Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Rubber |
Inner diameter | 15 mm |
Function | Mounting, stabiliser bar |
Weight | 0.03 kg |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 271 mm |
Height | 14 mm |
Width | 164 mm |
Additional Information 2 | with oil sump gasket |
Weight | 0.245 kg |
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 23 |
Paired article numbers | 183436 |
Function | Tie Rod End |
Weight | 0.522 kg |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M12 x 1,5 |
Length | 197 mm |
Placement on Vehicle | Front Axle Left |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cylinder Head, air compressor |
Function | Cylinder Head, air compressor |
Weight | 1.2 kg |
Additional Information 2 | with bolts/screws, with spacer plate |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Spin-on Filter |
Weight | 0.39 kg |
Type | Oil Filter |
Function | Oil Filter |
Internal Thread Size | 3/4" - 16 UNF |
Outer diameter | 78 mm |
Height | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.120 kg |
Placement on Vehicle | Rear Axle |
Length | 40 mm |
Material | Rubber/Metal |
Outer diameter | 40.5 mm |
Inner diameter | 20 mm |
Paired article numbers | 05215 |
Function | Mounting, panhard rod |
Type | Mounting, panhard rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Weight | 0.84 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Hose |
Internal Thread Size | M10 x 1 |
Placement on Vehicle | Rear Axle Right |
Length | 423 mm |
Paired article numbers | 185023 |
Weight | 0.160 kg |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 100.6 mm |
Notches / Holes Number | 3 |
Function | Intake Valve |
Type | Intake Valve |
Weight | 0.035 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 432 mm |
Housing Diameter | 19 mm. 252 mm |
Eject Force | 600 N |
Stroke | 139 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Weight | 0.275 kg |
Type | Gas Spring, boot/cargo area |
Mounting points diameter | 18 mm |
Housing length | 252 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Function | Tie Rod End |
Thickness | 79 mm |
Placement on Vehicle | Front Axle Right |
Length | 156 mm |
Spanner Size | 22 |
Weight | 0.98 kg |
Type | Tie Rod End |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 43010 |
Weight | 0.832 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Internal Thread Size | M15 x 1,5 |
Weight | 0.5 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 144 mm |
Thickness | 73 mm |
Spanner Size | 19 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod End |
Thickness | 83 mm |
Spanner Size | 22 |
Paired article numbers | 43696 |
Placement on Vehicle | Front Axle Right |
Length | 250 mm |
Width | 50 mm |
Weight | 0.880 kg |
External Thread Size | M14 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Shape/Form | round |
Height | 140 mm |
Width | 140 mm |
Inspection Tag | ADR |
Light Function | with rear fog light (LED), without number plate light |
Weight | 0.452 kg |
Depth | 86 mm |
Voltage from | 12 V |
Voltage to | 24 V |
Type | Tail Light Assembly |
Fulfils ECE norm | R148, R150, R10 |
Temperature range from | -40 °C |
Temperature range to | 65 °C |
Function | Tail Light Assembly |
Distance of fastening bolts | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Duplex, Simplex, Closed chain |
Number of Chain Links | 266. 68 |
Function | Timing Chain Kit |
Weight | 3.6 kg |
Type | Timing Chain Kit |
for OE number | 948 105 169 10 S1 |
Timing Chain Size | D53HP |
Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (40769)
- 2x Febi Gear/Sprocket, camshaft (40774)
- 1x Febi Tensioner, timing chain (40776)
- 1x Febi Guide, timing chain (44252)
- 2x Febi Guide, timing chain (44254)
- 1x Febi Guide, timing chain (44253)
- 1x Febi Guide, timing chain (44267)
- 1x Febi Timing Chain (40777)
- 1x Febi Chain, oil pump drive (40786)
Important compatibility info
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 379 mm |
Weight | 3.5 kg |
Paired article numbers | 176304 |
Operating Mode | Mechanical |
Min. Length | 218 mm |
Pipe Diameter | 42 mm. 101 mm |
Mounting points diameter | 12 mm |
Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Weight | 0.026 kg |
Outer Length | 719 mm |
Type | Oil Dipstick |
Function | Oil Dipstick |
Extra Description | febi Plus |
Length from grip collar to max. marking | 621 mm |
Length from grip collar to min. marking | 666 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Weight | 2.7 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 289 mm |
Type | Shock Absorber, driver cab suspension |
Min. Length | 209 mm |
Function | Shock Absorber, driver cab suspension |
Pipe Diameter | 36 mm |
Mounting points diameter | 12 mm. 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Function | Gasket, exhaust manifold |
Weight | 0.045 kg |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2020 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 10 |
Function | V-Ribbed Belt |
Weight | 0.329 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 178 mm |
Inner diameter | 140 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Steel |
Number of Teeth, ABS ring | 100 |
Function | Sensor Ring, ABS |
Weight | 0.18 kg |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.21 kg |
Function | Filter Set, cabin air |
Type | Filter Set, cabin air |
Filter type | Activated Carbon Filter |
Width | 186 mm |
Height | 25 mm |
Length | 187 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.988 kg |
Placement on Vehicle | Front Axle Left, Upper |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 47735 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32231)
- 2x Febi Mounting and Bolting Kit, control/trailing arm (29279)
Important compatibility info
Function | Protection Lid, wheel hub |
Type | Protection Lid, wheel hub |
Weight | 0.86 kg |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Thread Size | M28x1,5 |
External Teeth, Wheel Side | 28 |
Weight | 8.782 kg |
External Teeth, Diff.Side | 37 |
Number of Teeth, ABS ring | 54 |
Min. Length | 768 mm |
ABS Ring Diameter | 110 mm |
Wheel Sided Joint Diameter | 99 mm |
Transmission-side joint diameter | 89 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 48389 |
Function | Timing Chain Kit |
Number of Chain Links | 190 |
Chain Type | Duplex, with chain lock |
Weight | 2.436 kg |
Type | Timing Chain Kit |
Additional Information | with slide rails, with chain tensioner |
Timing Chain Size | D67HR, D67HP |
Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide Rails Kit, timing chain (30279)
- 1x Febi Timing Chain (25445)
- 1x Febi Tensioner, timing chain (26750)
Important compatibility info
Additional Information | with fastening/mounting material |
Length | 244 mm |
Hole Spacing | 201 mm |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Bearing Type | Rolling Bearing |
Weight | 3.503 kg |
Inner diameter | 60 mm |
Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 186 mm |
Additional Information | with lock nut |
Spanner Size | 23 |
Paired article numbers | 196248 |
Weight | 0.767 kg |
Type | Tie Rod End |
Function | Tie Rod End |
External Thread Size | M12 x 1,25 |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.006 kg |
Material | Stainless Steel |
Outer diameter | 95 mm |
Type | Gasket, exhaust pipe |
Function | Gasket, exhaust pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Operating Mode | Pneumatic |
Paired article numbers | 192763 |
Weight | 2.0 kg |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Max. Length | 345 mm |
Min. Length | 230 mm |
Mounting points diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Extra Description | febi Plus |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Weight | 1.442 kg |
Additional Information | with lock nut, with rubber mounts |
Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Cone Size 2 | 21 mm |
Cone Size 1 | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.05 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.7 kg |
Outer diameter | 60 mm |
Hose Length | 480 mm |
Wall Thickness | 6 mm |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
Weight | 0.929 kg |
Type | Suspension Strut Support Mount |
Length | 64 mm |
Width | 165 mm |
Outer diameter | 70 mm |
Additional Information 2 | without ball bearing |
Inner diameter | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1800 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Sensor, wheel speed |
Weight | 0.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.193 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Length | 56 mm |
Material | Rubber/Metal |
Thickness | 54 mm |
Function | Mounting, control/trailing arm |
Inner diameter | 21 mm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Thread Length | 25.5 mm |
Rod/Strut | Coupling Rod |
Weight | 0.258 kg |
Paired article numbers | 103167 |
Outer diameter | 8 mm |
Placement on Vehicle | Rear Axle Right |
Length | 55 mm |
Material | Steel |
External Thread Size | M10 x 1,5 |
Thickness | 59 mm |
Additional Information | with nuts |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 32 mm |
Function | Oil Cooler, engine oil |
Outer diameter | 18 mm |
Weight | 0.36 kg |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Placement on Vehicle | Upper, Rear Axle Left, Rear |
Paired article numbers | 103736 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.751 kg |
Steering arm type | Control Arm |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (101697)
- 1x Febi Bolt, control arm (43442)
- 1x Febi Screw (38098)
- 2x Febi Nut (34653)
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Front |
Weight | 1.983 kg |
External Thread Size | M10 x 1,25 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 0.178 kg |
Function | Ignition Coil |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 29425 |
Material | Cast Steel |
Weight | 4.25 kg |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 18.35 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 337 mm |
Thickness | 100.5 mm |
Brake Disc Thickness | 30 mm |
Brake Disc Type | Solid |
Minimum thickness | 28 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 91.5 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Rim Hole Number | 10 -Hole |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.090 kg |
Height | 72 mm |
Function | Fuel filter set |
Type | Fuel filter set |
Filter type | Filter Insert |
Outer diameter | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Disc |
Number of mounting bores | 1 |
Minimum thickness | 22 mm |
Thickness | 48.8 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Centering Diameter | 79 mm |
Bolt Hole Circle Diameter | 120 mm |
Rim Hole Number | 5 -Hole |
Brake Disc Thickness | 25 mm |
Placement on Vehicle | Rear Axle |
Rotor Style | Internally Vented |
Outer diameter | 350 mm |
Weight | 9.015 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod End |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left |
Length | 171 mm |
Paired article numbers | 108856 |
Weight | 0.49 kg |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M16 x 1,5 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Placement on Vehicle | Front Axle Right, Front Axle Left |
Type | Joint Kit, drive shaft |
Thread Size | M16x1,5 |
External Teeth, Wheel Side | 36 |
Internal Teeth, wheel side | 30 |
Weight | 1.632 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Type | Disc Brake |
Parameter | Typ 16 / 24 |
Stroke | 64 mm |
Distance of fastening bolts | 120 mm |
Piston Rod Length | 15 mm |
Function | Diaphragm Brake Cylinder |
Internal Thread Size | M16 x 1,5 |
Weight | 6.74 kg |
Type | Diaphragm Brake Cylinder |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 5 |
Pulleys | with belt pulley |
Belt Pulley Diameter | 58 mm |
Alternator Charge Current | 130 A |
Function | Alternator |
Weight | 5.75 kg |
Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023