |
Length | 139 mm |
Width | 58.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 87 °C |
Weight | 0.27 kg |
Additional Information | with gasket/seal |
Type | Thermostat, coolant |
for OE number | 7729959 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M16 x 1,5 |
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left |
Length | 222 mm |
Paired article numbers | 37692 |
Function | Tie Rod End |
Weight | 0.690 kg |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Length | 153 mm |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M12 x 1,25 |
Function | Tie Rod End |
Type | Tie Rod End |
Weight | 0.582 kg |
Paired article numbers | 180276 |
Spanner Size | 17 |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 299 mm |
Outer diameter | 133 mm |
Inner diameter | 65 mm |
Filter type | Filter Insert |
Weight | 0.590 kg |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 37 mm |
Outer diameter | 68 mm |
Inner diameter | 35 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Additional Information | with axle nut |
Weight | 0.58 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (07599)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Circlip (04687)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 330 mm |
Function | Inner Tie Rod |
External Thread Size | M16 x 1,5 |
Weight | 0.631 kg |
Additional Information | with counter nut |
Extra Description | ProKit |
Type | Inner Tie Rod |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 240 mm |
Function | Inner Tie Rod |
Weight | 0.600 kg |
Additional Information | with counter nut |
Extra Description | ProKit |
External Thread Size | M18 x 1,5, M14 x 1,5 |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 90 mm |
Width | 60 mm |
Material | PU (Polyurethane) |
Weight | 0.093 kg |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.740 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 18 mm |
Outer diameter | 65 mm |
Inner diameter | 38 mm |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Wheel Bearing (174066)
- 1x Febi Split Pin (173993)
- 2x Febi Shaft Seal, wheel bearing (174065)
Important compatibility info
Inner diameter 2 | 24 mm |
Inner diameter 1 | 27 mm |
Additional Information 2 | with clamp |
Weight | 0.37 kg |
Cooling Hose | from coolant regulator housing to engine cooler |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 500 mm |
Spanner Size | 13 |
Weight | 0.3 kg |
Housing Diameter | 19 mm |
Eject Force | 600 N |
Stroke | 200 mm |
Mounting points diameter | 8.2 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 266.5 mm |
External Thread Size | M8 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023