Proud to be a UK-based company
Contact us
Important compatibility info
| Height | 35 mm |
| Width | 151 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter, cabin air |
| Length | 260 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 80 mm |
| Material | Rubber |
| Inner diameter 1 | 20 mm |
| Inner diameter 2 | 68 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101949)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45636)
- 1x Febi High Temperature Lubricant (03630)
£14.75
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 1390 mm |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Length | 168 mm |
| Additional Information 2 | with seal ring |
| Bolt Head/Nut Design | External Hexagon |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Placement on Vehicle | Intake Side |
| Type | Finger Follower, engine timing |
| Function | Finger Follower, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Cone Size | 21.8 mm |
| Mounting points diameter | 10.3 mm |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| External Thread Size | M20 x 1,5 |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Function | Radiator Hose |
| Cooling Hose | from thermostat to radiator |
| Placement on Vehicle | Upper |
| Type | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Hose Length | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Length | 1558 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Paired article numbers | 14107 |
| Function | Tie Rod End |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Material | Plastic |
| Outer diameter | 65 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| for OE number | 651 200 02 70 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.75
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Steel |
| Paired article numbers | 34480 |
| Colour | Black |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Internal Thread Size | M17 x 1,5 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| Internal Thread Size | M17 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Material | Steel |
| Paired article numbers | 34481 |
| Colour | Black |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 150 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| Material | Plastic |
| Thickness | 190 mm |
| Width | 160 mm |
| Length | 380 mm |
| Radius | 460 mm |
| Colour | Yellow |
| DIN / ISO | 76051 |
| Function | Wheel Chock |
| Type | Wheel Chock |
| Additional Information 2 | Handle in housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| Length | 1470 mm |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Spanner Size | 17 |
| Length | 123 mm |
| Thickness | 72 mm |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| Width | 77 mm |
| Function | Protective Cap/Bellow, shock absorber |
| Length | 239 mm |
| Placement on Vehicle | Rear Axle |
| Type | Protective Cap/Bellow, shock absorber |
| Additional Information | with bump stop |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 109574 |
| Length | 363 mm |
| Thickness | 76 mm |
| Thread Length | 27.4 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Aluminium |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| Additional Information | with gasket/seal |
| Additional Information 2 | with screw connection |
| Trailer Hitch | with rear fog light deactivation |
| Number of Poles | 13 -pin connector |
| Function | Trailer Socket |
| Type | Trailer Socket |
| Voltage | 12 V |
| Protection Type (IP Code) | 54 |
| DIN / ISO | 11446 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 310 mm |
| Function | Inner Tie Rod |
| External Thread Size | M12 x 1,25, M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter 1 | 42 mm |
| Cone Size | 20 mm |
| Type | Ball Joint |
| Function | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.74
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 330 mm |
| Width | 65 mm |
| Thickness | 35 mm |
| Spanner Size | 19 |
| Paired article numbers | 32075 |
| Rod/Strut | Coupling Rod |
| Quality/ Grade | 10.8 |
| DIN / ISO | 985 |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.73
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 330 mm |
| Width | 65 mm |
| Thickness | 35 mm |
| Spanner Size | 19 |
| Paired article numbers | 32076 |
| Rod/Strut | Coupling Rod |
| Quality/ Grade | 10.8 |
| DIN / ISO | 985 |
| External Thread Size | M12 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.73
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 105.5 mm |
| Width | 56 mm |
| Inspection Tag | ECE R90 Approved |
| Additional Information 2 | with bolts/screws |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16 mm |
| Type | Brake Pad Set, disc brake |
| Replaces | 16476 |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.73
Important compatibility info
| Function | Gasket, oil sump |
| Material | Rubber/Metal |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.73
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 493 mm |
| Housing Diameter | 19 mm |
| Eject Force | 600 N |
| Stroke | 181 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 278.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.73
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 64 mm |
| Inner diameter | 34 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with Split Pin, with axle nut, with retaining rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.73
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 42305 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.73
Important compatibility info
| Placement on Vehicle | Outer |
| Inner diameter | 246 mm |
| Mounting bores distance | 164 mm |
| Mounting points diameter | 11 mm |
| Function | Fixing Strap, compressed-air tank |
| Type | Fixing Strap, compressed-air tank |
| Material | Sheet Steel |
| Colour | black |
| Bolt Head/Nut Design | External Hexagon |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.73
Important compatibility info
| Height | 32 mm |
| Material | Plastic |
| Outer diameter | 123 mm |
| Inner diameter | 74 mm |
| Function | Rolling Bearing, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.73
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 12.8 mm |
| Outer diameter 1 | 89 mm |
| Outer diameter 2 | 115 mm |
| Type | Rolling Bearing, suspension strut support mount |
| Function | Rolling Bearing, suspension strut support mount |
| Inner diameter | 78.8 mm |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.73
Important compatibility info
| Width | 241 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Length | 324 mm |
| Height | 58 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.73
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.72
Important compatibility info
| Material | Plastic |
| Voltage | 12 V |
| Colour | Black |
| Number of Connectors / Ports | 7 |
| Combi Switch Function | with indicator function, with high beam function, with park light function, with headlight flasher |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.72
Important compatibility info
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 126 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 27 mm |
| Inner diameter 2 | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (29821)
- 1x Febi Clamping Clip (45642)
- 2x Febi Molybdenum Grease (02582)
£14.72
Important compatibility info
| Length | 240 mm |
| Height | 20 mm |
| Width | 169 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.72
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Material | Plastic |
| Outer diameter | 65 mm |
| Mounting points diameter | 8 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Inner diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.72
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Type | with right-hand thread |
| Thread Length | 48.3 mm |
| Rod/Strut | Coupling Rod |
| Spanner Size | 19 |
| Thickness | 80 mm |
| Outer diameter | 9 mm |
| Material | Steel |
| Length | 132 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,75 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.72
Important compatibility info
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 295 mm |
| Additional Information | with fastening/mounting material |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (28358)
- 1x Febi Seal Ring (28357)
- 1x Febi Clamping Clip (38763)
- 1x Febi Cable Tie (07027)
- 1x Febi Nut, exhaust manifold (01554)
- 1x Febi Molybdenum Grease (02582)
£14.71
Important compatibility info
| Outer diameter | 74 mm |
| Thickness | 50.5 mm |
| Inner diameter | 15 mm |
| Function | Mounting, differential |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear, Rear Axle Left, Rear Axle Right |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.71
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 310 mm |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.71
Important compatibility info
| Width | 68 mm |
| Outer diameter | 48 mm |
| Thickness | 48 mm |
| Inner diameter | 14.2 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Front, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.71
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M12 x 1,25 |
| Function | Tie Rod End |
| Length | 183 mm |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 41315 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.71
Important compatibility info
| Function | Filter, cabin air |
| Driver Position | for right-hand drive vehicles |
| Width | 242 mm |
| Filter type | Activated Carbon Filter |
| Height | 43 mm |
| Length | 279 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.71
Important compatibility info
| Type | Washer Fluid Jet, window cleaning |
| Wash Nozzle Type | Heated |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front, both sides |
| Function | Washer Fluid Jet, window cleaning |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.71
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Steel |
| Length | 270 mm |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.71
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 204 mm |
| Thickness | 80 mm |
| Spanner Size | 22 |
| Paired article numbers | 41314 |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.71
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023