Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 98 mm |
| Material | Thermoplast |
| Length | 117 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38561)
- 1x Febi Clamping Clip (38759)
- 1x Febi Clamping Clip (45646)
- 1x Febi Molybdenum Grease (02582)
£18.71
Important compatibility info
| Function | Gasket, oil sump |
| Length | 828 mm |
| Width | 363 mm |
| Thickness | 2 mm |
| Mounting points diameter | 12 mm |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Function | Ball Joint |
| Cone Size | 18 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Width | 26 mm |
| Outer diameter | 80 mm |
| Inner diameter | 45 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Bearing |
| Bearing Code | 33109 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | Rear Axle, Wheel Side |
| Length | 117 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 80 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101861)
- 1x Febi Clamping Clip (03597)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
£18.71
Important compatibility info
| Additional Information 2 | with quick couplers |
| Function | Radiator Hose |
| Hose Length | 95 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from heat exchanger to heater valve |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Width of castor bearing surface | 25.5 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Material | Plastic |
| Outer diameter | 62.5 mm |
| Number of Ribs | 6 |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 17 mm |
| Inner diameter | 8 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 53 mm |
| Function | Bushing, axle beam |
| for OE number | 51939761 |
| Type | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Number of Connectors / Ports | 2 |
| Pump Type | Dual Pump |
| Function | Washer Fluid Pump, window cleaning |
| Additional Information 2 | with seal ring |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 140.1 mm |
| Width | 41.7 mm. 43.8 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Sensor, wheel speed |
| Cable Length | 952 mm |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 107613 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 147 mm |
| Additional Information 2 | with nut |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Spanner Size | 17 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Width | 159 mm |
| Material | PU (Polyurethane) |
| Placement on Vehicle | Lower, Rear Axle |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Height | 88.7 mm |
| Outer diameter | 93 mm |
| Additional Information 2 | with seal ring |
| Tightening Torque | 35 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Connector Shape | D Shape |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Number of Poles | 2 -pin connector |
| Function | Expansion Tank, coolant |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Function | V-Ribbed Belt |
| Alternator type | for starter generator |
| Number of Ribs | 6 |
| Length | 994 mm |
| Tensile Cord Material | Aramid |
| Type | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Paired article numbers | 185683 |
| External Thread Size | M10 x 1 |
| Function | Brake Hose |
| Type | Brake Hose |
| Length | 180 mm |
| Placement on Vehicle | Rear Axle Left, inner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | Cylinder Head Cover |
| Height | 8.3 mm |
| Material | ACM (Polyacrylate) |
| Type | Gasket, crankcase ventilation |
| Function | Gasket, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | Front, Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Centre |
| Length | 75 mm |
| Material | Rubber/Metal |
| Outer diameter | 74.5 mm |
| Inner diameter | 13 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.71
Important compatibility info
| Width | 39 mm |
| Outer diameter | 74 mm |
| Inner diameter | 39 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with Split Pin, with retaining rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (04852)
- 1x Febi Split Pin (02877)
- 2x Febi Circlip (04853)
£18.70
Important compatibility info
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Voltage | 12 V |
| Type | Washer Fluid Pump, window cleaning |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.70
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Height | 177 mm |
| Outer diameter | 85 mm |
| Filter type | Spin-on Filter, with water drain screw |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Width | 13 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 175 mm |
| Inner diameter | 145 mm |
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | transmission sided |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Additional Information | with counter nut |
| Function | Inner Tie Rod |
| Length | 190 mm |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Stroke | 256 mm |
| Housing Diameter | 18 mm |
| Eject Force | 370 N |
| Function | Gas Spring, front panel |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Housing length | 349 mm |
| Placement on Vehicle | Right Front |
| Length | 632 mm |
| Type | Gas Spring, front panel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Length | 162 mm |
| Housing Diameter | 16 mm |
| Eject Force | 400 N |
| Stroke | 42 mm |
| Mounting points diameter | 8.3 mm |
| Piston conrod diameter | 6 mm |
| Housing length | 98 mm |
| Type | Gas Spring, air deflector / Gas Spring, boot/cargo area |
| Function | Gas Spring, air deflector / Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Type | Gas Spring, front panel |
| Stroke | 150 mm |
| Eject Force | 100 N |
| Housing length | 202 mm |
| Housing Diameter | 15 mm |
| Mounting points diameter | 13 mm |
| Spanner Size | 13 |
| External Thread Size | M8 x 1 |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, front panel |
| Length | 375 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Length | 665 mm |
| Material | Steel |
| Function | High-pressure Pipe, injection system |
| Internal Thread Size | M14 x 1,5 |
| Type | High-pressure Pipe, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 66 mm |
| Inner diameter 1 | 24 mm |
| Length | 95 mm |
| Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175386)
- 1x Febi Molybdenum Grease (02582)
£18.69
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 785 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 197324 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 197323 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.69
Important compatibility info
| Extra Description | febi Plus |
| Material | Plastic |
| Colour | Black |
| Function | Cap, fuel tank |
| Type | Cap, fuel tank |
| for OE number | 16 11 7 482 902 |
| Lockable | not lockable |
| Additional Information 2 | with support strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.68
Important compatibility info
| Function | Protection Lid, wheel hub |
| Type | Protection Lid, wheel hub |
| Inner diameter | 114 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 114 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 160 mm. 125 mm |
| Thickness | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.68
Important compatibility info
| Length | 187 mm |
| Type | Gasket, exhaust manifold |
| Function | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.68
Important compatibility info
| Number of Connectors / Ports | 1 |
| Type | Knock Sensor |
| Function | Knock Sensor |
| for OE number | 30530-PPL-A01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.68
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 111 mm |
| Width | 59 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.68
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Inner diameter 2 | 85 mm |
| Inner diameter 1 | 26 mm |
| Length | 121 mm |
| Material | Thermoplast |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176312)
- 1x Febi Molybdenum Grease (02582)
£18.68
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M14 x 2 |
| Cone Size | 17.4 mm |
| Mounting points diameter | 10.9 mm |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.67
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 115 mm |
| Width | 51 mm |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (103820)
- 2x Febi Protective Cap/Bellow, shock absorber (17149)
£18.67
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 687 mm |
| Paired article numbers | 175228 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.67
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.67
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | PU (Polyurethane) |
| Thickness | 115 mm |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.66
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 6 |
| Rated Power | 5 W |
| Function | Relay, wipe/wash interval |
| Type | Relay, wipe/wash interval |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.66
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 205 mm |
| Thickness | 84 mm |
| Spanner Size | 22 |
| Paired article numbers | 42742 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.66
Important compatibility info
| Function | Tie Rod End |
| Length | 183 mm |
| Placement on Vehicle | Front Axle Left |
| Thickness | 84 mm |
| Spanner Size | 22 |
| Paired article numbers | 42743 |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.66
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 338 mm |
| Outer diameter | 105 mm |
| Function | Suspension Spring |
| Wire Diameter | 10 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.66
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023