Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter | 40 mm |
| Length | 192.5 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with counter nut |
| Spanner Size | 38 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.88
Important compatibility info
| Material | PU (Polyurethane) |
| Type | Rubber Buffer, suspension |
| Width | 56 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 80 mm |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.88
Important compatibility info
| Inner diameter 2 | 77 mm |
| Joint Type | Tripod Joint |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Placement on Vehicle | transmission sided, Front Axle |
| Length | 87 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (179729)
- 1x Febi Molybdenum Grease (02582)
£14.88
Important compatibility info
| Material | Rubber/Metal |
| Function | Bracket, muffler |
| Type | Bracket, muffler |
| Placement on Vehicle | Centre |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.88
Important compatibility info
| Height | 158 mm |
| Type | Air Filter |
| Function | Air Filter |
| Inner diameter | 78 mm |
| Filter type | Filter Insert |
| Inner diameter 1 | 31 mm |
| Outer diameter | 156 mm |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.88
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 86 mm |
| Material | Steel |
| Spanner Size | 16 |
| Paired article numbers | 34715 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Surface | Painted |
| Colour | Black |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.87
Important compatibility info
| Length | 1255 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.87
Important compatibility info
| Length | 125 mm |
| Width | 109 mm |
| Material | Rubber/Metal |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.87
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 78 mm |
| Paired article numbers | 107365 |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.87
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Length | 78 mm |
| External Thread Size | M10 x 1,25 |
| Paired article numbers | 107364 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.87
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Additional Information | with bush |
| Number of Connectors / Ports | 2 |
| Resistance | 1200 Ohm |
| Cable Length | 335 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.87
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.86
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 40 mm. 70 mm |
| Thickness | 28 mm. 76 mm |
| Inner diameter | 34 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.86
Important compatibility info
| Thickness | 65.0 mm |
| Spanner Size | 36 |
| Surface | Phosphatized |
| Weight | 0.269 kg |
| Inner thread | M24 x 3 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 6 |
| Type | Spring Clamp Nut |
| Function | Spring Clamp Nut |
£14.86
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 159 mm |
| Thickness | 73 mm |
| Spanner Size | 19 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
| Replaces | 29853 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.86
Important compatibility info
| Length | 40 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.86
Important compatibility info
| Height | 23 mm |
| Spanner Size | 105 |
| Type | Nut, kingpin |
| Function | Nut, kingpin |
| Internal Thread Size | M86 x 2 |
| Material | Steel |
| Surface | Phosphatized |
| Bolt Head/Nut Design | External Hexagon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.86
Important compatibility info
| Function | Oil Filter |
| Inner diameter 1 | 21 mm |
| Additional Information 2 | with seal ring |
| Filter type | Filter Insert |
| Gasket outer diameter | 98 mm |
| Type | Oil Filter |
| Outer diameter | 77 mm |
| Height | 107 mm |
| Inner diameter | 30 mm |
| Gasket inner diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.86
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left, Rear, Lower |
| Material | Rubber/Metal |
| Outer diameter | 74.4 mm |
| Thickness | 60 mm |
| Inner diameter | 14.6 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.86
Important compatibility info
| Function | Ball Joint |
| Type | Ball Joint |
| Cone Size | 19 mm |
| Steering arm type | for control arm |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.86
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023