Important compatibility info
| Width | 213 mm |
| Filter type | Filter Insert |
| Length | 268 mm |
| Height | 72 mm |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 153 mm |
| Diameter | 1 mm |
| Additional Information | with nuts |
| Material | Steel |
| Spanner Size | 17 |
| Rod/Strut | Coupling Rod |
| Thread Length | 28 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 443 mm |
| Housing Diameter | 15 mm |
| Eject Force | 380 N |
| Stroke | 150 mm |
| Mounting points diameter | 8 mm |
| Piston conrod diameter | 6 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 265.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 83 °C |
| Heating / Cooling | with vent hole |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (22310)
- 1x Febi Gasket, water pump (03505)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Steel |
| Outer diameter | 188 mm |
| Inner diameter | 160 mm |
| Number of Teeth, ABS ring | 80 |
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 198 mm |
| Height | 20 mm |
| Width | 128.5 mm |
| Type | Air Filter, traction battery casing |
| Function | Air Filter, traction battery casing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | engine sided |
| Length | 1038 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 4 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 66 mm |
| Material | Rubber |
| Outer diameter | 66 mm |
| Inner diameter | 15 mm |
| Thickness | 32 mm |
| Placement on Vehicle | Rear Axle, Rear |
| Function | Mounting, differential |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 340 mm |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 197 mm |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5, M18 x 1,5 |
| Additional Information | with counter nut |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 16 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M12 x 1,25 |
| Mounting points diameter | 10.5 mm |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 20.6 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 17 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 95 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Colour | black |
| External Thread Size | M10 x 1,25 |
| Thread Length | 18.5 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Pipe Diameter | 8 mm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Inner Tie Rod |
| Length | 183 mm |
| Additional Information | with counter nut |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 72 mm |
| Inner diameter | 37 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Replaces | 100701 |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring, with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut, kingpin (10736)
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Function | Hydraulic Filter Kit, automatic transmission |
| Seal Material | Rubber |
| Filter type | Screen Filter |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, automatic transmission oil sump (32877)
- 1x Febi Hydraulic Filter, automatic transmission (14266)
Important compatibility info
| External Thread Size | M8 x 1,25 |
| Extra Description | ProKit |
| Additional Information | with rubber mounts, with nuts |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Spanner Size | 13, 12 |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 313 mm |
| Height | 37 mm |
| Width | 263 mm |
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle Left, Upper, Rear, Rear Axle Right |
| Material | Rubber/Metal |
| Inner diameter | 12.2 mm |
| Thickness | 41 mm |
| Outer diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 164 mm |
| Additional Information 2 | with pressure regulator |
| Filter type | In-Line Filter |
| Pressure | 3 bar |
| Type | Fuel filter |
| Function | Fuel filter |
| Outer diameter | 61 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 360 mm |
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (26183)
- 2x Febi Protective Cap/Bellow, shock absorber (26941)
Important compatibility info
| Material | FPM (fluoride rubber) |
| Outer diameter | 65 mm |
| Function | Shaft Seal, manual transmission |
| Inner diameter | 50 mm |
| Thickness | 13.5 mm |
| Type | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 123 mm |
| Width | 46.2 mm. 41.1 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter 1 | 30 mm |
| Function | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
| Inner diameter 2 | 75 mm |
| Material | Thermoplastic polyester elastomer |
| Length | 103 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (179804)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 95.6 mm |
| Width | 43.8 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 13.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Length | 85 mm |
| Width | 55 mm |
| Thickness | 45 mm |
| Function | Plug-in housing, automatic transmission (control unit) |
| Extra Description | febi Plus |
| Type | Plug-in housing, automatic transmission (control unit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 232 mm |
| Outer diameter | 109 mm |
| Filter type | Spin-on Filter |
| Function | Oil Filter |
| Internal Thread Size | M30 x 2 |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 81 mm |
| Height | 34 mm |
| Width | 70 mm |
| Type | Urea Filter |
| Function | Urea Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























