Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 112 mm |
| Inner diameter 1 | 34 mm |
| Material | Thermoplast |
| Length | 170 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (18575)
- 1x Febi Clamping Clip (38759)
- 1x Febi Clamping Clip (45648)
- 3x Febi Molybdenum Grease (02582)
£15.05
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Inner diameter | 14.5 mm |
| Outer diameter | 65.5 mm |
| Width | 30 mm |
| for OE number | 028 105 263 D S1 |
| Placement on Vehicle | Front |
| Engine Management | Timing Belt |
| Function | Sprocket, crankshaft |
| Number of Teeth | 22 |
| Type | Sprocket, crankshaft |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (25170)
- 1x Febi Pulley Bolt (09590)
£15.05
Important compatibility info
| Outer diameter | 65 mm |
| Width | 30 mm |
| for OE number | 028 105 263 E S1 |
| Inner diameter | 14.5 mm |
| Placement on Vehicle | Front |
| Engine Management | Timing Belt |
| Function | Sprocket, crankshaft |
| Type | Sprocket, crankshaft |
| Number of Teeth | 22 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (25166)
- 1x Febi Pulley Bolt (09590)
£15.05
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Length | 1930 mm |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 585 mm |
| Spanner Size | 17 |
| Function | Brake Hose |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Height | 80 mm |
| Outer diameter | 394 mm |
| Inner diameter | 293 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 1924 mm |
| Paired article numbers | 36674 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
| Additional Information | with accessories |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Function | Seal Kit, multi-valve |
| Type | Seal Kit, multi-valve |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, air compressor (35701)
- 1x Febi Seal, air compressor (35729)
- 1x Febi Cylinder Head Gasket, air compressor (35730)
- 1x Febi Seal Kit, multi-valve (35768)
- 2x Febi Nut (35732)
- 2x Febi Seal Kit, multi-valve (35733)
- 1x Febi Seal, air compressor (35731)
£15.05
Important compatibility info
| Joint Type | Tripod Joint |
| Length | 95 mm |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100213)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
£15.05
Important compatibility info
| Material | Steel |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Length | 1330 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Material | FPM (fluoride rubber) |
| Function | Repair Kit, shift cylinder |
| Type | Repair Kit, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Length | 1548 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Thickness | 20 mm |
| Function | Nut, kingpin |
| Spanner Size | 67 |
| Internal Thread Size | M52 x 1,5 |
| Bolt Head/Nut Design | Male Star |
| Type | Nut, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Material | Plastic |
| Function | Cap, coolant tank |
| Opening Pressure | 2 bar |
| for OE number | 17 11 7 639 021 |
| Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 462 mm |
| Spanner Size | 15 |
| Thread Length | 10 mm |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 299 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod, Suspension Rod |
| Thickness | 79.1 mm |
| Paired article numbers | 104619 |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 35.5 mm |
| Additional Information | with nuts |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023