Important compatibility info
| Height | 123 mm |
| Additional Information 2 | with seal ring |
| Function | Fuel filter |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Inner diameter | 16 mm |
| Outer diameter | 67 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 274 mm |
| Height | 69 mm |
| Width | 233 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 10 mm |
| Outer diameter | 95 mm |
| Material | Metal |
| Width | 29.5 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Steel |
| Paired article numbers | 29828 |
| Colour | Silver |
| Surface | Zinc-coated |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Steel |
| Paired article numbers | 29829 |
| Colour | Silver |
| Surface | Zinc-coated |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 28.6 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Cast Iron |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 92.2 mm |
| Valve stem diameter | 6 mm |
| Valve head diameter | 29 mm |
| Notches / Holes Number | 3 |
| Function | Exhaust Valve |
| Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Inner diameter | 55 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Length | 1460 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 950 mm |
| Number of Connectors / Ports | 2 |
| Function | Warning Contact, brake pad wear |
| Brake Type | Disc Brake |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Gasket outer diameter | 89.5 mm |
| Gasket inner diameter | 82.5 mm |
| Outer diameter | 81 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
| Inner diameter | 21 mm |
| Filter type | Filter Insert |
| Height | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 60 mm |
| Width | 51 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Hose |
| Paired article numbers | 180952 |
| Placement on Vehicle | Rear Axle Left |
| Length | 219 mm |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 219 mm |
| Paired article numbers | 180951 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Air Filter |
| Function | Air Filter |
| Width | 221 mm |
| Filter type | Filter Insert |
| Height | 75 mm |
| Length | 250 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Thermostat Housing |
| Additional Information | with gasket/seal |
| Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 43 mm |
| Outer diameter | 55 mm |
| Inner diameter | 25 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (21843)
- 1x Febi Nut, kingpin (19893)
Important compatibility info
| Function | Fuel filter |
| Outer diameter | 93 mm |
| Filter type | Filter Insert, with water separator |
| Height | 139 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 93 mm |
| Width | 41 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.6 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | with acoustic wear warning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 367 mm |
| Housing Diameter | 15 mm |
| Eject Force | 320 N |
| Stroke | 146 mm |
| Mounting points diameter | 8 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, bonnet |
| Housing length | 193.5 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 20 mm |
| Material | Metal |
| Outer diameter | 72 mm |
| Inner diameter | 10 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| Length | 192 mm |
| Material | Steel |
| Paired article numbers | 30225 |
| Extra Description | ProKit |
| Internal Thread Size | M15 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 114 mm |
| Material | Thermoplast |
| Inner diameter 1 | 26 mm |
| Inner diameter 2 | 81 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29962)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Rear Axle, both sides |
| Outer diameter | 78 mm |
| Inner diameter | 37 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle |
| Length | 86 mm |
| Material | Rubber |
| Inner diameter 2 | 65 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100437)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Height | 134 mm |
| Outer diameter | 81 mm |
| Filter type | In-Line Filter |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























