Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 109574 |
| Length | 363 mm |
| Thickness | 76 mm |
| Thread Length | 27.4 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Additional Information 2 | with screw connection |
| Trailer Hitch | with rear fog light deactivation |
| Number of Poles | 13 -pin connector |
| Function | Trailer Socket |
| Type | Trailer Socket |
| Voltage | 12 V |
| Protection Type (IP Code) | 54 |
| DIN / ISO | 11446 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter 1 | 42 mm |
| Cone Size | 20 mm |
| Type | Ball Joint |
| Function | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1325 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hose, crankcase ventilation |
| Placement on Vehicle | Upper |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 294.5 mm |
| Function | Inner Tie Rod |
| External Thread Size | M12 x 1,25, M16 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| for OE number | 57724-0X000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 330 mm |
| Width | 65 mm |
| Thickness | 35 mm |
| Spanner Size | 19 |
| Paired article numbers | 32075 |
| Rod/Strut | Coupling Rod |
| Quality/ Grade | 10.8 |
| DIN / ISO | 985 |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 330 mm |
| Width | 65 mm |
| Thickness | 35 mm |
| Spanner Size | 19 |
| Paired article numbers | 32076 |
| Rod/Strut | Coupling Rod |
| Quality/ Grade | 10.8 |
| DIN / ISO | 985 |
| External Thread Size | M12 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Voltage | 24 V |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 105.5 mm |
| Width | 56 mm |
| Inspection Tag | ECE R90 Approved |
| Additional Information 2 | with bolts/screws |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16 mm |
| Type | Brake Pad Set, disc brake |
| Replaces | 16476 |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, oil sump |
| Material | Rubber/Metal |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 493 mm |
| Housing Diameter | 19 mm |
| Eject Force | 600 N |
| Stroke | 181 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 278.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 64 mm |
| Inner diameter | 34 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with Split Pin, with axle nut, with retaining rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 32 mm |
| Material | Plastic |
| Outer diameter | 123 mm |
| Inner diameter | 74 mm |
| Function | Rolling Bearing, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 126 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (29821)
- 1x Febi Clamping Clip (45642)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
| Length | 240 mm |
| Height | 20 mm |
| Width | 169 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Width | 51 mm |
| Material | Rubber/Metal |
| Outer diameter | 50.5 mm |
| Thickness | 61 mm |
| Inner diameter | 14.5 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Material | Plastic |
| Outer diameter | 65 mm |
| Mounting points diameter | 8 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Inner diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 110 mm |
| Material | Rubber/Metal |
| Thickness | 20 mm |
| Type | Stop- /Mounting Buffer |
| Function | Stop- /Mounting Buffer |
| Hole Spacing | 89 mm |
| Width | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Type | with right-hand thread |
| Thread Length | 48.3 mm |
| Rod/Strut | Coupling Rod |
| Spanner Size | 19 |
| Thickness | 80 mm |
| Outer diameter | 9 mm |
| Material | Steel |
| Length | 132 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,75 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 295 mm |
| Additional Information | with fastening/mounting material |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (28358)
- 1x Febi Seal Ring (28357)
- 1x Febi Clamping Clip (38763)
- 1x Febi Cable Tie (07027)
- 1x Febi Nut, exhaust manifold (01554)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Additional Information | with grease |
| Placement on Vehicle | Front Axle Right, transmission sided |
| Length | 120 mm |
| Material | Rubber |
| Inner diameter 1 | 36 mm |
| Inner diameter 2 | 100 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (05239)
- 1x Febi Shaft Seal, drive shaft (05238)
- 1x Febi Nut, kingpin (02160)
- 6x Febi Bolt, drive shaft flange (03004)
- 1x Febi Spring Washer (03336)
- 1x Febi Circlip (03335)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
| Length | 64 mm |
| Width | 30 mm |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Radiator, Right, Lower |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| Connector Shape | rectangular |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 74 mm |
| Thickness | 50.5 mm |
| Inner diameter | 15 mm |
| Function | Mounting, differential |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear, Rear Axle Left, Rear Axle Right |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 310 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 68 mm |
| Outer diameter | 48 mm |
| Thickness | 48 mm |
| Inner diameter | 14.2 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Front, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Function | Tie Rod End |
| Length | 183 mm |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 41315 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Washer Fluid Jet, window cleaning |
| Wash Nozzle Type | Heated |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front, both sides |
| Function | Washer Fluid Jet, window cleaning |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























