Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with counter nut |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 226 mm |
| Function | Inner Tie Rod |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Outer diameter | 46 mm |
| Opening Temperature | 91 °C |
| Function | Thermostat, coolant |
| Seal Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 7 mm |
| Material | FPM (fluoride rubber) |
| Outer diameter | 85 mm |
| Inner diameter | 70 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Material | Rubber |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 74 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Length | 95 mm |
| Placement on Vehicle | transmission sided, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45636)
- 1x Febi High Temperature Lubricant (03630)
£15.74
Important compatibility info
| Length | 100 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 78 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (102061)
- 1x Febi Clamping Clip (27100)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
£15.74
Important compatibility info
| Inner diameter | 150 mm |
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Material | Steel |
| Outer diameter | 180 mm |
| Placement on Vehicle | Rear Axle |
| Height | 19.5 mm |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 116 mm |
| Paired article numbers | 104872 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
| External Thread Size | M14 x 2 |
| Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Length | 237 mm |
| Extra Description | ProKit |
| Additional Information | with counter nut |
| Type | Inner Tie Rod |
| Replaces | 178519 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Function | Repair Kit, brake caliper |
| Type | Repair Kit, brake caliper |
| for OE number | 50 01 860 792 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Length | 274 mm |
| Pipe Diameter | 9 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 274 mm |
| Width | 55 mm |
| Outer diameter | 55 mm |
| Filter type | In-Line Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Width | 52.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Length | 131.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Height | 88 mm |
| Outer diameter | 76 mm |
| Additional Information 2 | with seal ring |
| Bolt Head/Nut Design | External Hexagon |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Paired article numbers | 183509 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Length | 128 mm |
| External Thread Size | M12 x 1,75 |
| Spanner Size | 21 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Width | 204 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Height | 44 mm |
| Length | 307 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 209 mm |
| Outer diameter | 40 mm |
| Additional Information 2 | with nut |
| Spanner Size | 36 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Additional Information | with locking plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
| Outer diameter | 16 mm |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.74
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| External Thread Size | M10 x 1 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.73
Important compatibility info
| Spanner Size | 17 |
| Paired article numbers | 102299 |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M10 x 1,25 |
| Length | 225 mm |
| Type | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.73
Important compatibility info
| Placement on Vehicle | both sides |
| Piston conrod diameter | 10 mm |
| Eject Force | 850 N |
| Stroke | 67 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, bonnet |
| Housing length | 149 mm |
| Housing Diameter | 22 mm |
| Length | 234 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.73
Important compatibility info
| Paired article numbers | 14426 |
| External Thread Size | M10 x 1 |
| Function | Ball Joint |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (04936)
- 1x Febi Securing Plate, ball joint (14252)
- 3x Febi Clamping Bolt, ball joint (07866)
£15.72
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023