Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Hydraulic |
| Function | Tensioner, timing chain |
| Length | 60 mm |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Rear Axle |
| Length | 85.3 mm |
| Width | 46.5 mm |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 14 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ball Joint |
| Type | Ball Joint |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Steering arm type | for control arm |
| Additional Information 2 | with washers, with bolts/screws |
| Cone Size | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Outer diameter | 74 mm |
| Thickness | 51 mm |
| Inner diameter | 15 mm |
| Type | Mounting, differential |
| Function | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 106 mm |
| Material | Thermoplast |
| Inner diameter 1 | 40 mm |
| Inner diameter 2 | 90 mm |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175654)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Filter type | Screen Filter |
| Height | 31 mm |
| Length | 161 mm |
| Width | 152 mm |
| Additional Information 2 | with oil sump gasket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Stop- /Mounting Buffer |
| Type | Stop- /Mounting Buffer |
| Hole Spacing | 105 mm |
| Length | 300 mm |
| Width | 25 mm |
| Thickness | 56 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 51.2 mm |
| Wear Warning Contact | excl. wear warning contact |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.2 mm |
| Function | Brake Pad Set, disc brake |
| Length | 94.8 mm |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 453 mm |
| Housing Diameter | 19 mm |
| Eject Force | 550 N |
| Stroke | 173 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 253.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 19 mm |
| Function | Bushing, leaf spring |
| Thickness | 52 mm |
| Material | Rubber/Metal |
| Outer diameter | 52 mm |
| Width | 52 mm |
| Length | 97 mm |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Joint Type | Tripod Joint |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 102 mm |
| Material | Thermoplast |
| Inner diameter 1 | 24 mm |
| Inner diameter 2 | 68 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173235)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Lower |
| Inner diameter | 31 mm |
| Cooling Hose | from distributor to engine cooler |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Steel |
| Outer diameter | 185 mm |
| Inner diameter | 150 mm |
| Number of Teeth, ABS ring | 90 |
| Type | Sensor Ring, ABS |
| Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Accessory Kit, brake shoes |
| Type | Accessory Kit, brake shoes |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 374 mm |
| Housing Diameter | 18 mm |
| Eject Force | 350 N |
| Stroke | 140 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 206 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Height | 56 mm |
| Outer diameter | 80 mm |
| Inner diameter | 10 mm |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (36351)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Rod/Strut | Pull Rod |
| Extra Description | ProKit |
| Function | Rod/Strut, wheel suspension |
| Additional Information | with fastening/mounting material |
| Type | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (17265)
- 1x Febi Washer (08375)
- 1x Febi Screw (17277)
- 1x Febi Screw (17274)
- 2x Febi Nut (21055)
- 1x Febi Washer (17278)
Important compatibility info
| Placement on Vehicle | Rear Axle, transmission sided |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 99 mm |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08478)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Nut, kingpin (01841)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Packing Plate, drive shaft flange (02593)
- 1x Febi Circlip (02596)
- 1x Febi Molybdenum Grease (02582)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















