Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Corrugated Pipe, exhaust system |
| Inner diameter | 90 mm |
| Length | 1 m |
| Weight | 2.45 kg |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Length | 904 mm |
| Function | Drive Arm, wiper linkage |
| Type | Drive Arm, wiper linkage |
| Weight | 0.610 kg |
| Hole Spacing | 835 mm. 870 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Weight | 1.08 kg |
| Cone Size | 19.6 mm |
| Mounting points diameter | 10.5 mm |
| Type | Ball Joint |
| Additional Information 2 | with washers, with bolts/screws |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.078 kg |
| Number of Ribs | 5 |
| Length | 628 mm |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Chemical Properties | Elastic |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Length | 1345 mm |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
| Tensile Cord Material | Aramid |
| Number of Ribs | 6 |
| Weight | 0.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Length | 180 mm |
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Rear Axle Right, inner |
| Paired article numbers | 185682 |
| Weight | 0.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Inner diameter 2 | 72 mm |
| Joint Type | Tripod Joint |
| Weight | 0.221 kg |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 26 mm |
| Material | NBR (nitrile butadiene rubber) |
| Length | 91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176426)
- 1x Febi Molybdenum Grease (02582)
£18.75
Important compatibility info
| Outer diameter | 175 mm |
| Thickness | 2.6 mm |
| Inner diameter | 136 mm |
| Function | Pressure Disc, leaf spring |
| Weight | 0.165 kg |
| Type | Pressure Disc, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Weight | 0.088 kg |
| Inner diameter 2 | 76 mm |
| Inner diameter 1 | 24 mm |
| Material | Thermoplastic polyester elastomer |
| Length | 113 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Joint Type | CV Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176121)
- 1x Febi Molybdenum Grease (02582)
£18.75
Important compatibility info
| Weight | 0.29 kg |
| Stroke | 256 mm |
| Housing Diameter | 18 mm |
| Eject Force | 370 N |
| Function | Gas Spring, front panel |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Housing length | 349 mm |
| Placement on Vehicle | Right Front |
| Length | 632 mm |
| Type | Gas Spring, front panel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Width | 83 mm |
| Length | 131 mm |
| Material | Rubber/Metal |
| Function | Rubber Buffer, suspension |
| Thickness | 126 mm |
| Weight | 1.193 kg |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 735 mm |
| Spanner Size | 11 |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Weight | 0.16 kg |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Thickness | 74 mm |
| Placement on Vehicle | Front Axle Right |
| Length | 217 mm |
| Spanner Size | 19 |
| Paired article numbers | 42237 |
| Function | Tie Rod End |
| Weight | 0.66 kg |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Length | 1102 mm |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Weight | 0.102 kg |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Alternator type | for starter generator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.257 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 129 mm |
| Material | Thermoplast |
| Inner diameter 1 | 31 mm |
| Inner diameter 2 | 103 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101863)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45646)
- 1x Febi High Temperature Lubricant (03630)
£18.75
Important compatibility info
| Width | 17 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Weight | 0.620 kg |
| Outer diameter | 63 mm |
| Inner diameter | 38 mm |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Wheel Bearing (173925)
£18.75
Important compatibility info
| Function | Gasket, timing case |
| Material | Steel, NBR (nitrile butadiene rubber) |
| Weight | 0.016 kg |
| Type | Gasket, timing case |
| Thickness | 0.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Weight | 0.66 kg |
| Length | 217 mm |
| Thickness | 74 mm |
| Spanner Size | 19 |
| Paired article numbers | 42235 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.070 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 113 mm |
| Material | Thermoplast |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 84 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101941)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Axle Bolt, drive shaft (40617)
£18.75
Important compatibility info
| Weight | 0.426 kg |
| Additional Information 2 | with oil sump gasket |
| Length | 242 mm |
| Height | 119 mm |
| Width | 192 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.21 kg |
| Placement on Vehicle | Front Axle |
| Length | 150 mm |
| Width | 126 mm |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (108924)
- 2x Febi Rubber Buffer, suspension (103966)
£18.74
Important compatibility info
| Weight | 0.09 kg |
| Placement on Vehicle | Rear Axle |
| Length | 115 mm |
| Width | 51 mm |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (103820)
- 2x Febi Protective Cap/Bellow, shock absorber (17149)
£18.73
Important compatibility info
| Internal Thread Size | M12 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Function | Tie Rod End |
| Paired article numbers | 43155 |
| Spanner Size | 19 |
| Thickness | 70 mm |
| Length | 184 mm |
| Placement on Vehicle | Front Axle Right |
| Weight | 0.61 kg |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.73
Important compatibility info
| Function | Cap, fuel tank |
| Material | Plastic |
| Lock System | with lock, with two keys |
| Weight | 0.151 kg |
| Extra Description | febi Plus |
| Type | Cap, fuel tank |
| Lockable | Lockable |
| Replaces | 14983 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.73
Important compatibility info
| Type | Bushing, axle beam |
| Weight | 0.569 kg |
| Inner diameter | 12.3 mm |
| Thickness | 85 mm |
| Outer diameter | 65.8 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.73
Important compatibility info
| Additional Information 2 | with seal ring |
| Weight | 0.087 kg |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Type | Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.73
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 40 mm |
| Inner diameter 2 | 22 mm |
| Outer diameter 1 | 68 mm |
| Width 1 | 20 mm |
| Outer diameter 2 | 45 mm |
| Width 2 | 17 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Weight | 0.51 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (24994)
- 1x Febi Wheel Bearing (06126)
- 1x Febi Wheel Bearing (05417)
£18.73
Important compatibility info
| Placement on Vehicle | Front, Rear Axle Left, Rear Axle Right |
| Weight | 0.400 kg |
| Thickness | 80 mm |
| Function | Bushing, axle beam |
| Material | Rubber/Metal |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.73
Important compatibility info
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Weight | 0.386 kg |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.73
Important compatibility info
| Weight | 0.090 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 650 mm |
| Paired article numbers | 109064 |
| Number of Connectors / Ports | 2 |
| Cable Length | 583 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.72
Important compatibility info
| Function | Gasket, cylinder head cover |
| Thickness | 5.3 mm |
| Material | ACM (Polyacrylate) |
| Weight | 0.042 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.72
Important compatibility info
| Weight | 0.550 kg |
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.72
Important compatibility info
| Outer diameter | 100 mm |
| Colour | Yellow |
| DIN / ISO | 74323 |
| Number of Coils | 20 |
| Working length | 4 m |
| Function | Spiral Hose |
| Material | PU (Polyurethane) |
| Weight | 1.0094 kg |
| External Thread Size | M22 x 1,5 |
| Type | Spiral Hose |
| Additional Information 2 | with adapter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.72
Important compatibility info
| Weight | 0.13 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1212 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.72
Important compatibility info
| Weight | 0.8 kg |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 205 mm |
| Thickness | 84 mm |
| Spanner Size | 22 |
| Paired article numbers | 42742 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.72
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Cable Length | 940 mm |
| Paired article numbers | 172087 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Weight | 0.081 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.72
Important compatibility info
| Weight | 0.8 kg |
| Function | Tie Rod End |
| Length | 183 mm |
| Placement on Vehicle | Front Axle Left |
| Thickness | 84 mm |
| Spanner Size | 22 |
| Paired article numbers | 42743 |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.72
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with counter nut |
| Weight | 0.33 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 80 mm |
| Spanner Size | 12 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.72
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 245 mm |
| Housing Diameter | 16 mm |
| Eject Force | 400 N |
| Stroke | 74 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, bonnet |
| Housing length | 137 mm |
| Type | Gas Spring, bonnet |
| Weight | 0.106 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Weight | 0.59 kg |
| Width | 26 mm |
| Outer diameter | 80 mm |
| Inner diameter | 45 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Bearing |
| Bearing Code | 33109 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Centre |
| Length | 75 mm |
| Material | Rubber/Metal |
| Outer diameter | 74.5 mm |
| Inner diameter | 13 mm |
| Function | Bushing, axle beam |
| Weight | 0.37 kg |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Function | Fuel filter |
| Pressure | 4 bar |
| Type | Fuel filter |
| Weight | 0.274 kg |
| Height | 176 mm |
| Outer diameter | 74 mm |
| Additional Information 2 | with pressure regulator |
| Filter type | In-Line Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 75 mm. 124 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 0.480 kg |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 44 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Weight | 0.050 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Weight | 0.330 kg |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 98 mm |
| Material | Thermoplast |
| Length | 117 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38561)
- 1x Febi Clamping Clip (38759)
- 1x Febi Clamping Clip (45646)
- 1x Febi Molybdenum Grease (02582)
£18.71
Important compatibility info
| Extra Description | febi Plus |
| Weight | 0.550 kg |
| Inner diameter | 160 mm |
| Material | Steel |
| Outer diameter | 179 mm |
| Placement on Vehicle | Front Axle |
| Number of Teeth, ABS ring | 100 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 420 mm |
| Housing Diameter | 19 mm |
| Eject Force | 600 N |
| Stroke | 151 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.260 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Weight | 0.240 kg |
| Placement on Vehicle | both sides |
| Length | 503 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing Diameter | 18 mm |
| Eject Force | 280 N |
| Stroke | 193 mm |
| Housing length | 280 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Function | Wheel Bolt |
| Wheel Fastening | Conical Seat F |
| Thread Length | 25 mm |
| Surface | Chromed |
| Spanner Size | 17, 19 |
| Length | 51 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Weight | 0.45 kg |
| Screw length below head | 25 mm |
| Outer diameter | 23.7 mm |
| Material | Steel |
| Quality/ Grade | 8.8 |
| Type | Wheel Bolt |
| Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Weight | 1.279 kg |
| Placement on Vehicle | Front Axle |
| Length | 118.8 mm |
| Width | 69.5 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.2 mm |
| Function | Brake Pad Set, disc brake |
| Replaces | 16046 |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023