Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 70 mm |
| Wheel Sided Joint Diameter | 80.5 mm |
| Min. Length | 819 mm |
| External Teeth, Diff.Side | 26 |
| Thread Size | M24 x 1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 6.474 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£115.53
Important compatibility info
| Weight | 0.51 kg |
| Type | Sealing Set, air compressor |
| Function | Sealing Set, air compressor |
| for OE number | 471 130 42 15 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£118.54
Important compatibility info
| Weight | 0.058 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1084 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.34
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 348 mm |
| Outer diameter | 169 mm |
| Weight | 2.4 kg |
| Number of Coils | 4.7 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 13.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.41
Important compatibility info
| Opening Temperature | 87 °C |
| Weight | 0.24 kg |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.46
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.062 kg |
| Number of Connectors / Ports | 2 |
| Cable Length | 932 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.164 kg |
| Inner diameter 1 | 30 mm |
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Inner diameter 2 | 75 mm |
| Material | Thermoplastic polyester elastomer |
| Length | 103 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (179804)
- 1x Febi Molybdenum Grease (02582)
£14.47
Important compatibility info
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Placement on Vehicle | Rear Axle Right |
| Weight | 0.280 kg |
| Paired article numbers | 185863 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.71
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Weight | 6.140 kg |
| Paired article numbers | 34358 |
| DIN / ISO | 5480 |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Length | 534 mm |
| Outer diameter | 98 mm |
| Number of Teeth | 26 |
| Screw length below head | 486 mm |
| Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Weight | 0.17 kg |
| Length | 356 mm |
| Type | Coolant Control Valve |
| Function | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.36
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Additional Information 2 | without screw |
| Number of Teeth | 36 |
| Weight | 0.785 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£116.83
Important compatibility info
| Length | 291 mm |
| Material | Metal |
| Paired article numbers | 27199 |
| Rod/Strut | Coupling Rod |
| Weight | 0.240 kg |
| Placement on Vehicle | Front Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.73
Important compatibility info
| Weight | 0.28 kg |
| Length | 31.5 mm |
| Outer diameter | 14.25 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.35
Important compatibility info
| Weight | 0.049 kg |
| Placement on Vehicle | Left Exterior Mirror |
| Length | 58 mm |
| Height | 64 mm |
| Width | 90 mm |
| Paired article numbers | 107878 |
| Type | Auxiliary Direction Indicator |
| Function | Auxiliary Direction Indicator |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Weight | 0.4 kg |
| Type | Gasket, cylinder head |
| Thickness | 1.2 mm |
| Bore Diameter | 89 mm |
| Function | Gasket, cylinder head |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.25
Important compatibility info
| Weight | 6.6 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 46.4 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.65
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 178130 |
| Weight | 3.445 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.63
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179445 |
| Weight | 2.034 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.13
Important compatibility info
| Weight | 0.399 kg |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.58
Important compatibility info
| Min. Length | 581 mm |
| External Teeth, Diff.Side | 35 |
| External Teeth, Wheel Side | 27 |
| Weight | 6.298 kg |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 81.5 mm |
| Type | Drive Shaft |
| Paired article numbers | 181114 |
| Placement on Vehicle | Front Axle Right |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£67.01
Important compatibility info
| Weight | 0.025 kg |
| Outer diameter | 31 mm |
| Thickness | 4.05 mm |
| Function | Adjusting Disc, valve clearance |
| Type | Adjusting Disc, valve clearance |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.88
Important compatibility info
| Weight | 0.02 kg |
| Material | Steel |
| Outer diameter | 20 mm |
| Thickness | 3.5 mm |
| Function | Seal, injector holder |
| Type | Seal, injector holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.39
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 6.24 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 286 mm |
| Thickness | 51.6 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.65
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 51 mm |
| Outer diameter | 89 mm |
| Inner diameter | 28 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Weight | 4.710 kg |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| Weight | 0.050 kg |
| Number of Connectors / Ports | 2 |
| Cable Length | 450 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£59.92
Important compatibility info
| Lambda Sensor | Heated, Regulating Sensor |
| Number of circuits | 4 |
| External Thread Size | M18 x 1,5 |
| Cable Length | 330 mm |
| Placement on Vehicle | Right Front |
| Spanner Size | 22 |
| Weight | 0.087 kg |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.22
Important compatibility info
| Joint Type | Tripod Joint |
| Inner diameter 2 | 100 mm |
| Inner diameter 1 | 28 mm |
| Weight | 0.267 kg |
| Length | 119 mm |
| Material | Thermoplastic polyester elastomer |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180501)
- 1x Febi Molybdenum Grease (02582)
£22.99
Important compatibility info
| Placement on Vehicle | Right |
| Length | 427 mm |
| Width | 244 mm |
| Thickness | 123 mm |
| Weight | 0.724 kg |
| Type | Cover, exterior mirror |
| Function | Cover, exterior mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.73
Important compatibility info
| Material | PU (Polyurethane) |
| Weight | 0.05 kg |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12541)
- 2x Febi Protective Cap/Bellow, shock absorber (12482)
£23.00
Important compatibility info
| Width | 196 mm |
| Length | 336 mm |
| Height | 35 mm |
| Filter type | Filter Insert |
| Weight | 0.22 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.58
Important compatibility info
| Weight | 0.76 kg |
| Placement on Vehicle | Rear Axle |
| Length | 94.8 mm |
| Width | 42.9 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.13
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle, Front |
| Function | Bush Set, axle beam |
| Thickness | 30 mm |
| Outer diameter | 55 mm |
| Weight | 0.15 kg |
| Type | Bush Set, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (12008)
£8.34
Important compatibility info
| Weight | 0.4 kg |
| Material | Plastic |
| Outer diameter | 70 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information | with holder |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.07
Important compatibility info
| Weight | 0.264 kg |
| Width of castor bearing surface | 26 mm |
| Material | Metal |
| Outer diameter | 76 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Weight | 3.150 kg |
| Type | Release Fork, clutch |
| Additional Information 2 | with bolts/screws |
| Additional Information | with bush, with fastening/mounting material |
| Function | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Weight | 0.171 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.26
Important compatibility info
| Internal Thread Size | M8 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.287 kg |
| Material | Rubber |
| Inner diameter | 18.5 mm |
| Function | Mounting Kit, stabiliser bar |
| Inner diameter 1 | 18.5 mm |
| Type | Mounting Kit, stabiliser bar |
| Inner diameter 2 | 27.5 mm |
| for OE number | 124 320 01 47 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (08943)
- 2x Febi Mounting, stabiliser bar (08944)
- 8x Febi Nut (08565)
- 8x Febi Washer (08567)
£9.07
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Weight | 0.100 kg |
| Length | 161 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Diameter | 1 mm |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.15
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 305 mm |
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,25, M14 x 1,5 |
| Type | Inner Tie Rod |
| Weight | 0.59 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.67
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Steel |
| Paired article numbers | 19071 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.260 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.37
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Weight | 0.25 kg |
| Material | Steel |
| Placement on Vehicle | Rear Axle Right |
| Length | 72 mm |
| Paired article numbers | 24954 |
| Rod/Strut | Coupling Rod |
| Additional Information | with nuts |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.64
Important compatibility info
| Weight | 0.936 kg |
| Placement on Vehicle | Rear Axle |
| Function | Bush Set, axle beam |
| Outer diameter | 60 mm |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (22699)
- 4x Febi Screw (32624)
£17.04
Important compatibility info
| Material | Sheet Steel |
| Inner diameter | 12 mm. 14 mm |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Weight | 0.85 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.04
Important compatibility info
| Weight | 2.93 kg |
| Placement on Vehicle | Front Axle Right, Rear |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 36328 |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 14 mm |
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (34175)
- 1x Febi Mounting, control/trailing arm (34176)
- 1x Febi Nut (36331)
£72.07
Important compatibility info
| Weight | 1.025 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with fastening/mounting material |
| Width | 38 mm |
| Outer diameter | 80 mm |
| Inner diameter | 43 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.22
Important compatibility info
| Weight | 0.17 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 83 mm |
| Inner diameter 1 | 25 mm |
| Material | Rubber |
| Length | 82 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22090)
- 1x Febi Molybdenum Grease (02582)
£12.12
Important compatibility info
| Weight | 3.8 kg |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£140.32
Important compatibility info
| Weight | 2.033 kg |
| Outer diameter | 139 mm. 143 mm |
| Thickness | 44.5 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 8 |
| Parameter | 4PK + 5PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 11.10 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 347 mm |
| Thickness | 59.5 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.57
Important compatibility info
| Weight | 0.630 kg |
| Width | 34 mm |
| Material | Metal |
| Outer diameter | 69 mm |
| Inner diameter | 10.3 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.00
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023