Important compatibility info
Placement on Vehicle | transmission sided |
Width | 7 mm |
Material | FPM (fluoride rubber) |
Outer diameter | 47 mm |
Inner diameter | 30 mm |
Weight | 0.12 kg |
Function | Shaft Seal, camshaft |
Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Left Front |
Weight | 0.838 kg |
Type | Mounting, engine |
for OE number | 56 82 504 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.607 kg |
Placement on Vehicle | Front Axle |
Length | 130 mm |
Width | 77.1 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with brake caliper screws, with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.82 kg |
Placement on Vehicle | Front Axle |
Length | 105 mm |
Width | 41.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Weight | 0.177 kg |
Paired article numbers | 175303 |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.068 kg |
Material | Rubber |
Paired article numbers | 18042 |
Function | Bellow, steering |
Inner diameter 2 | 44 mm |
Inner diameter 1 | 11 mm |
Length | 155 mm |
Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 84 mm. 92 mm |
Weight | 2.4 kg |
Number of Coils | 5.5 |
Type | Suspension Spring |
Function | Suspension Spring |
Length | 387 mm |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 17 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 95 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Colour | Silver |
External Thread Size | M10 x 1,25 |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.25 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.684 kg |
Placement on Vehicle | Front Axle |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (10151)
- 2x Febi Mounting, control/trailing arm (10150)
Important compatibility info
Weight | 0.72 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 385 mm |
Function | Inner Tie Rod |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M14 x 1,5 |
Additional Information | with counter nut |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 144 mm |
Placement on Vehicle | Lower Front Axle, Right |
Material | Rubber/Metal |
Outer diameter | 75 mm |
Thickness | 34 mm |
Inner diameter | 18 mm |
Paired article numbers | 21470 |
Colour Coding | Red |
Function | Mounting, control/trailing arm |
Weight | 0.640 kg |
Type | Mounting, control/trailing arm |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Holder, control arm mounting (21462)
- 1x Febi Mounting, control/trailing arm (06662)
Important compatibility info
Inner diameter | 14 mm |
Paired article numbers | 38110 |
Placement on Vehicle | Front Axle Right |
Weight | 1.07 kg |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, with ball bearing |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (36614)
- 3x Febi Screw (38107)
- 1x Febi Nut (38108)
Important compatibility info
Weight | 3.83 kg |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30433 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.216 kg |
Length | 395 mm |
Height | 30 mm |
Width | 260 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fan Wheel, engine cooling |
Outer diameter | 455 mm |
Number of Wings | 9 |
Weight | 0.57 kg |
Type | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Weight | 0.610 kg |
Function | Timing Belt Kit |
Surface | Coated |
Number of Teeth | 131 |
Width | 25 mm |
Type | Timing Belt Kit |
for OE number | 16 06 389 SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (23411)
- 1x Febi Tensioner Pulley, timing belt (21652)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (28450)
Important compatibility info
Weight | 6.8 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 302 mm |
Thickness | 46.3 mm |
Brake Disc Thickness | 18 mm |
Minimum thickness | 16 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 62 mm |
Surface | Coated |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Mechanical |
Number of Wings | 11 |
Weight | 1.958 kg |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 308 mm |
Height | 42 mm |
Width | 155 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Weight | 0.292 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Thread Length | 23.4 mm |
Rod/Strut | Coupling Rod |
Outer diameter | 9 mm |
Spanner Size | 16 |
Paired article numbers | 101913 |
Length | 284 mm |
Placement on Vehicle | Front Axle Left |
Weight | 0.37 kg |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.531 kg |
Placement on Vehicle | both sides |
Length | 686 mm |
Housing Diameter | 22 mm |
Eject Force | 460 N |
Stroke | 255 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 410 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 19 |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.350 kg |
Length | 74 mm |
Thickness | 63.7 mm |
Additional Information | with lock nut |
Type | Tie Rod End |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, air suspension |
Outer diameter | 230 mm. 197 mm |
Thickness | 435 mm |
Weight | 1.8 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Bellow, air suspension |
Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.75 kg |
Number of Connectors / Ports | 2 |
Number of mounting bores | 2 |
Mounting points diameter | 12 mm |
Function | Dryer, air conditioning |
Length | 290 mm |
Outer diameter | 52 mm |
Type | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.23 kg |
Housing Type | with housing |
Material | Plastic |
Number of Connectors / Ports | 5 |
Type | Mass Air Flow Sensor |
Resistor Type | Hot-film Sensor |
Function | Mass Air Flow Sensor |
for OE number | 13 62 7 566 986 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.366 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 154 |
Type | Timing Chain |
Part number of the recommended special tools | 193083 |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.068 kg |
Additional Information 2 | with seal ring |
Number of Connectors / Ports | 3 |
Extra Description | febi Plus |
Function | Sensor, engine oil level |
Type | Sensor, engine oil level |
for OE number | 04E 907 660 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 121 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 62 mm |
Weight | 11.3 kg |
Placement on Vehicle | Front Axle |
Length | 845 mm |
Width | 68 mm |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M38 x 1,5 RHT |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.57 kg |
Placement on Vehicle | Rear Axle |
Width | 40 mm |
Outer diameter | 228 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Piston Diameter | 20.6 mm |
Type | Brake Shoe Set |
Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.430 kg |
Placement on Vehicle | Lower, Rear |
Material | Aluminium, Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.48 kg |
Length | 297 mm |
Height | 42 mm |
Width | 235 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.0 kg |
Hole Spacing | 115 mm |
Placement on Vehicle | Front Axle, Rear Axle, Lower, Upper |
Length | 148 mm |
Width | 62 mm |
Material | Rubber/Metal |
Outer diameter | 75 mm |
Steering arm type | for trailing arm |
Mounting points diameter | 19 mm |
Type | Repair Kit, control/trailing arm |
Function | Repair Kit, control/trailing arm |
Additional Information | with spacer ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | V-Ribbed Belt |
Length | 2460 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
DIN / ISO | 7867 |
Number of Ribs | 6 |
Weight | 0.25 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, kingpin |
Additional Information | with Thrust Bearing |
Paired article numbers | 40129 |
Additional Information 2 | with bearing |
Outer diameter | 53 mm |
Length | 235 mm |
Placement on Vehicle | both sides |
Type | Repair Kit, kingpin |
Weight | 4.287 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (40730)
- 1x Febi Lock Ring, steering knuckle (40731)
- 1x Febi Lock Ring, steering knuckle (40736)
- 1x Febi Seal Ring, steering knuckle (40738)
- 1x Febi Seal Ring, steering knuckle (40737)
- 1x Febi O-Ring Repair Set (40739)
- 1x Febi Lock Ring, steering knuckle (40740)
- 4x Febi Screw (40741)
- 2x Febi Repair Kit, kingpin (40742)
- 1x Febi Grease Nipple (01096)
- 1x Febi Grease Nipple (06635)
- 1x Febi Spacer, kingpin (46436)
- 1x Febi Spacer, kingpin (46437)
- 1x Febi Spacer, kingpin (46438)
- 1x Febi Spacer, kingpin (46439)
- 1x Febi Spacer, kingpin (46440)
- 1x Febi Spacer, kingpin (46441)
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Weight | 0.248 kg |
Width | 65 mm |
Material | PU (Polyurethane) |
Length | 118 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (176381)
- 2x Febi Protective Cap/Bellow, shock absorber (45893)
Important compatibility info
Function | Mounting, stabiliser bar |
Material | Rubber |
Inner diameter | 38 mm |
Weight | 0.07 kg |
Length | 69 mm |
Thickness | 41 mm |
Width | 69 mm |
Placement on Vehicle | Front Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Weight | 0.45 kg |
Length | 164 mm |
Placement on Vehicle | Left Rear, Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Air Filter |
Weight | 0.486 kg |
Filter type | Filter Insert |
Width | 170 mm |
Height | 45 mm |
Length | 258 mm |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.403 kg |
Height | 84 mm |
Outer diameter | 407 mm |
Inner diameter | 326 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 283 mm |
Additional Information | Change interval/date according to gas spring imprint |
Function | Gas Spring, bonnet |
Housing length | 161.5 mm |
Weight | 0.2 kg |
Housing Diameter | 18 mm |
Eject Force | 395 N |
Stroke | 90 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 260 mm |
Height | 20 mm |
Width | 85.5 mm |
Function | Filter Set, cabin air |
Filter type | Pollen Filter |
Weight | 0.117 kg |
Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
External Thread Size | M10 x 1,25 |
Weight | 0.59 kg |
Cone Size | 16 mm |
Mounting points diameter | 10.5 mm |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with bolts/screws, with washers |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.25 kg |
Parameter | 3PK + 4PK |
Outer diameter | 155 mm. 131 mm |
Inner diameter | 20 mm |
Number of Ribs | 5 |
Thickness | 42.5 mm |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.005 kg |
Material | NBR (nitrile butadiene rubber) |
Outer diameter | 15 mm |
Thickness | 2.5 mm |
Inner diameter | 10 mm |
Function | Seal, fuel line |
Type | Seal, fuel line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.2 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 345 mm |
Thickness | 54.6 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 26.5 mm |
Bolt Hole Circle Diameter | 115 mm |
Centering Diameter | 72.6 mm |
Surface | Coated |
Machining | High-carbon |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.545 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 108 |
Timing Chain Size | G67HP, G67HR |
Function | Timing Chain |
Type | Timing Chain |
Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 12.2 mm |
Outer diameter | 45 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Thickness | 45 mm |
Weight | 0.236 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Triangular Control Arm (CV) |
Paired article numbers | 178644 |
Weight | 3.340 kg |
Cone Size | 17 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,25 |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.100 kg |
Hose Length | 375 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Function | Radiator Hose |
Cooling Hose | from expansion tank to waterpump |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.953 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 45009 |
Type | Tie Rod |
Function | Tie Rod |
Extra Description | ProKit |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023