Important compatibility info
Weight | 0.460 kg |
Placement on Vehicle | Right Rear |
Length | 1171 mm |
Paired article numbers | 109093 |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.351 kg |
Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
Material | Thermoplast |
Inner diameter 2 | 84 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Length | 112 mm |
Inner diameter 1 | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (21244)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45644)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.07 kg |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Number of Connectors / Ports | 2 |
Length | 1365 mm |
Placement on Vehicle | Rear Axle |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.35 kg |
Filter type | In-Line Filter |
Function | Fuel filter |
Pipe Diameter | 8 mm |
Outer diameter | 89 mm |
Height | 143 mm |
Type | Fuel filter |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Weight | 0.08 kg |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Left, Front, Lower, Front Axle Right |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Outer diameter | 48.8 mm |
Thickness | 55 mm |
Inner diameter | 12.2 mm |
Weight | 0.206 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 107 mm |
Inner diameter | 93 mm |
Filter type | Spin-on Filter, Side Stream Filtration |
Function | Oil Filter |
Internal Thread Size | 1 3/8" - 16 |
Height | 264 mm |
Weight | 1.239 kg |
Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.173 kg |
Additional Information 2 | with heat shield |
Function | Gasket, exhaust manifold |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M8 x 1 |
Eject Force | 400 N |
Type | Gas Spring, bonnet / Gas Spring, front panel |
Mounting points diameter | 16 mm |
Stroke | 40 mm |
Spanner Size | 13 |
Length | 155 mm |
Weight | 0.9 kg |
Housing Diameter | 15 mm |
Function | Gas Spring, bonnet / Gas Spring, front panel |
Housing length | 93 mm |
Piston conrod diameter | 6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 12474 |
Function | Tie Rod End |
Weight | 0.400 kg |
Extra Description | ProKit |
Type | Tie Rod End |
External Thread Size | M10 x 1,25 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.400 kg |
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 12473 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.156 kg |
Length | 1528 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Length | 296 mm |
Paired article numbers | 33920 |
Function | Inner Tie Rod |
Weight | 0.48 kg |
Extra Description | ProKit |
Type | Inner Tie Rod |
External Thread Size | M12 x 1,25, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Length | 84 mm. 50.5 mm |
Material | Aluminium |
Outer diameter | 65 mm |
Inner diameter | 14 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 262 mm |
Function | Air Filter |
Width | 175 mm |
Filter type | Filter Insert |
Weight | 0.22 kg |
Height | 58 mm |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.231 kg |
Length | 2260 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Valve seat angle | 45 ° |
Valve head diameter | 29.2 mm |
Notches / Holes Number | 1 |
Function | Exhaust Valve |
Type | Exhaust Valve |
Length | 112.5 mm |
Valve stem diameter | 6.96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.070 kg |
Material | PU (Polyurethane) |
Length | 90 mm |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Placement on Vehicle | Front Axle Right, Front Axle Left |
Width | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Placement on Vehicle | Front Axle Right |
Length | 81 mm |
Material | Steel |
Paired article numbers | 29707 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 8 mm |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.274 kg |
Placement on Vehicle | Rear Axle Left |
Length | 261 mm |
Width | 27.8 mm |
Material | Steel |
Paired article numbers | 29694 |
Rod/Strut | Coupling Rod |
External Thread Size | M10 x 1,5 |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Hole Spacing | 233 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.070 kg |
Function | Hose, crankcase ventilation |
Type | Hose, crankcase ventilation |
for OE number | 116 094 07 91 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Weight | 0.158 kg |
Inner diameter | 14 mm |
Thickness | 62 mm |
Outer diameter | 48 mm |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Thickness | 70 mm |
Function | Bushing, axle beam |
Weight | 0.285 kg |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1110 mm |
Colour | Red, Grey, Black |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.357 kg |
Placement on Vehicle | Lower Front Axle, Rear |
Material | Rubber/Metal |
Outer diameter | 64 mm |
Thickness | 63 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.075 kg |
Number of Connectors / Ports | 2 |
Pump Type | Dual Pump |
Voltage | 12 V |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Accessory Kit, disc brake pad |
Function | Accessory Kit, disc brake pad |
Weight | 0.045 kg |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Function | Flange, carburettor |
Type | Flange, carburettor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Width | 18 mm |
Number of Teeth | 124 |
Belts | with trapezoidal tooth profile |
Function | Timing Belt |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 201 mm |
Additional Information | with gaskets/seals |
Outer diameter | 121 mm |
Inner diameter | 50 mm |
Filter type | Filter Insert |
Weight | 0.251 kg |
Type | Oil Filter |
Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023