Proud to be a UK-based company
Contact us
Important compatibility info
| Opening Pressure | 1.15 bar |
| Function | Cap, coolant tank |
| Material | Plastic |
| Weight | 0.046 kg |
| Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.13
Important compatibility info
| Internal Thread Size | M22 x 1,5, M8 x 1,25 |
| Function | Directional Control Valve Block, air suspension |
| Type | Directional Control Valve Block, air suspension |
| Weight | 2.451 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£214.99
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.105 kg |
| for OE number | 6U0 906 265 B |
| Cable Length | 580 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.32
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 90 |
| Timing Chain Size | G44HCF |
| Function | Chain, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.2 kg |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.06
Important compatibility info
| Outer diameter | 80 mm |
| Length | 155 mm |
| Function | Joint Kit, drive shaft |
| Weight | 1.8 kg |
| Seal Diameter | 52 mm |
| Internal Teeth, wheel side | 28 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Number of Teeth, ABS ring | 29 |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 22 |
| External Thread Size | M20 x 1 |
£24.55
Important compatibility info
| Length | 60 mm |
| Material | Steel |
| Diameter | 65 mm |
| Thickness | 46 mm |
| Thread Length | 21 mm |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 17 |
| Rod/Strut | Coupling Rod |
| Weight | 0.22 kg |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Paired article numbers | 41205 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.51
Important compatibility info
| Paired article numbers | 176816 |
| Function | Cable Pull, parking brake |
| Weight | 0.80 kg |
| Type | Cable Pull, parking brake |
| Length | 1677 mm |
| Placement on Vehicle | Left Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.50
Important compatibility info
| Filter type | Filter Insert |
| Weight | 0.188 kg |
| Type | Air Filter |
| Length | 280 mm |
| Height | 34 mm |
| Width | 166 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.48
Important compatibility info
| Outer diameter | 50 mm |
| Length | 399 mm. 631 mm |
| Weight | 1.456 kg |
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber, steering |
| Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.14
Important compatibility info
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 215 mm |
| Weight | 0.3 kg |
| Length | 538 mm |
| Placement on Vehicle | both sides |
| Housing Diameter | 20 mm |
| Eject Force | 355 N |
| Housing length | 290 mm |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.02
Important compatibility info
| Function | Fuel filter |
| Housing material | Metal |
| Weight | 0.502 kg |
| Type | Fuel filter |
| Height | 134 mm |
| Material | Paper |
| Outer diameter | 94 mm |
| Inner diameter | 46 mm |
| Filter type | In-Line Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.37
Important compatibility info
| Weight | 1.31 kg |
| Material | Cast Aluminium |
| Function | Brake Master Cylinder |
| Inner diameter | 23.81 mm |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.50
Important compatibility info
| Width | 130 mm |
| Function | Mounting, radiator |
| Type | Mounting, radiator |
| Height | 76 mm |
| Extra Description | febi Plus |
| Placement on Vehicle | Left |
| Length | 146 mm |
| Weight | 0.275 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.99
Important compatibility info
| Weight | 0.024 kg |
| Material | Rubber |
| Thickness | 9 mm |
| Inner diameter | 7 mm |
| Outer diameter 1 | 20 mm |
| Outer diameter 2 | 12 mm |
| Function | Seal Ring, cylinder head cover bolt |
| Extra Description | febi Plus |
| Type | Seal Ring, cylinder head cover bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 10x Febi Seal Ring, cylinder head cover bolt (32144)
£6.97
Important compatibility info
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Spanner Size | 17 |
| Material | Steel |
| Length | 110 mm |
| Placement on Vehicle | Rear Axle Right |
| Weight | 0.24 kg |
| Paired article numbers | 42575, 42601 |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.84
Important compatibility info
| Weight | 0.056 kg |
| Function | Mounting, stabiliser bar |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.35
Important compatibility info
| Number of Ribs | 5 |
| Parameter | 6PK |
| Width | 85 mm |
| Outer diameter | 192 mm |
| Inner diameter | 32 mm |
| Function | Belt Pulley, crankshaft |
| Weight | 2.6 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Additional Information 2 | with screw, with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (29990)
- 1x Febi Washer, crankshaft pulley (33599)
- 1x Febi Centering Bolt, crankshaft pulley (33601)
£98.94
Important compatibility info
| Weight | 0.52 kg |
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 96 |
| Timing Chain Size | G68HR, G68AM |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.76
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 4.7 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 668 mm |
| Min. Length | 420 mm |
| Pipe Diameter | 75 mm. 64 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£181.65
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 335 mm |
| Thickness | 120 mm |
| Paired article numbers | 44669 |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Weight | 1.26 kg |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (44668)
- 1x Febi Nut (38356)
£37.46
Important compatibility info
| Number of clutch pressure plate fastening holes | 12 mm |
| Pitch circle diameter, clutch pressure plate | 375 mm |
| Number of hub fastening holes | 8 mm |
| Number of Teeth | 133 |
| Hub fastening hole diameter | 16 mm |
| External diameter, clutch pressure plate | 395 mm |
| Running surface internal diameter | 236 mm |
| Hub external diameter | 115 mm |
| Hub internal diameter | 52 mm |
| Number of EDC bores/notches | 58 |
| Pitch circle diameter, hub | 84 mm |
| Weight | 20.688 kg |
| Type | Flywheel |
| Function | Flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£343.44
Important compatibility info
| Weight | 0.35 kg |
| Hose Length | 520 mm |
| Placement on Vehicle | Upper |
| Outer diameter | 44 mm |
| Inner diameter | 36 mm |
| Function | Radiator Hose |
| Cooling Hose | from thermostat to radiator |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Weight | 0.084 kg |
| Placement on Vehicle | Front Axle Right, Front Axle Left, Rear Axle Left, Rear Axle Right |
| Length | 450 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1250 Ohm |
| Cable Length | 400 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.20
Important compatibility info
| Weight | 0.590 kg |
| Placement on Vehicle | Right Rear, Left Rear |
| Length | 1432 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.38
Important compatibility info
| Weight | 0.008 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.55
Important compatibility info
| Rims | for light alloy rims, for steel rims |
| Outer diameter | 27.9 mm |
| Material | Steel |
| Screw length below head | 33 mm |
| Function | Wheel Bolt |
| Wheel Fastening | Conical Seat F |
| Quality/ Grade | 10.9 |
| Bolt Head/Nut Design | Male Hex |
| Thread Length | 27 mm |
| Surface | Zink flake coated |
| Spanner Size | 19 |
| Length | 60 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Weight | 0.104 kg |
| External Thread Size | M14 x 1,5 |
| Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.88
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 120 mm |
| Outer diameter | 120 mm |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Weight | 2.0 kg |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.01
Important compatibility info
| Filter type | Filter Insert |
| Function | Air Filter |
| Length | 267 mm |
| Height | 40 mm |
| Width | 260 mm |
| Additional Information 2 | with pre-filter |
| Weight | 0.4 kg |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.19
Important compatibility info
| Shape/Form | Round |
| Weight | 0.05 kg |
| Placement on Vehicle | Rear Axle |
| Length | 178 mm |
| Inner diameter | 36 mm. 53 mm |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.98
Important compatibility info
| Width | 26 mm |
| Material | Metal |
| Outer diameter | 67.8 mm |
| Function | Tensioner Pulley, timing belt |
| Weight | 0.594 kg |
| Width of castor bearing surface | 26 mm |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.66
Important compatibility info
| Function | Rubber Buffer, suspension |
| Material | PU (Polyurethane) |
| Weight | 0.069 kg |
| Length | 78 mm |
| Width | 61 mm |
| Placement on Vehicle | Front Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.64
Important compatibility info
| Material | Steel |
| Weight | 0.030 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 86 mm |
| Thickness | 6.8 mm |
| Inner diameter | 70 mm |
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.07
Important compatibility info
| Outer diameter | 98 mm |
| Filter type | In-Line Filter |
| Pipe Diameter | 10 mm |
| Housing material | Metal |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 177 mm |
| Seal Material | FPM (fluoride rubber) |
| Weight | 0.33 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.43
Important compatibility info
| Weight | 0.383 kg |
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | 17 13 8 610 653 |
| Type | Expansion Tank, coolant |
| Additional Information | without coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Weight | 1.435 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 40 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| for OE number | 357 407 615 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.83
Important compatibility info
| Height | 93.5 mm |
| Outer diameter | 98 mm |
| Additional Information 2 | with seal ring |
| Weight | 0.160 kg |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.72
Important compatibility info
| Function | Mounting, control/trailing arm |
| Inner diameter | 16 mm |
| Outer diameter | 54 mm |
| Material | Rubber/Metal |
| Length | 77 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Weight | 0.63 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.01
Important compatibility info
| Weight | 0.7 kg |
| Outer diameter | 173 mm |
| Thickness | 54 mm |
| Inner diameter | 110 mm |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Additional Information 2 | without rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.75
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 190 |
| Timing Chain Size | G68HRF |
| Function | Timing Chain |
| Type | Timing Chain |
| Weight | 1.040 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Weight | 1.600 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 116 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G67HP |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (38185)
- 1x Febi Tensioner, timing chain (30511)
- 1x Febi Guide, timing chain (30465)
- 1x Febi Guide, timing chain (38184)
- 1x Febi Gear/Sprocket, camshaft (25469)
- 1x Febi Sprocket, crankshaft (25470)
£155.89
Important compatibility info
| Material | ACM (Polyacrylate) |
| Weight | 0.075 kg |
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.81
Important compatibility info
| Outer diameter | 255 mm |
| Placement on Vehicle | Rear Axle |
| Thickness | 37 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Weight | 3.0 kg |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2.2 kW |
| Weight | 3.7 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£96.81
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.7 kW |
| Type | Starter |
| Function | Starter |
| Weight | 3.59 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Additional Information | with drive rods |
| Weight | 0.610 kg |
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Pump (34722)
- 1x Febi Drive Shaft, oil pump (34785)
- 1x Febi Drive Shaft, oil pump (34786)
£96.13
Important compatibility info
| Placement on Vehicle | Rear Axle, Upper |
| Weight | 1.73 kg |
| Function | Spring Seat |
| Type | Spring Seat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.87
Important compatibility info
| Additional Information | with starter motor sprocket |
| for OE number | 51.02301.7434 |
| Weight | 22.750 kg |
| Number of Teeth | 129 |
| Function | Flywheel |
| Pitch circle diameter, hub | 85 mm |
| Hub internal diameter | 60 mm |
| Number of clutch pressure plate fastening holes | 9 mm |
| Hub external diameter | 120 mm |
| Running surface internal diameter | 190 mm |
| External diameter, clutch pressure plate | 371 mm |
| Hub fastening hole diameter | 15.0 mm |
| Pitch circle diameter, clutch pressure plate | 368 mm |
| Number of hub fastening holes | 8 mm |
| Type | Flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£227.20
Important compatibility info
| Additional Information 2 | with quick couplers |
| Hose Length | 380 mm |
| Weight | 0.165 kg |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | Radiator Hose |
| Placement on Vehicle | Lower Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Function | Tie Rod End |
| Length | 142 mm |
| Placement on Vehicle | Front Axle |
| Weight | 1.892 kg |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.34
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle Left |
| Length | 160 mm |
| Additional Information | with nuts |
| Thread Length | 27 mm |
| Rod/Strut | Coupling Rod |
| Paired article numbers | 183101 |
| Diameter | 1 mm |
| Material | Steel |
| Spanner Size | 19 |
| External Thread Size | M12 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 0.388 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023