Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter | 100 mm |
| Placement on Vehicle | frontal sided |
| Width | 11 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Inner diameter | 80 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Material | ACM (Polyacrylate) |
| for OE number | 654 016 22 00 |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.21
Important compatibility info
| Inner diameter | 75 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.20
Important compatibility info
| Control Type | Toggle Actuation |
| Function | Hazard Warning Light Switch |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 8 |
| Type | Hazard Warning Light Switch |
| Housing Colour | Black |
| Colour | Red |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.20
Important compatibility info
| Length | 677 mm |
| Housing Diameter | 18 mm |
| Eject Force | 270 N |
| Stroke | 269 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Placement on Vehicle | Right |
| Function | Gas Spring, bonnet |
| Housing length | 378.5 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.20
Important compatibility info
| Mounting points diameter | 18 mm |
| Housing length | 327.5 mm |
| Placement on Vehicle | both sides |
| Length | 537 mm |
| Housing Diameter | 19 mm |
| Eject Force | 670 N |
| Stroke | 180 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.20
Important compatibility info
| Placement on Vehicle | Intake Side, Exhaust Side |
| Outer diameter | 12 mm |
| Thickness | 34.7 mm |
| Operating Mode | Hydraulic |
| Type | Tappet |
| Function | Tappet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.20
Important compatibility info
| for OE number | 3C0 513 425 S3 |
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (22142)
- 2x Febi Rubber Buffer, suspension (23410)
£20.20
Important compatibility info
| Placement on Vehicle | Front |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length | 292 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.20
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 557 mm |
| Housing Diameter | 18 mm |
| Eject Force | 500 N |
| Stroke | 200 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 324 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Additional Information 2 | with screw |
| Width | 22 mm |
| Material | Plastic |
| Outer diameter | 56 mm |
| Spanner Size | 15 |
| External Thread Size | M10 x 1,5 |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Function | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Outer diameter | 104 mm |
| Inner diameter | 52 mm |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle |
| Length | 77 mm |
| Material | Rubber/Metal |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, engine speed |
| Function | Sensor, engine speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 27.5 mm |
| Material | PA (polyamide) |
| Inner diameter 1 | 60 mm |
| Inner diameter 2 | 62 mm |
| Outer diameter 1 | 97 mm |
| Outer diameter 2 | 86 mm |
| Type | Rolling Bearing, suspension strut support mount |
| Function | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.19
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle |
| Function | Pitman Arm |
| Colour | Grey |
| Spanner Size | 19 |
| Length | 125 mm |
| Extra Description | ProKit |
| Type | Pitman Arm |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.18
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Cone Size | 16.2 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.18
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
| Function | Radiator Hose |
| Placement on Vehicle | Upper |
| Inner diameter | 38 mm |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.18
Important compatibility info
| Chemical Properties | Elastic |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Length | 860 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.18
Important compatibility info
| Function | Ring Gear, crankshaft |
| Inner diameter | 30 mm |
| Outer diameter | 100 mm |
| Thickness | 9.8 mm |
| Type | Ring Gear, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.17
Important compatibility info
| Min. Length | 187 mm |
| Pipe Diameter | 50 mm. 41 mm |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
| Replaces | 03892 |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Max. Length | 244 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.17
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023