Proud to be a UK-based company
Contact us
Important compatibility info
| Height | 145 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Outer diameter | 84 mm |
| Additional Information | with fastening/mounting material |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
Important compatibility info
| for OE number | 31303937 |
| Type | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | Steel, NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
Important compatibility info
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Right |
| Length | 135 mm |
| Spanner Size | 22 |
| Paired article numbers | 180972 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.46
Important compatibility info
| Length | 75 mm |
| Height | 53 mm |
| Width | 75 mm |
| Filter type | Filter Insert, Pre-Filter, with water separator |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.45
Important compatibility info
| Length | 88 mm |
| Material | Rubber |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 64 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101961)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
£16.45
Important compatibility info
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.45
Important compatibility info
| Filter type | Filter Insert |
| Additional Information 2 | with seal ring |
| Type | Oil Filter |
| Gasket inner diameter | 128 mm |
| Inner diameter | 52 mm |
| Function | Oil Filter |
| Height | 147 mm |
| Gasket outer diameter | 137 mm |
| Outer diameter | 120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.45
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Rod/Strut | Coupling Rod |
| Length | 124 mm |
| Material | Steel |
| Spanner Size | 17 |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.45
Important compatibility info
| Placement on Vehicle | Lower |
| Outer diameter | 91 mm |
| Thickness | 36 mm |
| Inner diameter | 15 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.44
Important compatibility info
| Outer diameter | 65 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 10 mm |
| Material | Plastic |
| Width | 30 mm |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.44
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 114 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 88 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08025)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Spacer Sleeve (03385)
- 1x Febi High Temperature Lubricant (03630)
£16.44
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Length | 1700 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.44
Important compatibility info
| Additional Information | with nuts |
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Rear Axle Left |
| Length | 313 mm |
| Material | Steel |
| Inner diameter | 8 mm |
| Paired article numbers | 29697 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.43
Important compatibility info
| Number of Connectors / Ports | 7 |
| Function | Ignition Switch |
| Extra Description | febi Plus |
| Type | Ignition Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.43
Important compatibility info
| Height | 381 mm |
| Outer diameter | 112 mm |
| Inner diameter | 99 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.43
Important compatibility info
| Gasket inner diameter | 81 mm |
| Filter type | Main Stream Filtration, Filter Insert |
| Height | 82 mm |
| Additional Information 2 | with seal ring |
| Outer diameter | 83 mm |
| Inner diameter | 21 mm |
| Function | Fuel filter |
| Gasket outer diameter | 88.2 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.43
Important compatibility info
| Function | Mounting, control/trailing arm |
| Inner diameter | 19 mm. 10 mm |
| Thickness | 48 mm |
| Outer diameter | 65 mm |
| Material | Rubber/Metal |
| Width | 31 mm |
| Length | 157 mm |
| Placement on Vehicle | Front Axle, Rear |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| Spanner Size | 27 |
| Control Type | Push Actuation |
| Length | 35 mm. 44 mm |
| Material | Brass |
| External Thread Size | M18 x 1,5, M27 x 1 |
| Type | Control Switch / Switch, 'driver cab tilted' display |
| Function | Control Switch / Switch, 'driver cab tilted' display |
| Replaces | 09963 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| Outer diameter | 80 mm |
| Function | Cap, fuel tank |
| Additional Information | with chain |
| Type | Cap, fuel tank |
| Lock System | without lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| Internal Thread Size | M18 x 1,5 |
| External Thread Size | M14 x 2 |
| Function | Tie Rod End |
| Paired article numbers | 38866 |
| Length | 112 mm |
| Placement on Vehicle | Front Axle Left |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| Extra Description | ProKit |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Spanner Size | 17 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 74 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| Length | 429 mm |
| Height | 36 mm |
| Width | 157 mm |
| Filter type | Filter Insert, Activated Carbon Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 36.8 mm |
| Material | Plastic |
| Outer diameter | 140 mm |
| Inner diameter 1 | 74 mm |
| Inner diameter 2 | 81 mm |
| Outer diameter 1 | 127 mm |
| Outer diameter 2 | 88 mm |
| Type | Rolling Bearing, suspension strut support mount |
| Function | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| External Thread Size | M14 x 2 |
| Internal Thread Size | M18 x 1,5 |
| Additional Information | with lock nut |
| Function | Tie Rod End |
| Paired article numbers | 38865 |
| Length | 112 mm |
| Placement on Vehicle | Front Axle Right |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.42
Important compatibility info
| Height | 300 mm |
| Placement on Vehicle | both sides |
| Width | 300 mm |
| Type | Mudflap |
| Function | Mudflap |
| Replaces | 03086 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.41
Important compatibility info
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Front Axle, Wheel Side |
| Inner diameter 2 | 92 mm |
| Length | 129 mm |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (49876)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
£16.41
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | both sides |
| Length | 215 mm |
| Width | 92.45 mm |
| Outer diameter | 20.2 mm |
| Type | Spring Clamp |
| Function | Spring Clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.40
Important compatibility info
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
| Function | Series resistor, electric motor (radiator fan) |
| Type | Series resistor, electric motor (radiator fan) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.40
Important compatibility info
| Length | 107 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 72 mm |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Manufacturer Restriction | Delphi |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (196344)
- 1x Febi Molybdenum Grease (02582)
£16.40
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 241 mm |
| Eject Force | 700 N |
| Stroke | 76 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 146.5 mm |
| Housing Diameter | 19 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.39
Important compatibility info
| Material | Rubber/Metal |
| Internal Thread Size | M8 x 1,25 |
| Placement on Vehicle | Front Axle |
| Inner diameter | 13 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.39
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 254 mm |
| Paired article numbers | 41948 |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.39
Important compatibility info
| Additional Information | with counter nut |
| Function | Inner Tie Rod |
| Length | 174 mm |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.39
Important compatibility info
| Thread Length | 11.6 mm |
| Placement on Vehicle | Front Axle Right |
| Length | 424 mm |
| Paired article numbers | 172718 |
| Function | Brake Hose |
| Internal Thread Size | M12 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.39
Important compatibility info
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
| Thread Length | 8 mm |
| Paired article numbers | 172686 |
| Spanner Size | 11 |
| Length | 198 mm |
| Placement on Vehicle | Outer, Rear Axle Left |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.39
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (44993)
- 1x Febi Rolling Bearing, suspension strut support mount (01111)
£16.39
Important compatibility info
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 185863 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.39
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 339 mm |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.39
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | FPM (fluoride rubber) |
| Outer diameter | 160.3 mm |
| Thickness | 10 mm |
| Inner diameter | 130.2 mm |
| Function | Shaft Seal, wheel hub |
| Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.39
Important compatibility info
| Placement on Vehicle | frontal sided |
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 140 mm |
| Thickness | 12 mm |
| Inner diameter | 115 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with mounting sleeve |
| Replaces | 29824 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.38
Important compatibility info
| Height | 158 mm |
| Outer diameter | 65 mm |
| Filter type | Filter Insert |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.38
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 4 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.38
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 1070 mm |
| Number of Connectors / Ports | 2 |
| Cable Length | 1014 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.38
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M12 x 1,5 |
| Cone Size | 15.4 mm |
| Mounting points diameter | 10 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.37
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Cone Size | 19 mm |
| Additional Information | with lock nut |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.37
Important compatibility info
| Material | PU (Polyurethane) |
| Placement on Vehicle | Front Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (14047)
- 2x Febi Protective Cap/Bellow, shock absorber (12493)
£16.37
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 120 mm |
| Thickness | 78 mm |
| Spanner Size | 19 |
| Paired article numbers | 38948 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.37
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 120 mm |
| Thickness | 78 mm |
| Spanner Size | 19 |
| Paired article numbers | 38947 |
| Function | Tie Rod End |
| Internal Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.37
Important compatibility info
| for OE number | 1 425 193 |
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.37
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023