Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Centre |
| Length | 1245 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.27
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Length | 130 mm |
| Inner diameter 1 | 31 mm |
| Inner diameter 2 | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172874)
- 1x Febi Molybdenum Grease (02582)
£15.27
Important compatibility info
| for OE number | 56 84 109 |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 105 mm |
| Material | Steel |
| Outer diameter | 20 mm. 53 mm |
| Thickness | 90 mm |
| Spanner Size | 27 |
| Colour | Grey |
| Thread Length | 80 mm. 23 mm |
| Thread Type | with right-hand thread |
| Cone Size | 22 mm |
| Pipe Diameter | 30 mm |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M18 x 1,5, M28 x 1,5 RHT |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Placement on Vehicle | Front Axle Right, outer |
| Paired article numbers | 25190 |
| Thread Type | with right-hand thread |
| Cone Size | 12 mm |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5, M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 187.5 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber with fabric lining |
| Function | Repair Kit, stabiliser bush |
| Internal Thread Size | M8 x 1,25 |
| Type | Repair Kit, stabiliser bush |
| Inner diameter 1 | 22.5 mm |
| Inner diameter 2 | 26.5 mm |
| for OE number | 124 320 19 47 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (14952)
- 2x Febi Mounting, stabiliser bar (14950)
- 8x Febi Nut (08565)
- 8x Febi Washer (08567)
£15.26
Important compatibility info
| Additional Information | with holder |
| Placement on Vehicle | Front Axle |
| Function | Mounting Kit, stabiliser bar |
| Inner diameter | 21 mm |
| Additional Information 2 | with bolts/screws |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (17817)
- 2x Febi Bracket, stabiliser mounting (37755)
- 2x Febi Nut (32615)
- 2x Febi Screw (32561)
£15.26
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1688 mm |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, outer |
| Paired article numbers | 25192 |
| Thread Type | with left-hand thread |
| Cone Size | 12 mm |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,5, M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Material | Plastic |
| Function | Valve, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Valve, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 105 mm |
| Material | Steel |
| Spanner Size | 17 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Function | Air Filter |
| Width | 135 mm |
| Height | 48 mm |
| Length | 322 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Additional Information 2 | with pre-filter |
| Height | 153 mm |
| Outer diameter | 160 mm |
| Inner diameter | 79 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 104 mm |
| Spanner Size | 24 |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 2 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Additional Information 2 | with anti-squeak plate, with fastening material |
| Placement on Vehicle | Front Axle |
| Length | 106.3 mm |
| Width | 49.7 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 2033 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Height | 142 mm |
| Outer diameter | 65 mm |
| Filter type | In-Line Filter |
| Pipe Diameter | 10 mm. 8 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information | with holder |
| Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Function | Gasket, automatic transmission oil sump |
| Type | Gasket, automatic transmission oil sump |
| Length | 396 mm |
| Thickness | 2.5 mm |
| Width | 367 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.26
Important compatibility info
| Material | PU (Polyurethane) |
| Placement on Vehicle | Rear Axle |
| Thickness | 127 mm |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (23410)
- 2x Febi Protective Cap/Bellow, shock absorber (46719)
£15.26
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023