Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 23 mm |
| Function | Water Pump & Timing Belt Kit |
| Weight | 1.726 kg |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 148 |
| Surface | PTFE (Polytetrafluorethylene) coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (30586)
- 1x Febi Water Pump, engine cooling (24358)
£126.14
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 186220 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Cable Length | 521 mm |
| Weight | 0.075 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.96
Important compatibility info
| Weight | 1.9 kg |
| Placement on Vehicle | Front Axle |
| Length | 360 mm |
| Outer diameter | 142 mm |
| Function | Suspension Spring |
| Wire Diameter | 11.5 mm |
| Number of Coils | 5.5 |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.19
Important compatibility info
| Length | 83 mm |
| Material | Rubber |
| Inner diameter 1 | 21 mm |
| Inner diameter 2 | 80 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.071 kg |
| Additional Information | with grease |
| Additional Information 2 | with clamps |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (38330)
- 1x Febi Clamping Clip (38765)
- 1x Febi Clamping Clip (38757)
- 1x Febi High Temperature Lubricant (03630)
£10.23
Important compatibility info
| Function | Clamping Clip |
| Clamping range from | 13.5 mm |
| Clamping range to | 16 mm |
| Width | 7 mm |
| Material | Stainless Steel |
| Weight | 0.00257 kg |
| Type | Clamping Clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.46
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 380 mm |
| Rod/Strut | Coupling Rod |
| Cone Size | 28.6 mm |
| Pipe Diameter | 36 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 3.656 kg |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.81
Important compatibility info
| Weight | 0.25 kg |
| Length | 2490 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.11
Important compatibility info
| Weight | 0.401 kg |
| Length | 145 mm |
| Width | 49 mm. 13 mm |
| Thickness | 100 mm |
| Outer diameter | 55 mm |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (30927)
- 1x Febi Bearing, propshaft centre bearing (05362)
£54.10
Important compatibility info
| Paired article numbers | 40141 |
| Function | Tie Rod |
| Placement on Vehicle | Front Axle Left |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Additional Information | with lock nut |
| Weight | 1.282 kg |
| Extra Description | ProKit |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (31523)
- 1x Febi Tie Rod End (39955)
£27.05
Important compatibility info
| Weight | 1.03 kg |
| Placement on Vehicle | Rear |
| Number of Connectors / Ports | 3 |
| Function | Wiper Motor |
| Voltage | 12 V |
| External Thread Size | M8 x 1,25 |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.55
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.154 kg |
| Cable Length | 1300 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.32
Important compatibility info
| Length | 1556 mm |
| Placement on Vehicle | Left Rear, Right Rear |
| Type | Cable Pull, parking brake |
| Weight | 0.48 kg |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.73
Important compatibility info
| Type | Filter, cabin air |
| Length | 221 mm |
| Function | Filter, cabin air |
| Height | 43 mm |
| Width | 186 mm |
| Filter type | Pollen Filter |
| Weight | 0.16 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.99
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 614 mm |
| Weight | 0.2 kg |
| Housing Diameter | 21 mm |
| Housing length | 389 mm |
| Type | Gas Spring, boot/cargo area |
| Stroke | 193 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Eject Force | 560 N |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.48
Important compatibility info
| Function | Air Filter |
| Length | 259 mm |
| Height | 50 mm |
| Width | 179 mm |
| Filter type | Filter Insert |
| Weight | 0.34 kg |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.12
Important compatibility info
| Type | Stop- /Mounting Buffer |
| Thickness | 32 mm |
| Inner diameter | 13 mm |
| Weight | 0.011 kg |
| Function | Stop- /Mounting Buffer |
| Outer diameter | 40 mm |
| Extra Description | febi Plus |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.75
Important compatibility info
| Length | 254 mm |
| Height | 69 mm |
| Width | 213 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Weight | 0.33 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.63
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 0.55 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 320 mm |
| Material | Steel |
| Spanner Size | 19 |
| Paired article numbers | 42598 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.04
Important compatibility info
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | outer, Front Axle |
| Material | Rubber |
| Inner diameter | 16 mm |
| Weight | 0.02 kg |
| Length | 30 mm |
| Width | 30 mm |
| Type | Mounting, stabiliser bar |
| Thickness | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.81
Important compatibility info
| Function | Bellow Kit, steering |
| Inner diameter 2 | 63 mm |
| Length | 200 mm |
| Material | Thermoplast |
| Inner diameter 1 | 16 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
| Type | Bellow Kit, steering |
| Weight | 0.080 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (43549)
- 1x Febi Clamping Clip (38756)
- 1x Febi Clamping Clip (38764)
£11.80
Important compatibility info
| Weight | 9.32 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 43.9 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.70
Important compatibility info
| Additional Information | with belt tensioner for V-ribbed belt |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt Set |
| Length | 1075 mm |
| Additional Information 2 | with top |
| Number of Ribs | 6 |
| Weight | 1.003 kg |
| Type | V-Ribbed Belt Set |
| Units / Pulleys | incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28919)
- 1x Febi Belt Tensioner, v-ribbed belt (38465)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (14375)
£78.99
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 893 mm |
| Additional Information 2 | with crown nut |
| Internal Thread Size | M24 x 1,5 |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Diameter 1 | 56 mm |
| Rod/Strut | Push Rod |
| Weight | 13.250 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Weight | 0.11 kg |
| Hose Length | 250 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Radiator Hose |
| Cooling Hose | from throttle body to cylinder head |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.94
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Weight | 0.08 kg |
| Cable Length | 1865 mm |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 179123 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.44
Important compatibility info
| Height | 205 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Weight | 0.196 kg |
| Type | Oil Filter |
| Outer diameter | 121 mm |
| Additional Information 2 | with seal ring |
| Inner diameter | 58 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.14
Important compatibility info
| Surface | Zinc-coated |
| Thread Length | 10 mm |
| Screw length below head | 12 mm |
| Bolt Head/Nut Design | Hexagon Socket |
| Function | Screw Plug, oil sump |
| Outer diameter | 21 mm |
| External Thread Size | M14 x 1,25 |
| Length | 16 mm |
| Spanner Size | 8 |
| Material | Steel |
| Type | Screw Plug, oil sump |
| Weight | 0.027 kg |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw Plug, oil sump (45617)
- 1x Febi Seal Ring, oil drain plug (36495)
£5.81
Important compatibility info
| Outer diameter | 228 mm. 200 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Weight | 6.0 kg |
| Thickness | 175 mm. 525 mm |
| External Thread Size | M12 x 1,5, M8 x 1,25, M22 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£65.13
Important compatibility info
| Length | 77.5 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.025 kg |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.62
Important compatibility info
| Rims | for light alloy rims, for steel rims |
| Screw length below head | 25 mm |
| Outer diameter | 24.6 mm |
| Function | Wheel Bolt |
| Wheel Fastening | Ball seat A/G |
| Quality/ Grade | 10.9 |
| Bolt Head/Nut Design | Male Hex |
| Thread Length | 26 mm |
| Surface | Zink flake coated |
| Spanner Size | 17 |
| Material | Steel |
| Length | 49 mm |
| Placement on Vehicle | Rear Axle, Front Axle |
| Weight | 0.075 kg |
| External Thread Size | M14 x 1,5 |
| Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.72
Important compatibility info
| Weight | 1.84 kg |
| Placement on Vehicle | Front Axle |
| Length | 334 mm |
| Outer diameter | 157 mm |
| Function | Suspension Spring |
| Wire Diameter | 12.5 mm |
| Number of Coils | 4.4 |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 0.076 kg |
| Material | PU (Polyurethane) |
| Placement on Vehicle | Front Axle |
| Function | Rubber Buffer, suspension |
| Length | 85 mm |
| Width | 60 mm |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.89
Important compatibility info
| Filter type | Filter Insert |
| Function | Fuel filter |
| Weight | 0.179 kg |
| Height | 85 mm |
| Outer diameter | 102 mm |
| Additional Information | with gaskets/seals |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.84
Important compatibility info
| Type | Rubber Buffer, driver cab |
| Function | Rubber Buffer, driver cab |
| Weight | 0.086 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.41
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 35 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Hub |
| Weight | 1.377 kg |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.78
Important compatibility info
| Height | 83.5 mm |
| Outer diameter | 107 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 36 |
| Weight | 0.180 kg |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cover, fuel filter |
| Function | Cover, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.35
Important compatibility info
| Weight | 0.53 kg |
| Additional Information 2 | with clamps |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter | 58 mm |
| Type | Radiator Hose |
| Function | Radiator Hose |
| Extra Description | ProKit |
| Additional Information | with quick coupling |
| Hose Length | 530 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (45393)
- 1x Febi Hose Clamp (48355)
£30.53
Important compatibility info
| Weight | 0.02 kg |
| Number of Connectors / Ports | 3 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
| for OE number | 55209194 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.66
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 2.35 kg |
| Width | 36 mm |
| Function | Bearing / Wheel Bearing |
| Outer diameter | 155 mm |
| Sealing lip material | ACM (Polyacrylate) |
| Type | Bearing / Wheel Bearing |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Thickness | 51 mm |
| Outer diameter | 79 mm |
| Material | Aluminium, Rubber/Metal |
| Width | 71 mm |
| Length | 64 mm |
| Weight | 1.02 kg |
| Extra Description | ProKit |
| Type | Mounting, control/trailing arm |
| Additional Information 2 | with bolts/screws |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (30691)
- 2x Febi Screw (37613)
- 1x Febi Screw (39229)
£27.33
Important compatibility info
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 58 mm |
| Weight | 4.400 kg |
| Type | Wheel Bearing Kit |
| Outer diameter | 115 mm |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 57.8 mm |
| Width | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£145.27
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 174 mm |
| Diameter | 1 mm |
| Material | Plastic |
| Spanner Size | 15 |
| Paired article numbers | 192978 |
| Rod/Strut | Coupling Rod |
| Thread Length | 29 mm |
| Weight | 0.246 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.78
Important compatibility info
| Weight | 1.1 kg |
| Additional Information 2 | with gear |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.09
Important compatibility info
| Weight | 0.07 kg |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.10
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 180 mm. 130 mm. 100 mm |
| Thickness | 532 mm |
| Weight | 1.5 kg |
| Type | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.81
Important compatibility info
| Weight | 0.054 kg |
| Length | 115 mm |
| Material | Thermoplast |
| Inner diameter 2 | 74 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (12852)
- 1x Febi Clamping Clip (45642)
- 1x Febi Molybdenum Grease (02582)
£11.24
Important compatibility info
| Weight | 0.39 kg |
| Placement on Vehicle | Front Axle |
| Length | 39 mm |
| Width | 42 mm |
| Material | Rubber with fabric lining, Rubber |
| Outer diameter | 41.5 mm |
| Thickness | 41.5 mm |
| Inner diameter | 23.5 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.40
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Weight | 0.77 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.73
Important compatibility info
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.31 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.55
Important compatibility info
| Width | 63.5 mm |
| Outer diameter | 180 mm |
| Inner diameter | 75 mm |
| Bearing Type | Tapered Roller Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Bearing, manual transmission |
| Weight | 7.6 kg |
| Type | Bearing, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£170.02
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023