Proud to be a UK-based company
Contact us
Important compatibility info
| Spanner Size | 27 |
| Control Type | Push Actuation |
| Length | 35 mm. 44 mm |
| Material | Brass |
| External Thread Size | M18 x 1,5, M27 x 1 |
| Weight | 0.095 kg |
| Type | Control Switch / Switch, 'driver cab tilted' display |
| Function | Control Switch / Switch, 'driver cab tilted' display |
| Replaces | 09963 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Length | 1526 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Weight | 0.180 kg |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Inner diameter 2 | 72 mm |
| Weight | 0.365 kg |
| Placement on Vehicle | transmission sided, Front Axle |
| Function | Bellow Kit, drive shaft |
| Material | Thermoplast |
| Length | 113 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (45641)
- 1x Febi Clamping Clip (38757)
- 1x Febi Bellow, drive shaft (36510)
- 1x Febi Molybdenum Grease (08414)
£17.76
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Weight | 0.092 kg |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 90 mm |
| Material | Thermoplastic polyester elastomer |
| Length | 97 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
£17.76
Important compatibility info
| Weight | 0.585 kg |
| Placement on Vehicle | Rear Axle, transmission sided |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 99 mm |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08478)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Nut, kingpin (01841)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (02596)
- 1x Febi Molybdenum Grease (02582)
£17.76
Important compatibility info
| Length | 1190 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Alternator type | for starter generator |
| Weight | 0.128 kg |
| Number of Ribs | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.060 kg |
| Cable Length | 785 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Length | 315 mm |
| Height | 55 mm |
| Width | 195 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Weight | 0.280 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.060 kg |
| Cable Length | 725 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 0.77 kg |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| Length | 186 mm |
| Material | Steel |
| Paired article numbers | 34310 |
| Surface | Phosphatized |
| Internal Thread Size | M15 x 1,5 |
| Extra Description | ProKit |
| Replaces | 43219 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.578 kg |
| Placement on Vehicle | both sides |
| Length | 95 mm |
| Material | Rubber/Metal |
| Outer diameter | 58 mm |
| Inner diameter | 16 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 0.61 kg |
| Additional Information 2 | with fastening material, with ball bearing |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| for OE number | 5031.77 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (19495)
- 1x Febi Spring Seat (37165)
- 1x Febi Nut (37805)
- 1x Febi Nut (37801)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
£17.76
Important compatibility info
| Weight | 0.495 kg |
| Length | 268 mm |
| Height | 58 mm |
| Width | 175 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information 2 | with oil sump gasket |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.080 kg |
| External Thread Size | M18 x 1,5 |
| Operating Mode | Mechanical |
| Spanner Size | 27 |
| Number of Connectors / Ports | 2 |
| Type | Pressure Switch / Pressure Switch, axle load control |
| Function | Pressure Switch / Pressure Switch, axle load control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Tensile Cord Material | Aramid |
| Length | 918 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Weight | 0.097 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Housing length | 378.5 mm |
| Mounting points diameter | 16.5 mm |
| Weight | 0.321 kg |
| Placement on Vehicle | both sides |
| Length | 715 mm |
| Eject Force | 160 N |
| Stroke | 318 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Length | 1196 mm |
| Type | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Alternator type | for starter generator |
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Weight | 0.126 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Material | Plastic |
| Outer diameter | 135 mm |
| Inner diameter | 30 mm |
| Weight | 0.210 kg |
| Thickness | 18 mm |
| Function | Belt Pulley, power steering pump |
| Extra Description | febi Plus |
| Type | Belt Pulley, power steering pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Additional Information | with grease |
| Additional Information 2 | with bolts/screws, with clamps |
| Placement on Vehicle | Rear Axle, transmission sided |
| Material | Rubber |
| Inner diameter 1 | 25 mm |
| Inner diameter 2 | 63 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.59 kg |
| Type | Bellow Kit, drive shaft |
| Length | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (02596)
- 1x Febi Molybdenum Grease (02582)
£17.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 984 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Weight | 0.05 kg |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Weight | 0.61 kg |
| Paired article numbers | 36875 |
| Function | Ball Joint |
| Cone Size | 20 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | for control arm |
| Mounting points diameter | 17.4 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.226 kg |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (186114)
- 2x Febi Protective Cap/Bellow, shock absorber (01367)
£17.76
Important compatibility info
| Weight | 0.060 kg |
| Length | 115 mm |
| Width | 166 mm |
| Thickness | 2 mm |
| Inner diameter | 63 mm |
| Function | Gasket, charge air cooler |
| Type | Gasket, charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Length | 1735 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Weight | 0.211 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.610 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 36877 |
| Function | Ball Joint |
| Steering arm type | for control arm |
| Cone Size | 20 mm |
| Mounting points diameter | 17.4 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| External Thread Size | M12 x 1,5 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Bore Diameter | 23.81 mm |
| Fill Medium | Brake Fluid |
| Weight | 0.054 kg |
| Function | Repair Kit, clutch master cylinder |
| Type | Repair Kit, clutch master cylinder |
| for OE number | 000 290 46 67 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Length | 640 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
| Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Weight | 0.073 kg |
| Inner diameter 2 | 88 mm |
| Inner diameter 1 | 28 mm |
| Material | Thermoplastic polyester elastomer |
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176083)
- 1x Febi Molybdenum Grease (02582)
£17.76
Important compatibility info
| Weight | 0.22 kg |
| Placement on Vehicle | Front Axle, Lower |
| Outer diameter | 110 mm |
| Inner diameter | 72 mm |
| Function | Spring Seat |
| Type | Spring Seat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.305 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 12.9 mm |
| Mounting points diameter | 10.5 mm |
| External Thread Size | M12 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.07 kg |
| Placement on Vehicle | Left Front |
| Paired article numbers | 101989 |
| Function | Lock Cylinder |
| Type | Lock Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 2.15 kg |
| Inner diameter | 80 mm |
| Length | 1 m |
| Function | Corrugated Pipe, exhaust system |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.670 kg |
| Placement on Vehicle | Front Axle |
| Length | 70 mm |
| Width | 70 mm |
| Material | Rubber/Metal |
| Outer diameter | 75 mm |
| Thickness | 75 mm |
| Inner diameter | 20 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.76
Important compatibility info
| Weight | 0.063 kg |
| Height | 40 mm |
| Width | 80 mm |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 10 mm |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| for OE number | 06J 103 213 B |
| Hose Length | 300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Number of Connectors / Ports | 4 |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
| Weight | 0.03 kg |
| Function | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Weight | 0.43 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 114 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 88 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08025)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Spacer Sleeve (03385)
- 1x Febi High Temperature Lubricant (03630)
£17.75
Important compatibility info
| Weight | 0.840 kg |
| Function | Bushing, leaf spring |
| Material | Rubber/Metal |
| Length | 75 mm |
| Inner diameter | 6.5 mm |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.8 mm |
| Inspection Tag | ECE R90 Approved |
| Width | 53.1 mm |
| Length | 94.8 mm |
| Placement on Vehicle | Front Axle |
| Weight | 1.102 kg |
| Type | Brake Pad Set, disc brake |
| Replaces | 16253 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Weight | 0.125 kg |
| Length | 1405 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.74
Important compatibility info
| Weight | 0.407 kg |
| Piston Diameter | 19.1 mm |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.73
Important compatibility info
| Additional Information | with axle nut |
| Function | Wheel Bearing Kit |
| Inner diameter | 39 mm |
| Outer diameter | 74 mm |
| Width | 39 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Weight | 0.79 kg |
| Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (04015)
- 1x Febi Nut, kingpin (22953)
£17.73
Important compatibility info
| Length | 279 mm |
| Outer diameter | 81 mm |
| Pipe Diameter | 10 mm. 8 mm |
| Function | Fuel filter |
| Filter type | In-Line Filter, without connection for water sensor, without water drain screw |
| Weight | 0.45 kg |
| Type | Fuel filter |
| Replaces | 103010 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.73
Important compatibility info
| Weight | 0.075 kg |
| Type | Valve, crankcase ventilation |
| Function | Valve, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Eject Force | 580 N |
| Placement on Vehicle | both sides |
| Length | 403 mm |
| Housing length | 224.5 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Stroke | 153 mm |
| Housing Diameter | 19 mm |
| Weight | 0.248 kg |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Thickness | 12 mm. 16 mm |
| Inner diameter | 85 mm |
| Material | FPM (fluoride rubber) |
| Outer diameter | 110 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Function | Shaft Seal, differential |
| Weight | 0.080 kg |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.315 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.323 kg |
| Mounting points diameter | 18 mm |
| Housing length | 270 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Stroke | 146 mm |
| Eject Force | 660 N |
| Housing Diameter | 19 mm |
| Length | 499 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Function | Hydraulic Filter Kit, automatic transmission |
| Length | 235 mm |
| Height | 49 mm |
| Width | 156 mm |
| Additional Information 2 | with oil sump gasket |
| Weight | 0.452 kg |
| Type | Hydraulic Filter Kit, automatic transmission |
| Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1480 mm |
| Function | Cable Pull, parking brake |
| Weight | 0.470 kg |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.72
Important compatibility info
| Weight | 0.063 kg |
| Placement on Vehicle | Front Axle |
| Length | 90 mm |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (26179)
- 2x Febi Protective Cap/Bellow, shock absorber (32125)
£17.72
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023