Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 298 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Diameter | 1 mm |
| Spanner Size | 16 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hole Spacing | 40 mm |
| Length | 114 mm |
| Width | 91 mm |
| Material | Rubber/Metal |
| Mounting points diameter | 11.5 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 200 mm |
| Inner diameter | 147 mm |
| Number of Teeth, ABS ring | 80 |
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Height | 41 mm |
| Width | 288 mm |
| Length | 356 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Material | Rubber/Metal |
| Outer diameter | 80 mm |
| Thickness | 60 mm |
| Function | Mounting, stabiliser bar |
| Inner diameter | 20 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Black |
| Type | Exterior Door Handle |
| Function | Exterior Door Handle |
| Extra Description | febi Plus |
| Material | Plastic |
| Placement on Vehicle | Vehicle Back Door, Left, Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Width | 68 mm |
| Material | PU (Polyurethane) |
| Length | 24 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 96 mm |
| Thickness | 91 mm |
| Inner diameter | 18 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Spanner Size | 21 |
| Type | Pressure Switch, air conditioning |
| Function | Pressure Switch, air conditioning |
| External Thread Size | 3/8 " 24 UNF |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Function | Mounting, control/trailing arm |
| Thickness | 71 mm |
| Material | Rubber/Metal |
| Inner diameter | 36.9 mm |
| Outer diameter | 53 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 23 mm |
| Material | Plastic |
| Outer diameter | 65 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 231 mm |
| Thickness | 86 mm |
| Spanner Size | 19 |
| Paired article numbers | 42482 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 231 mm |
| Thickness | 86 mm |
| Spanner Size | 19 |
| Paired article numbers | 42481 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 31 60 7 529 203 SK |
| Joint Type | CV Joint |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 122 mm |
| Material | Thermoplast |
| Inner diameter 2 | 83 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29247)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (27100)
- 3x Febi Molybdenum Grease (02582)
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from expansion tank to distributor and cylinder head |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
| Hose Length | 560 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Length | 82 mm |
| Width | 61 mm |
| Material | Rubber/Metal |
| Outer diameter | 61 mm |
| Thickness | 82 mm |
| Inner diameter | 17 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 139 mm |
| Width | 60 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Not Required |
| Thickness/Strength 1 | 15.9 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Set, steering gear |
| Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Blue |
| Number of Connectors / Ports | 4 |
| Function | Temperature Switch, radiator fan |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Number of Connectors / Ports | 2 |
| Cable Length | 710 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Paired article numbers | 175911 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 97 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 60 mm |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (179728)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Inner diameter | 75 mm |
| Function | Air Filter |
| Filter type | Filter Insert |
| Type | Air Filter |
| Outer diameter | 124 mm |
| Height | 320 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Outer diameter | 80 mm |
| Inner diameter | 42 mm |
| Additional Information | with axle nut |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
| Type | Wheel Bearing Kit |
| Width | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 90 mm |
| Material | Rubber/Metal |
| Outer diameter | 69 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Bush Set, axle beam |
| Type | Bush Set, axle beam |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (19928)
- 2x Febi Nut (14392)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 41 mm |
| Inner diameter 2 | 25 mm |
| Outer diameter 1 | 73.5 mm |
| Width 1 | 19.5 mm |
| Outer diameter 2 | 52 mm |
| Width 2 | 22 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
| for OE number | 604 330 00 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (08163)
- 1x Febi Wheel Bearing (08152)
- 1x Febi Washer (23623)
- 1x Febi Shaft Seal, wheel bearing (23621)
Important compatibility info
| Function | Mounting, stabiliser bar |
| Inner diameter | 49.5 mm |
| Material | Rubber/Metal |
| Length | 95 mm |
| Placement on Vehicle | Rear Axle Upper, inner |
| Outer diameter | 78 mm. 91 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Rear |
| Length | 1116 mm |
| Paired article numbers | 29579 |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 20.7 mm |
| Mounting points diameter | 10.8 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
| Placement on Vehicle | Front Axle |
| Length | 210 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Inner diameter 2 | 73 mm |
| Material | Thermoplast |
| Inner diameter 1 | 25 mm |
| Function | Bellow Kit, drive shaft |
| Length | 100 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175982)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Length | 1318 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 395 mm |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 181989 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | Rear Axle Left |
| Length | 390 mm |
| Paired article numbers | 181988 |
| Internal Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 194119 |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 194118 |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Internal Thread Size | M16 x 1,5 |
| Length | 168 mm |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Ball Joint |
| Additional Information | with crown nut and split pin |
| External Thread Size | M14 x 2 |
| Function | Ball Joint |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Fuel filter |
| Function | Fuel filter |
| Internal Thread Size | M16 x 1,5 |
| Outer diameter | 85 mm |
| Height | 171 mm |
| Filter type | Spin-on Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Length | 640 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 99.6 mm |
| Width | 42.2 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.2 mm |
| Wear Warning Contact | with acoustic wear warning |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 7 |
| Tensile Cord Material | Polyester |
| Type | V-Ribbed Belt |
| Length | 1570 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 187 mm |
| Spanner Size | 18 |
| Paired article numbers | 106867 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,75 |
| Additional Information | with lock nut |
| Extra Description | ProKit |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 187 mm |
| Spanner Size | 18 |
| Function | Tie Rod End |
| Paired article numbers | 106866 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,75 |
| Extra Description | ProKit |
| Additional Information | with lock nut |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ball Joint |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 15 mm |
| Mounting points diameter | 12.45 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (11745)
- 2x Febi Clamping Bolt, ball joint (09451)
- 2x Febi Nut (09452)
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 92 mm |
| Function | Holder, engine mounting system |
| Placement on Vehicle | Front, Upper |
| Material | Rubber/Metal |
| Type | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 269 mm |
| Outer diameter | 55 mm |
| Filter type | In-Line Filter |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Function | Cable Pull, parking brake |
| Length | 1175 mm |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































