Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 125 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Weight | 0.392 kg |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 31 mm |
| Inner diameter 2 | 104 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100421)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45647)
- 2x Febi High Temperature Lubricant (03630)
£16.29
Important compatibility info
| Gasket inner diameter | 81 mm |
| Filter type | Main Stream Filtration, Filter Insert |
| Weight | 0.179 kg |
| Height | 82 mm |
| Additional Information 2 | with seal ring |
| Outer diameter | 83 mm |
| Inner diameter | 21 mm |
| Function | Fuel filter |
| Gasket outer diameter | 88.2 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.28
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 17 mm |
| Outer diameter | 59 mm. 45 mm |
| Inner diameter | 32 mm. 19 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Weight | 0.55 kg |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (04941)
- 1x Febi Screw (04946)
- 1x Febi Cap, wheel bearing (04947)
- 1x Febi Tab Washer, axle nut (08952)
£16.28
Important compatibility info
| Weight | 0.292 kg |
| Outer diameter | 80 mm |
| Function | Cap, fuel tank |
| Type | Cap, fuel tank |
| Lock System | without lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.27
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Front Axle Right |
| Length | 188 mm |
| Spanner Size | 18 |
| Paired article numbers | 48108 |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Weight | 0.924 kg |
| Type | Tie Rod End |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.27
Important compatibility info
| Type | Filter, operating hydraulics |
| Outer diameter | 76 mm |
| Height | 139.5 mm |
| Internal Thread Size | 3/4" - 16 UNF |
| Gasket outer diameter | 71.7 mm |
| Function | Filter, operating hydraulics |
| Gasket inner diameter | 62.3 mm |
| Weight | 0.55 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.27
Important compatibility info
| Cone Size | 17.8 mm |
| Weight | 0.79 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M16 x 1,5 |
| Mounting points diameter | 11 mm |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.27
Important compatibility info
| Paired article numbers | 184154 |
| Weight | 0.572 kg |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 94 mm |
| Spanner Size | 23 |
| Additional Information | with nuts |
| Internal Thread Size | M16 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.27
Important compatibility info
| Spanner Size | 27 |
| Control Type | Push Actuation |
| Length | 35 mm. 44 mm |
| Material | Brass |
| External Thread Size | M18 x 1,5, M27 x 1 |
| Weight | 0.095 kg |
| Type | Control Switch / Switch, 'driver cab tilted' display |
| Function | Control Switch / Switch, 'driver cab tilted' display |
| Replaces | 09963 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.27
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 94 mm |
| Spanner Size | 23 |
| Paired article numbers | 184153 |
| Weight | 0.572 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with lock nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.27
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023