Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 1 m |
| Function | Corrugated Pipe, exhaust system |
| Inner diameter | 103 mm |
| Weight | 2.70 kg |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Type | Hydraulic Filter Kit, automatic transmission |
| Transmission Type | CVT automatic transmission (stepless) |
| Function | Hydraulic Filter Kit, automatic transmission |
| Filter type | Screen Filter |
| Weight | 0.180 kg |
| Height | 58 mm |
| Length | 129 mm |
| Additional Information 2 | with oil sump gasket |
| Width | 110 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Length | 1139 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Weight | 0.109 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Weight | 0.177 kg |
| Inner diameter 2 | 84 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Length | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175500)
- 1x Febi Molybdenum Grease (02582)
£19.74
Important compatibility info
| Eject Force | 610 N |
| Stroke | 237 mm |
| Mounting points diameter | 17.8 mm |
| Housing length | 357 mm |
| Placement on Vehicle | both sides |
| Length | 637 mm |
| Housing Diameter | 19 mm |
| Weight | 0.379 kg |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Pump Type | Mono Pump |
| Weight | 0.098 kg |
| Number of Connectors / Ports | 3 |
| Type | Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Number of Ribs | 6 |
| Weight | 0.086 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1004 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Function | Mounting, engine |
| for OE number | 2 214 445 |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 0.460 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 25 mm |
| Outer diameter | 62 mm |
| Inner diameter | 30 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Weight | 0.35 kg |
| Type | Wheel Bearing |
| Bearing Code | 33206 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.921 kg |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (07359)
- 1x Febi Spacer Sleeve, suspension strut support mount (08431)
- 1x Febi Rubber Buffer, suspension (08384)
- 1x Febi Protective Cap/Bellow, shock absorber (02557)
£19.74
Important compatibility info
| Mounting points diameter | 18 mm |
| Housing length | 364.5 mm |
| Function | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Stroke | 303 mm |
| Eject Force | 230 N |
| Housing Diameter | 18 mm |
| Length | 685 mm |
| Placement on Vehicle | both sides |
| Weight | 0.394 kg |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.094 kg |
| Function | V-Ribbed Belt |
| Alternator type | for starter generator |
| Number of Ribs | 6 |
| Length | 994 mm |
| Tensile Cord Material | Aramid |
| Type | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 1.209 kg |
| Function | Cylinder Head Bolt Set |
| Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cylinder Head Bolt (02499)
- 3x Febi Cylinder Head Bolt (02322)
- 2x Febi Cylinder Head Bolt (02321)
£19.74
Important compatibility info
| Width | 170 mm |
| Material | Aluminium, Rubber/Metal |
| Outer diameter | 79 mm |
| Thickness | 51 mm |
| Paired article numbers | 27071 |
| Weight | 0.640 kg |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Inner diameter | 19 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Additional Information | with holder |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.159 kg |
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
| Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Right Front |
| Material | Plastic |
| Paired article numbers | 193068 |
| Colour | Black |
| Weight | 0.19 kg |
| Type | Door Check |
| Function | Door Check |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.38 kg |
| Placement on Vehicle | both sides |
| Length | 640 mm |
| Housing Diameter | 19 mm |
| Eject Force | 465 N |
| Stroke | 248 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 363.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from heat exchanger to engine |
| Function | Radiator Hose |
| Weight | 0.251 kg |
| Type | Radiator Hose |
| Additional Information | with quick coupling |
| Hose Length | 585 mm |
| Additional Information 2 | with clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.64 kg |
| Placement on Vehicle | Upper Left |
| Length | 785 mm |
| Housing Diameter | 22 mm |
| Eject Force | 250 N |
| Stroke | 350 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, front panel |
| Function | Gas Spring, front panel |
| Housing length | 415 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.635 kg |
| Width | 170 mm |
| Material | Aluminium |
| Outer diameter | 79 mm |
| Thickness | 50 mm |
| Paired article numbers | 27069 |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Additional Information | with holder |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.272 kg |
| Length | 2000 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.160 kg |
| Material | Plastic |
| Outer diameter | 75 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Length | 180 mm |
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Rear Axle Right, inner |
| Paired article numbers | 185682 |
| Weight | 0.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Length | 178 mm |
| Weight | 1.12 kg |
| Function | Cylinder Head Bolt Set |
| Type | Cylinder Head Bolt Set |
| Bolt Head/Nut Design | Female Star |
| Number of screws | 8 |
| Screw length below head | 166 mm |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 8x Febi Cylinder Head Bolt (26420)
£19.74
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| External Thread Size | M16 x 1,5 |
| Function | Ball Joint |
| Weight | 0.6 kg |
| Cone Size | 16.3 mm |
| Mounting points diameter | 13.5 mm |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Lower, Rear |
| Length | 100 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 0.45 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.178 kg |
| Outer diameter | 66 mm |
| Thickness | 101 mm |
| Inner diameter | 15 mm |
| Function | Urea Filter |
| Internal Thread Size | M15 x 3 |
| Type | Urea Filter |
| Additional Information | with gasket/seal, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | Left |
| Material | Plastic |
| Paired article numbers | 193076 |
| Colour | Black |
| Weight | 0.19 kg |
| Type | Door Check |
| Function | Door Check |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Weight | 0.52 kg |
| Mounting points diameter | 18 mm |
| Housing Diameter | 22 mm |
| Eject Force | 250 N |
| Stroke | 300 mm |
| Placement on Vehicle | Upper |
| Length | 685 mm |
| Function | Gas Spring, front panel |
| Housing length | 365 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, front panel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
Important compatibility info
| Placement on Vehicle | engine sided |
| Length | 1440 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 5 |
| Weight | 0.104 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.74
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023