Important compatibility info
Weight | 0.380 kg |
External Thread Size | M12 x 1,25 |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Cone Size | 14.2 mm |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Replaces | 15500 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.294 kg |
Placement on Vehicle | both sides |
Length | 490 mm |
Housing Diameter | 19 mm |
Eject Force | 530 N |
Stroke | 189 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 273 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.6 kg |
Function | Radiator Hose |
Type | Radiator Hose |
Inner diameter | 56 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Outer diameter | 61 mm |
Hose Length | 310 mm |
Wall Thickness | 5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Valve stem diameter | 10 mm |
Valve head diameter | 49 mm |
Weight | 0.179 kg |
Notches / Holes Number | 1 |
Type | Intake Valve |
Function | Intake Valve |
Length | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Outer diameter | 54.8 mm |
Opening Temperature | 83 °C |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.132 kg |
Housing length | 197.5 mm |
Piston conrod diameter | 6 mm |
Stroke | 136 mm |
Housing Diameter | 15 mm |
Length | 356 mm |
Placement on Vehicle | both sides |
Function | Gas Spring, boot/cargo area |
Eject Force | 290 N |
Mounting points diameter | 16.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 40 mm |
Thickness | 43 mm |
Weight | 0.516 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Inner diameter | 19 mm |
Function | Repair Kit, stabiliser bush |
Width | 47 mm |
Material | Rubber/Metal |
Type | Repair Kit, stabiliser bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (32625)
- 2x Febi Bracket, stabiliser mounting (23604)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
Important compatibility info
Cooling Hose | from radiator to water pipe |
Weight | 0.21 kg |
Function | Radiator Hose |
Additional Information | with quick coupling |
Type | Radiator Hose |
for OE number | 8D0 121 101 K |
Placement on Vehicle | Upper Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 88 mm |
Material | Rubber |
Inner diameter 1 | 19 mm |
Inner diameter 2 | 64 mm |
Function | Bellow Kit, drive shaft |
Weight | 0.093 kg |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101961)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Length | 110 mm |
Material | Thermoplast |
Inner diameter 1 | 27 mm |
Function | Bellow Kit, drive shaft |
Weight | 1.00 kg |
Inner diameter 2 | 76 mm |
Placement on Vehicle | Wheel Side, Front Axle |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (36520)
- 1x Febi Clamping Clip (45642)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (08414)
Important compatibility info
Function | Coolant Flange |
Weight | 0.220 kg |
Type | Coolant Flange |
Additional Information | with gasket/seal |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Coolant Flange (24062)
- 2x Febi Screw (23592)
Important compatibility info
Weight | 1.02 kg |
Placement on Vehicle | Rear Axle |
Length | 107.6 mm |
Width | 45.6 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.3 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.190 kg |
Joint Type | CV Joint |
Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
Length | 113 mm |
Material | Thermoplast |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 97 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 15.7 mm |
Inspection Tag | ECE R90 Approved |
Brake System | Akebono |
Length | 127 mm |
Width | 48.2 mm |
Placement on Vehicle | Front Axle |
Weight | 1.290 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1544 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Weight | 0.147 kg |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.771 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 141 mm |
Material | Rubber/Metal |
Outer diameter | 49 mm |
Inner diameter | 19 mm |
Type | Bushing, leaf spring |
Function | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane), Rubber |
Weight | 0.51 kg |
Placement on Vehicle | Rear Axle |
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12499)
- 2x Febi Protective Cap/Bellow, shock absorber (12500)
Important compatibility info
Function | Splash Guard, brake disc |
Weight | 0.280 kg |
Type | Splash Guard, brake disc |
Extra Description | febi Plus |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 185927 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Hose, crankcase ventilation |
Material | Plastic |
Weight | 0.108 kg |
Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.702 kg |
Placement on Vehicle | Rear Axle |
Length | 95.7 mm |
Width | 41.5 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.3 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Replaces | 16440 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023