Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 570 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.54
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Paired article numbers | 182075 |
| Placement on Vehicle | Front Axle Right, Lower |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Triangular Control Arm (CV) |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 19 mm |
| External Thread Size | M14 x 1,5 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.47
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 354 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.41
Important compatibility info
| Vehicle Equipment | for vehicles with start-stop function |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1012 mm |
| Inner length 2 | 1087 mm |
| Outer length 1 | 1332 mm |
| Outer length 2 | 1455 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.35
Important compatibility info
| Stabiliser Diameter | 18 mm |
| for OE number | 204 326 06 65 S1 |
| Additional Information 2 | with coupling rod |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Placement on Vehicle | Rear Axle |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171139)
- 1x Febi Link/Coupling Rod, stabiliser bar (29695)
- 1x Febi Link/Coupling Rod, stabiliser bar (29694)
- 2x Febi Nut (06859)
- 2x Febi Nut, stabiliser bar (44514)
£138.34
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Placement on Vehicle | Outer |
| Length | 1376 mm |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 52 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Manufacturer | Aspöck |
| Placement on Vehicle | Left |
| Height | 148 mm |
| Width | 420 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193019 |
| Port / Connector type | ASS2.1 7 pin, 4 x 2 pin ASS2 |
| Number of Connectors / Ports | 15 |
| Light Function | with rear fog light, with reverse light, with indicator, with taillight, with stop light, with reflector (triangular), without licence plate light |
| Depth | 85 mm |
| Protection Type (IP Code) | IP54 |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.33
Important compatibility info
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Placement on Vehicle | Rear |
| Additional Information 2 | with bolts/screws |
| Outer diameter | 177 mm |
| Extra Description | ProKit |
| Replaces | 104553 |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (40857)
- 3x Febi Screw (43596)
- 3x Febi Screw (43400)
£138.30
Important compatibility info
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.30
Important compatibility info
| Number of Ribs | 6 |
| Function | V-Ribbed Belt Set |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Length | 1199 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (184943)
- 1x Febi Belt Tensioner, v-ribbed belt (180827)
£138.30
Important compatibility info
| Outer diameter 2 | 76 mm |
| Outer diameter 1 | 70 mm |
| Width of castor bearing surface | 22 mm |
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.20
Important compatibility info
| Type | Chain Kit, oil pump drive |
| Function | Chain Kit, oil pump drive |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 62 |
| Timing Chain Size | G53HS |
| Additional Information 2 | Requires special tools for mounting |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (171579)
- 1x Febi Chain Tensioner, oil pump drive (171230)
£138.20
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 122. 81 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (30779)
- 1x Febi Water Pump, engine cooling (22206)
£138.19
Important compatibility info
| Timing Chain Size | G53HS-8, G53HS-7 |
| Chain Type | Simplex, with chain lock |
| Placement on Vehicle | Upper |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Number of Chain Links | 86 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49508)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Gasket Set, cylinder head cover (107453)
£138.14
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 49 mm |
| Current Strength | 80 A |
| Type | Alternator |
| Function | Alternator |
| for OE number | 5705.KW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.10
Important compatibility info
| Additional Information | with fastening/mounting material |
| Function | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Inner diameter | 42 mm |
| Additional Information 2 | with rolling bearing |
| Length | 238 mm |
| Placement on Vehicle | Front |
| Hole Spacing | 204 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.10
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
| Min. Length | 433 mm |
| Pipe Diameter | 65 mm. 76 mm |
| Function | Shock Absorber |
| Max. Length | 688 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting points diameter | 20 mm |
| Shock Absorber Type | Oil Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.09
Important compatibility info
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Inner diameter 1 | 14 mm |
| Rotation Direction | Clockwise rotation |
| Type | Hydraulic Pump, steering |
| Inner diameter 2 | 16 mm |
| Number of mounting bores | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.97
Important compatibility info
| Hole Spacing | 130 mm |
| Placement on Vehicle | Rear Axle |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.94
Important compatibility info
| Type | Alternator |
| Alternator Charge Current | 150 A |
| Pulleys | with belt pulley |
| Function | Alternator |
| Belt Pulley Diameter | 54 mm |
| for OE number | 5705.GC |
| Voltage | 12 V |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.84
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.84
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.84
Important compatibility info
| Number of Chain Links | 142 |
| Function | Timing Chain |
| Chain Type | Simplex, Closed chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.84
Important compatibility info
| Outer diameter | 396 mm |
| Material | Steel |
| Type | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Function | Air Tank, compressed-air system |
| Capacity | 100 l |
| Length | 915 mm |
| Number of Connectors / Ports | 4 |
| Operating Pressure | 10 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.79
Important compatibility info
| Function | Throttle body |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.77
Important compatibility info
| Rotation Direction | Anticlockwise rotation |
| Pressure | 200 bar |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| for OE number | 003 460 63 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.75
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Length | 650 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.72
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M32 x 1,5 |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Cone Size | 30.2 mm |
| Rod/Strut | Push Rod |
| Length | 1217 mm |
| Placement on Vehicle | Front Axle |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.67
Important compatibility info
| Extra Description | ProKit |
| Adjustable | adjustable |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.67
Important compatibility info
| Type | Starter |
| Function | Starter |
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 2 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.52
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Inner diameter | 41 mm |
| Additional Information 2 | with rolling bearing |
| Length | 220 mm |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Rear |
| Hole Spacing | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.52
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Additional Information | without gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.44
Important compatibility info
| Function | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Paired article numbers | 40129 |
| Additional Information 2 | with bearing |
| Outer diameter | 53 mm |
| Length | 235 mm |
| Placement on Vehicle | both sides |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (40730)
- 1x Febi Lock Ring, steering knuckle (40731)
- 1x Febi Lock Ring, steering knuckle (40736)
- 1x Febi Seal Ring, steering knuckle (40738)
- 1x Febi Seal Ring, steering knuckle (40737)
- 1x Febi O-Ring Repair Set (40739)
- 1x Febi Lock Ring, steering knuckle (40740)
- 4x Febi Screw (40741)
- 2x Febi Repair Kit, kingpin (40742)
- 1x Febi Grease Nipple (01096)
- 1x Febi Grease Nipple (06635)
- 1x Febi Spacer, kingpin (46436)
- 1x Febi Spacer, kingpin (46437)
- 1x Febi Spacer, kingpin (46438)
- 1x Febi Spacer, kingpin (46439)
- 1x Febi Spacer, kingpin (46440)
- 1x Febi Spacer, kingpin (46441)
£137.42
Important compatibility info
| Outer diameter | 86 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 32 mm |
| Bearing Type | Angular Ball Bearing |
| Width | 142 mm |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.35
Important compatibility info
| Width | 60 mm |
| Outer diameter | 172 mm |
| Inner diameter | 40 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.32
Important compatibility info
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.31
Important compatibility info
| Function | Throttle body |
| Type | Throttle body |
| Additional Information | with gasket/seal |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Height | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.29
Important compatibility info
| Rotation Direction | Anticlockwise rotation |
| Mounting points diameter | 11 mm |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M18 x 1,5 |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.25
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Outer diameter | 157 mm |
| Width | 58 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Inner diameter | 39 mm |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (175024)
- 4x Febi Centering Bolt, crankshaft pulley (33076)
£137.24
Important compatibility info
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Paired article numbers | 178916 |
| Additional Information 2 | without screw |
| Placement on Vehicle | Exhaust Side |
| Number of Teeth | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.20
Important compatibility info
| Number of Teeth | 36 |
| Placement on Vehicle | Intake Side |
| Additional Information 2 | without screw |
| Paired article numbers | 177847 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.20
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Internal Thread Size | M16 x 1,5, M18 x 1,5 |
| Type | Mounting, engine |
| for OE number | 960 241 78 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.18
Important compatibility info
| Additional Information 2 | with valves |
| Additional Information | with gaskets/seals |
| Type | Bearing Bracket, camshaft |
| Function | Bearing Bracket, camshaft |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bearing Bracket, camshaft (171970)
- 1x Febi Control Valve, camshaft adjustment (40201)
- 1x Febi Central Magnet, camshaft adjustment (40198)
- 1x Febi Gasket, timing case cover (171570)
- 1x Febi Gasket, timing case cover (170573)
£137.16
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1743 mm |
| Cone Size | 30 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Pipe Diameter | 52 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
| for OE number | 2 161 884 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.12
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 45528 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 25.5 mm |
| Cone Size | 20.7 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| External Thread Size | M14 x 1,5 |
| Additional Information | with rubber mounts, with lock nut |
| Replaces | 45525 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (45525)
- 1x Febi Nut (40161)
£137.07
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 45527 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 20.7 mm |
| Cone Size 2 | 25.5 mm |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (45526)
- 1x Febi Nut (40161)
£137.07
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye |
| Max. Length | 748 mm |
| Min. Length | 473 mm |
| Pipe Diameter | 73.1 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 21 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.01
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Placement on Vehicle | Exhaust Side |
| Paired article numbers | 174705 |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.95
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Min. Length | 335 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.89
Important compatibility info
| Additional Information 2 | with gear |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.85
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023