Important compatibility info
| Material | Aluminium |
| Function | Oil sump |
| Type | Oil sump |
| Additional Information 2 | with bore for oil-level sensor |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Function | Brake Disc |
| Centering Diameter | 63.5 mm |
| Minimum thickness | 23.0 mm |
| Number of Holes | 5 |
| Outer diameter | 315 mm |
| Height | 48 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 28 mm |
| Quantity | 1 |
| Rotor Style | Vented |
| Number of mounting bores | 1 |
Important compatibility info
| Rotor Style | Vented |
| Brake Disc Thickness | 30 mm |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Outer diameter | 330 mm |
| Height | 52 mm |
| Placement on Vehicle | Front Axle |
| Number of Holes | 5 |
| Minimum thickness | 28 mm |
| Centering Diameter | 69 mm |
| Number of mounting bores | 2 |
Important compatibility info
| Surface | Coated |
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Outer diameter | 326 mm |
| Brake Disc Thickness | 30 mm |
| Height | 53 mm |
| Number of Holes | 5 |
| Minimum thickness | 28 mm |
| Centering Diameter | 58 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 2 |
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Port / Connector type | 2 PIN |
| Type | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| Connector Shape | Rectangular |
Important compatibility info
| Type | Cable Pull, manual transmission |
| Length 1 | 743 mm |
| Length 2 | 1044 mm |
| Length 3 | 747 mm |
| Length 4 | 1076 mm |
| Function | Cable Pull, manual transmission |
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Replaced by | BBT213 |
Important compatibility info
| External Teeth, Wheel Side | 29 |
| Length | 639 mm |
| External Teeth, Diff.Side | 29 |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Number of Teeth, ABS ring | 48 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1444)
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
| Width | 42 mm |
| Quantity Unit | Set |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Width | 39 mm |
| Quantity Unit | Set |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Number of Parts | 2 -part |
| Hub Profile | 26 x 23 |
| Outer diameter | 240 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Number of Teeth | 23 |
| Type | Clutch Kit |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6342 |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| Length 2 | 965 mm |
| Length 3 | 1350 mm |
| Length 4 | 1010 mm |
| Length 1 | 1225 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7567 |
| Placement on Vehicle | Front Axle Right, Lower, Front |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6999)
Important compatibility info
| Placement on Vehicle | Front |
| Function | Wiper Motor |
| Type | Wiper Motor |
| Voltage | 12 V |
| Additional Information | with rod assembly |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1200 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 1 | 1400 mm |
| Type | Cable Pull, manual transmission |
Important compatibility info
| External Teeth, Diff.Side | 27 |
| Length | 497 mm |
| Seal Diameter | 30 mm |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 24 |
| Placement on Vehicle | Front Axle Right, transmission sided |
Important compatibility info
| Transmission Type | Manual Transmission |
| Length | 886 mm |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 26 |
| Placement on Vehicle | Front Axle Right |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 22 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1228)
Important compatibility info
| Length | 616 mm |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 29 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1511)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















