Important compatibility info
| External Thread Size | M14 x 2 |
| Internal Thread Size | M18 x 1,5 |
| Additional Information | with lock nut |
| Function | Tie Rod End |
| Paired article numbers | 38865 |
| Length | 112 mm |
| Placement on Vehicle | Front Axle Right |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 180 mm |
| Width | 62 mm |
| Thickness | 108 mm |
| Thread Type | with right-hand thread |
| Cone Size | 26 mm |
| Function | Tie Rod End |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Thread Length | 85 mm |
| Thread Type | with right-hand thread |
| Colour | Grey |
| Spanner Size | 36 |
| Length | 120 mm |
| Material | Steel |
| Outer diameter | 27 mm. 70 mm |
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right |
| Rod/Strut | Guide Rod |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with crown nut and split pin, with sleeve, with threaded sleeve |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (02954)
Important compatibility info
| Inner diameter | 110 mm |
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | transmission sided |
| Material | ACM (Polyacrylate) |
| Outer diameter | 130 mm |
| Thickness | 13 mm |
| Type | Shaft Seal, crankshaft |
| Replaces | 11482 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | T30 |
| Bolt Head/Nut Design | Female Torx |
| Function | Bolt, automatic transmission oil sump |
| Screw length below head | 23 mm |
| External Thread Size | M6 x 1 |
| Type | Bolt, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, stabiliser bar |
| Inner diameter | 30 mm |
| Thickness | 57 mm |
| Outer diameter | 50 mm |
| Material | Rubber |
| Width | 54 mm |
| Length | 50 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 120 mm |
| Outer diameter | 120 mm |
| Thickness | 78 mm |
| Inner diameter | 22.8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with quick couplers |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Cooling Hose | from radiator to water pipe |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Inner diameter | 90 mm |
| Outer diameter | 110 mm |
| Material | FPM (fluoride rubber), PTFE (polytetrafluoroethylene) |
| Width | 8 mm |
| Placement on Vehicle | transmission sided |
| Additional Information 2 | with mounting sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Steering | with tie rod end |
| Paired article numbers | 176733 |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Left |
| Length | 445 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (109581)
- 1x Febi Inner Tie Rod (100791)
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 180287 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from expansion tank to engine cooler |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Rubber Buffer, driver cab |
| Material | PU (Polyurethane), Rubber/Metal |
| Placement on Vehicle | Right Front, Left Front |
| Type | Rubber Buffer, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Width | 80 mm |
| Length | 100 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 165 mm |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Type | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 170 mm |
| Width | 155 mm |
| Material | Rubber/Metal |
| Inner diameter | 14 mm |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 56 mm |
| Outer diameter | 99 mm. 151 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 120 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19540)
- 1x Febi Tensioner Pulley, timing belt (21706)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (21708)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178790)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with clamps |
| Function | Bellow Kit, steering |
| Inner diameter 1 | 14 mm |
| Length | 213 mm |
| Type | Bellow Kit, steering |
| Inner diameter 2 | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (104849)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38755)
Important compatibility info
| Pipe Diameter | 9 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle Right |
| Length | 80 mm |
| Paired article numbers | 33649 |
| Rod/Strut | Coupling Rod |
| External Thread Size | M10 x 1,25 |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,25, M10 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 107 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 9 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 70 mm |
| Thickness | 90 mm |
| Inner diameter | 12 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bush Set, axle beam |
| Type | Bush Set, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Width | 115 mm |
| Thickness | 85 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Outer Length | 115 mm |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, non-steered leading axle |
| Length | 148.8 mm |
| Outer diameter | 75 mm |
| Steering arm type | for trailing arm |
| Mounting points diameter | 17 mm |
| Function | Repair Kit, control/trailing arm |
| Type | Repair Kit, control/trailing arm |
| Additional Information 2 | with spacer disc, with retaining ring |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Inner diameter | 30 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle, Front Axle |
| Outer diameter 2 | 110 mm |
| Outer diameter 1 | 105 mm |
| Height | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with fastening/mounting material, with gasket/seal |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Function | Actuator, headlight levelling |
| Extra Description | febi Plus |
| Type | Actuator, headlight levelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber |
| Inner diameter | 19 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 35 mm |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Inner diameter | 18 mm |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 187 mm |
| Material | Steel |
| Spanner Size | 18 |
| Paired article numbers | 43318 |
| Rod/Strut | Coupling Rod |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 187 mm |
| Material | Steel |
| Spanner Size | 18 |
| Paired article numbers | 43317 |
| Rod/Strut | Coupling Rod |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 44924 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (31970)
- 1x Febi Tie Rod End (31972)
- 1x Febi Bellow Kit, steering (44797)
Important compatibility info
| Placement on Vehicle | Upper Left |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Additional Information | with quick coupling |
| Type | Radiator Hose |
| for OE number | 204 501 05 82 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Length | 530 mm |
| Width | 333 mm |
| Function | Housing Cover, crankcase |
| Extra Description | febi Plus |
| Type | Housing Cover, crankcase |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 22 mm |
| Mounting points diameter | 17 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Material | Plastic |
| Outer diameter | 60 mm |
| Inner diameter | 17 mm |
| Function | Deflection/Guide Pulley, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 100 mm |
| Diameter | 11 mm |
| Material | Steel |
| Thickness | 11 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 2.5 mm |
| Inner diameter | 15 mm |
| Placement on Vehicle | Rear Axle |
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
| Additional Information 2 | with bolts/screws |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (23356)
- 2x Febi Bracket, stabiliser mounting (23604)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Internal Thread Size | M16 x 1,5 |
| Length | 127 mm |
| Replaces | 26255 |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Function | Inner Tie Rod |
| Length | 279 mm |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Length | 104 mm |
| Function | Mounting, stabiliser bar |
| Outer diameter | 95 mm. 103 mm |
| Inner diameter | 65 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Front Axle |
| Outer diameter | 70 mm. 77 mm |
| Thickness | 82 mm |
| Inner diameter | 16 mm |
| Paired article numbers | 27518 |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Combi Switch Function | with cruise control, with high beam function, with indicator function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 93 mm |
| Material | Rubber/Metal |
| Colour Coding | Blue |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (47641)
- 1x Febi Rolling Bearing, suspension strut support mount (29475)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 89 mm |
| Width | 48 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 33 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 96 mm |
| Outer diameter 2 | 161 mm. 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (174797)
Important compatibility info
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 175398 |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Radiator Hose |
| Type | Radiator Hose |
| Cooling Hose | from auxiliary water pump to crankcase |
| Inner diameter 1 | 15 mm |
| Placement on Vehicle | Lower Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with quick couplers |
| Function | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | Radiator Hose |
| Cooling Hose | from engine to engine cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter 1 | 127 mm |
| Outer diameter 2 | 131 mm |
| Height | 50 mm |
| Type | Pipe Connector, exhaust system |
| Function | Pipe Connector, exhaust system |
| Material | Stainless Steel |
| Pipe Connector | Clamping Clip |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
| Height | 26 mm |
| Outer diameter | 452 mm |
| Inner diameter | 267 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Right |
| Length | 258 mm |
| Material | Steel |
| Paired article numbers | 170550 |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































