Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.070 kg |
| Function | Gasket Set, steering gear |
| Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Weight | 0.13 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Function | Wheel Brake Cylinder |
| Material | Aluminium |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.210 kg |
| Piston Diameter | 20.6 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.2 kg |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 128 mm |
| Material | Thermoplast |
| Inner diameter 1 | 23 mm |
| Inner diameter 2 | 85 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Material | Plastic |
| Weight | 0.024 kg |
| Opening Pressure | 1.08 bar |
| Type | Cap, coolant tank |
| Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.525 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (10874)
- 1x Febi Suspension Strut Support Mount (10873)
- 1x Febi Nut (10893)
£16.04
Important compatibility info
| Weight | 0.624 kg |
| Placement on Vehicle | Left Rear |
| Length | 1670 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Paired article numbers | 18116 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with bush |
| Number of Connectors / Ports | 2 |
| Weight | 0.07 kg |
| Cable Length | 435 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.292 kg |
| Length | 125 mm |
| Material | Thermoplast |
| Inner diameter 2 | 90 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (29200)
- 1x Febi Clamping Clip (45644)
- 2x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Weight | 0.540 kg |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.125 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Brake Hose |
| Length | 469 mm |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
| External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.418 kg |
| Length | 75 mm |
| Outer diameter | 24 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 116 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 81 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Weight | 0.209 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (48806)
- 1x Febi Clamping Clip (03597)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
£16.04
Important compatibility info
| Weight | 0.25 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 184 mm |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22018)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Weight | 1.2 kg |
| Length | 377 mm |
| Function | Brake Hose |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.35 kg |
| Placement on Vehicle | both sides |
| Length | 508 mm |
| Housing Diameter | 18 mm |
| Eject Force | 620 N |
| Stroke | 180 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 297.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Length | 1358 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 9 |
| Function | V-Ribbed Belt |
| Weight | 0.2 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.31 kg |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Length | 240 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 41197 |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Weight | 0.452 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.050 kg |
| Notches / Holes Number | 1 |
| Function | Exhaust Valve |
| Valve head diameter | 29.9 mm |
| Length | 106.7 mm |
| Valve stem diameter | 6 mm |
| Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Inner diameter | 45 mm |
| Function | Gasket Set, intake manifold |
| Weight | 0.007 kg |
| Type | Gasket Set, intake manifold |
| Material | FKM (fluorocarbon rubber) |
| Width | 1.7 mm |
| Height | 5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.294 kg |
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 140 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 88 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100039)
- 1x Febi Clamping Clip (29200)
- 1x Febi Clamping Clip (45644)
- 2x Febi Molybdenum Grease (02582)
£16.04
Important compatibility info
| Weight | 0.816 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 02672 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 1.370 kg |
| Placement on Vehicle | Front Axle |
| Length | 124.1 mm |
| Width | 57.2 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.060 kg |
| Length | 100 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 78 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (102061)
- 1x Febi Clamping Clip (27100)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
£16.04
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 145 mm |
| Material | Steel |
| Paired article numbers | 32603 |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 9 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 0.29 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Length | 107 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 71 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.259 kg |
| Type | Bellow Kit, drive shaft |
| Placement on Vehicle | transmission sided, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100400)
- 1x Febi Clamping Clip (29816)
- 1x Febi Clamping Clip (45644)
- 1x Febi High Temperature Lubricant (03630)
£16.04
Important compatibility info
| Material | Plastic |
| Outer diameter | 95 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.062 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.04
Important compatibility info
| Weight | 0.15 kg |
| Function | V-Ribbed Belt |
| Number of Ribs | 5 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1745 mm |
| DIN / ISO | 7867 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.03
Important compatibility info
| Weight | 0.05 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 856 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 775 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.03
Important compatibility info
| Outer diameter | 80 mm |
| Inner diameter | 17 mm |
| Weight | 0.13 kg |
| Mounting points diameter | 17 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.03
Important compatibility info
| Material | Steel |
| Paired article numbers | 15541 |
| Internal Thread Size | M14 x 1,5 |
| Length | 180 mm |
| Placement on Vehicle | Front Axle Right |
| Weight | 0.400 kg |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.03
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Inner Tie Rod |
| Weight | 0.628 kg |
| Function | Inner Tie Rod |
| Length | 278 mm |
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Spanner Size | 30 |
| Outer diameter | 36 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.03
Important compatibility info
| Weight | 0.302 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 102.7 mm |
| Inner diameter | 72.4 mm |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.03
Important compatibility info
| Weight | 0.300 kg |
| Placement on Vehicle | Rear Axle, transmission sided, Wheel Side |
| Length | 57 mm. 69 mm |
| Material | Rubber |
| Inner diameter 1 | 38 mm. 45 mm |
| Inner diameter 2 | 69 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (03346)
- 1x Febi Clamping Clip (38762)
- 2x Febi Clamping Clip (38764)
- 1x Febi Bellow Kit, drive shaft (36687)
- 1x Febi High Temperature Lubricant (03630)
£16.03
Important compatibility info
| Placement on Vehicle | Front |
| Weight | 0.093 kg |
| Material | MVQ (silicone rubber), Rubber/Metal |
| Function | Mount, exhaust system |
| Type | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.02
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 40 mm. 70 mm |
| Thickness | 28 mm. 76 mm |
| Inner diameter | 34 mm |
| Function | Bushing, axle beam |
| Weight | 0.450 kg |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.02
Important compatibility info
| Filter type | Filter Insert |
| Type | Air Filter |
| Outer diameter | 70 mm |
| Inner diameter | 62 mm |
| Weight | 0.216 kg |
| Function | Air Filter |
| Height | 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.02
Important compatibility info
| Weight | 0.158 kg |
| Length | 1548 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.02
Important compatibility info
| Weight | 1.408 kg |
| External Thread Size | M14 x 1,5 |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| Length | 235 mm |
| Spanner Size | 21 |
| Paired article numbers | 103679 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with screw |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.02
Important compatibility info
| Weight | 0.176 kg |
| Material | Thermoplast |
| Placement on Vehicle | Wheel Side, Front Axle Left |
| Length | 88 mm |
| Inner diameter 1 | 28 mm |
| Paired article numbers | 175146 |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 86 mm |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174811)
- 1x Febi Molybdenum Grease (02582)
£16.02
Important compatibility info
| Weight | 0.533 kg |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 288 mm |
| Diameter | 1 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.02
Important compatibility info
| Function | Mounting, stabiliser bar |
| Inner diameter | 25 mm |
| Placement on Vehicle | inner, Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.02
Important compatibility info
| Length | 114 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle |
| Weight | 0.548 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (11022)
- 1x Febi Link/Coupling Rod, stabiliser bar (11023)
- 2x Febi Bolt, control arm (11154)
£16.01
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.430 kg |
| External Thread Size | M10 x 1,5 |
| Length | 90 mm |
| Width | 60 mm |
| Material | Rubber/Metal |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.01
Important compatibility info
| Type | Air Filter |
| Weight | 0.255 kg |
| Length | 330 mm |
| Outer diameter | 105 mm |
| Inner diameter | 54 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.01
Important compatibility info
| Weight | 0.085 kg |
| Length | 831 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Additional Information 2 | Requires special tools for mounting |
| Chemical Properties | Elastic |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.01
Important compatibility info
| Function | Warning Contact, brake pad wear |
| Weight | 0.06 kg |
| Placement on Vehicle | Front Axle |
| Length | 1385 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.01
Important compatibility info
| Function | Air Filter |
| Length | 313 mm |
| Additional Information 2 | with pre-filter |
| Weight | 0.32 kg |
| Filter type | Filter Insert |
| Height | 47 mm |
| Width | 273 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.01
Important compatibility info
| Extra Description | febi Plus |
| Cable Length | 320 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.014 kg |
| Type | Cable Repair Set, auxiliary water pump |
| Function | Cable Repair Set, auxiliary water pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.01
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023