Proud to be a UK-based company
Contact us
Important compatibility info
| Height | 59 mm |
| Outer diameter | 91.6 mm |
| Tightening Torque | 25 Nm |
| Function | Cap, oil filter housing |
| Manufacturer's restriction oil filter housing | Mahle |
| Bolt Head/Nut Design | External Hexagon |
| Spanner Size | 32 |
| Extra Description | febi Plus |
| Type | Cap, oil filter housing |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from heat exchanger to engine |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Additional Information | with quick coupling |
| Hose Length | 585 mm |
| Additional Information 2 | with clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Function | Tie Rod End |
| Paired article numbers | 102849 |
| Length | 94 mm |
| Placement on Vehicle | Front Axle Left |
| Type | Tie Rod End |
| Additional Information 2 | with nut |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (102846)
- 1x Febi Nut (45868)
£19.74
Important compatibility info
| Length | 1 m |
| Function | Corrugated Pipe, exhaust system |
| Inner diameter | 103 mm |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Voltage | 24 V |
| Frequency Range | 500 Hz |
| Signal | High Tone |
| Noise Level | 109 dB |
| Length | 97 mm |
| Height | 89 mm |
| Width | 107 mm |
| Type | Signal Horn |
| Function | Signal Horn |
| Operating Mode | Electric |
| Power Consumption | 100 W |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Function | Fuel filter |
| Type | Fuel filter |
| Pipe Diameter | 10 mm |
| Filter type | without water sensor, In-Line Filter, with water drain screw |
| Outer diameter | 90 mm |
| Height | 158 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 123.1 mm |
| Width | 60.9 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 51 mm |
| Outer diameter | 31 mm |
| Inner diameter | 16 mm |
| Type | Centering Sleeve, propshaft |
| Function | Centering Sleeve, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Paired article numbers | 171538 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Additional Information 2 | with retaining ring |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 39 mm |
| Outer diameter | 71 mm |
| Inner diameter | 38 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Number of Ribs | 5 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Length | 748 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Function | Mounting, engine |
| for OE number | 2 214 445 |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Function | V-Ribbed Belt |
| Alternator type | for starter generator |
| Number of Ribs | 6 |
| Length | 994 mm |
| Tensile Cord Material | Aramid |
| Type | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Number of Ribs | 6 |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1004 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Length | 1139 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Left |
| Material | Plastic |
| Paired article numbers | 193076 |
| Colour | Black |
| Type | Door Check |
| Function | Door Check |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Right Front |
| Material | Plastic |
| Paired article numbers | 193068 |
| Colour | Black |
| Type | Door Check |
| Function | Door Check |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 249 mm |
| Paired article numbers | 29610 |
| Rod/Strut | Suspension Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 249 mm |
| Paired article numbers | 29611 |
| Rod/Strut | Suspension Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right |
| Length | 120 mm |
| Material | Steel |
| Outer diameter | 27 mm. 70 mm |
| Spanner Size | 36 |
| Rod/Strut | Guide Rod |
| Colour | Grey |
| Thread Length | 85 mm |
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5, M30 x 1,5 RHT |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023