Important compatibility info
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Inner diameter 2 | 84 mm |
| Inner diameter 1 | 26 mm |
| Material | Rubber |
| Length | 100 mm |
| Placement on Vehicle | Front Axle, transmission sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176022)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Inner diameter 2 | 73 mm |
| Material | Thermoplast |
| Inner diameter 1 | 25 mm |
| Function | Bellow Kit, drive shaft |
| Length | 100 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175982)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length | 1318 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 395 mm |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 181989 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle Left |
| Length | 390 mm |
| Paired article numbers | 181988 |
| Internal Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with nuts |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 185 mm |
| Diameter | 1 mm |
| Material | Steel |
| Thickness | 119 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Spanner Size | 15 |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 194119 |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 194118 |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Internal Thread Size | M16 x 1,5 |
| Length | 168 mm |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 248 mm |
| Function | Hydraulic Filter, automatic transmission |
| Width | 200 mm |
| Height | 45 mm |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Opening Temperature | 92 °C. 107 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Fuel filter |
| Function | Fuel filter |
| Internal Thread Size | M16 x 1,5 |
| Outer diameter | 85 mm |
| Height | 171 mm |
| Filter type | Spin-on Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 260 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Diameter | 1 mm |
| Material | Steel |
| Outer diameter | 10 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Thread Length | 26.5 mm |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 187 mm |
| Spanner Size | 18 |
| Function | Tie Rod End |
| Paired article numbers | 106866 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,75 |
| Extra Description | ProKit |
| Additional Information | with lock nut |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 99.6 mm |
| Width | 42.2 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 7 |
| Tensile Cord Material | Polyester |
| Type | V-Ribbed Belt |
| Length | 1570 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ball Joint |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 15 mm |
| Mounting points diameter | 12.45 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (11745)
- 2x Febi Clamping Bolt, ball joint (09451)
- 2x Febi Nut (09452)
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 92 mm |
| Function | Holder, engine mounting system |
| Placement on Vehicle | Front, Upper |
| Material | Rubber/Metal |
| Type | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Function | Cable Pull, parking brake |
| Length | 1175 mm |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















