Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 6 |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1645 mm |
| Width | 62 mm |
| Cone Size | 30 mm |
| Extra Description | ProKit |
| Type | Tie Rod |
| Function | Tie Rod |
| Pipe Diameter | 48 mm |
| Rod/Strut | Guide Rod |
| Thickness | 115 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Length | 666 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 14 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 125 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Type | Alternator |
| Alternator Charge Current | 150 A |
| Pulleys | with belt pulley |
| Function | Alternator |
| Belt Pulley Diameter | 54 mm |
| for OE number | 5705.GC |
| Voltage | 12 V |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Operating Mode | Manual |
| Number of Connectors / Ports | 3 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Length | 108 mm |
| Height | 78 mm |
| Width | 117 mm |
| Type | Housing, fuel filter |
| Function | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Number of Ribs | 6 |
| Function | V-Ribbed Belt Set |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Length | 1199 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (184943)
- 1x Febi Belt Tensioner, v-ribbed belt (180827)
£137.35
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
| for OE number | 1 708 322 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Width | 60 mm |
| Outer diameter | 172 mm |
| Inner diameter | 40 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.32
Important compatibility info
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Paired article numbers | 178916 |
| Additional Information 2 | without screw |
| Placement on Vehicle | Exhaust Side |
| Number of Teeth | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.20
Important compatibility info
| Number of Teeth | 36 |
| Placement on Vehicle | Intake Side |
| Additional Information 2 | without screw |
| Paired article numbers | 177847 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.20
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye |
| Max. Length | 748 mm |
| Min. Length | 473 mm |
| Pipe Diameter | 73.1 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 21 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.01
Important compatibility info
| Additional Information 2 | with valves |
| Additional Information | with gaskets/seals |
| Type | Bearing Bracket, camshaft |
| Function | Bearing Bracket, camshaft |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bearing Bracket, camshaft (171970)
- 1x Febi Control Valve, camshaft adjustment (40201)
- 1x Febi Central Magnet, camshaft adjustment (40198)
- 1x Febi Gasket, timing case cover (171570)
- 1x Febi Gasket, timing case cover (170573)
£136.98
Important compatibility info
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.97
Important compatibility info
| Height | 100 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Function | Throttle body |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.87
Important compatibility info
| Additional Information 2 | with lid |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.85
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197338 |
| Number of Connectors / Ports | 2. 5 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.69
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 644 mm |
| Min. Length | 384 mm |
| Pipe Diameter | 65 mm. 76 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.59
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 49 mm |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.54
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Housing material | Grey Cast Iron |
| Seal Material | Rubber |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 65 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.41
Important compatibility info
| Width | 58 mm |
| Outer diameter | 160 mm |
| Inner diameter | 75 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Bearing / Wheel Bearing |
| Function | Bearing / Wheel Bearing |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Pulleys | with belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
| Function | Alternator |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 19 mm |
| Placement on Vehicle | Rear Axle |
| Pipe Diameter | 48 mm |
| Length | 531 mm |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with bolts/screws |
| Additional Information | with clamping elements |
| Units / Pulleys | incl. deflection pulley |
| Length 1 | 1342 mm |
| Length 2 | 1526 mm |
| Number of ribs 2 | 8 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (34350)
- 1x Febi V-Ribbed Belt (40707)
- 2x Febi Belt Tensioner, v-ribbed belt (106501)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (38983)
£136.36
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 174328 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 182228 |
| Cone Size 2 | 22 mm |
| Cone Size 1 | 19 mm |
| Cone Size | 22 mm |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Number of Chain Links | 142 |
| Function | Timing Chain |
| Chain Type | Simplex, Closed chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023