Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Teeth, ABS ring | 43 |
| Inner diameter | 61 mm |
| Outer diameter | 78 mm |
| Material | Steel |
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 263 mm |
| External Thread Size | M12 x 1, M14 x 1,5 |
| Additional Information | with counter nut |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| for OE number | 3812.F6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 345 mm |
| Height | 64 mm |
| Type | Air Filter |
| Filter type | Filter Insert |
| Width | 156 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Function | Adapter, oil pressure switch / Adapter, pressure switch / Adapter, stop light switch |
| Type | Adapter, oil pressure switch / Adapter, pressure switch / Adapter, stop light switch |
| Length | 115 mm. 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Driver Position | for left-hand/right-hand drive vehicles |
| Type | Cover, exterior mirror |
| Function | Cover, exterior mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Length | 253 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Compressed-air Gun |
| Additional Information | with hose |
| Type | Compressed-air Gun |
| Material | PU (Polyurethane) |
| Additional Information 2 | with adapter |
| Hose length | 3 m |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 263.5 mm |
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M12 x 1, M14 x 1,5 |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 142 mm |
| Paired article numbers | 26798 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Left |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter | 39 mm. 34 mm |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Hose Length | 470 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 184 mm |
| Internal Thread Size | 3/4" - 16 UNF |
| Outer diameter | 108 mm |
| Filter type | Spin-on Filter |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 304 mm |
| Outer diameter | 169 mm |
| Inner diameter | 97 mm. 111 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 52 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Inner diameter | 14.5 mm |
| Outer diameter | 39.5 mm |
| Material | Rubber/Metal |
| Width | 68 mm |
| Length | 68 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 85 mm |
| Inner diameter 1 | 35 mm |
| Material | Thermoplast |
| Length | 118 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38760)
- 1x Febi Clamping Clip (45644)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Length | 558 mm |
| Height | 71 mm |
| Width | 77 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 182 mm |
| Outer diameter | 94 mm |
| Filter type | Spin-on Filter |
| Type | Fuel filter |
| Housing material | Metal |
| Function | Fuel filter |
| Gasket outer diameter | 71.7 mm |
| Gasket inner diameter | 62.3 mm |
| Internal Thread Size | M14 x 2, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 342 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M12 x 1,25, M14 x 1,5 |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information | with fastening/mounting material |
| Steering arm type | for control arm |
| Replaces | 23243 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Inner diameter | 18 mm |
| Thickness | 51 mm |
| Outer diameter | 55 mm |
| Placement on Vehicle | Front, Lower, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut |
| Length | 196 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Inner Tie Rod |
| External Thread Size | M18 x 1,5, M16 x 1 |
| Spanner Size | 32 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Spanner Size | 13, 32 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| Length | 316 mm |
| External Thread Size | M12 x 1, M14 x 1,5 |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 67 mm |
| Width | 213 mm |
| Filter type | Filter Insert |
| Length | 375 mm |
| Type | Air Filter |
| Function | Air Filter |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Transmission Type | 5-Speed Automatic Transmission |
| Additional Information 2 | with oil sump gasket |
| Length | 175 mm |
| Height | 52 mm |
| Width | 132 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
| Seal Material | Rubber |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
| Thread Type | with left-hand thread |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 24 |
| Number of Connectors / Ports | 3 |
| Function | Oil Pressure Switch |
| Switch point to | 0.55 bar |
| Switch point from | 0.3 bar |
| Colour | White |
| Length | 50 mm |
| Type | Oil Pressure Switch |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 116 mm |
| Material | Thermoplast |
| Inner diameter 2 | 93 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (44376)
- 1x Febi Circlip (03185)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45645)
Important compatibility info
| External Thread Size | M10 x 1 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 169 mm |
| Spanner Size | 17 |
| Paired article numbers | 180522 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 27 mm |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Material | Cast Iron |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| External Thread Size | M14 x 1,5 |
| Function | Camber Correction Screw |
| Type | Camber Correction Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camber Correction Screw (109722)
- 1x Febi Camber Correction Screw (109721)
- 4x Febi Washer (07755)
- 2x Febi Nut (06877)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 78 mm |
| Outer diameter | 41 mm |
| Thickness | 54 mm |
| Inner diameter | 16.5 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 134 mm |
| Width | 56 mm |
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 435 mm |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, Left |
| Length | 296 mm |
| Height | 40 mm |
| Width | 232 mm |
| Filter type | Filter Insert |
| Paired article numbers | 101334 |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Exterior Door Handle |
| Placement on Vehicle | Rear, Left |
| Material | Plastic |
| Paired article numbers | 15442 |
| Colour | Black |
| Function | Exterior Door Handle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 18047 |
| Placement on Vehicle | Front Axle |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
| Inner diameter 2 | 27.5 mm |
| Inner diameter 1 | 22.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (17678)
- 2x Febi Mounting, stabiliser bar (17679)
- 8x Febi Nut (08565)
- 8x Febi Washer (08567)
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, inner |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (27145)
- 1x Febi Nut (21557)
Important compatibility info
| Width | 153 mm |
| Material | Rubber/Metal |
| Outer diameter | 77 mm. 46 mm |
| Thickness | 64 mm |
| Inner diameter | 34 mm |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 18 mm |
| Material | Plastic |
| Outer diameter | 126.5 mm |
| Inner diameter | 82 mm |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 8 mm |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Right |
| Length | 155 mm |
| Paired article numbers | 21875 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 8 mm |
| Material | Steel |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Length | 155 mm |
| Paired article numbers | 21876 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 141 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Surface | Zinc-coated |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 124 mm |
| Additional Information | with counter nut |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 |
| Length | 1059 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Chemical Properties | Elastic |
| Additional Information 2 | Requires special tools for mounting |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 14.5 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
| Outer diameter | 69 mm |
| Thickness | 60 mm |
| Length | 69 mm |
| Width | 69 mm |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 171 mm |
| Paired article numbers | 108855 |
| Function | Tie Rod End |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Coolant Flange |
| Function | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Rear Axle |
| Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 100 mm |
| Thickness | 70 mm |
| Spanner Size | 17 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 33 mm |
| Inner diameter | 18 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 60.5 mm |
| Colour Coding | Blue |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (06663)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































