Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 24 V |
| Control Range | 0,7+0,5 bar |
| Type | Air Dryer, compressed-air system |
| Rated Power | 100 W |
| Function | Air Dryer, compressed-air system |
| Cut-off Pressure | 8,5 bar |
| Additional Information 2 | with integrated oil separator, with dryer |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.38
Important compatibility info
| Pulleys | with belt pulley |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.38
Important compatibility info
| Paired article numbers | 186069 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 735 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.38
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 992 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 60 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.38
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 55 mm |
| Current Strength | 140 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.38
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Paired article numbers | 104398 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.37
Important compatibility info
| Function | Vacuum Pump, braking system |
| Additional Information | with gasket/seal |
| Type | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.34
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 148 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (108078)
- 1x Febi Guide, timing chain (108801)
- 1x Febi Guide, timing chain (107896)
- 1x Febi Gear/Sprocket, camshaft (108802)
- 1x Febi Sprocket, crankshaft (108803)
- 1x Febi Shaft Seal, crankshaft (107164)
£134.34
Important compatibility info
| for OE number | 038 145 771 AA S1 |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.17
Important compatibility info
| Additional Information 2 | with crown nut |
| Outer diameter | 48 mm |
| Length | 860 mm |
| Placement on Vehicle | Front Axle Left |
| Type | Tie Rod |
| Function | Tie Rod |
| Paired article numbers | 178494 |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.16
Important compatibility info
| Operating Mode | Manual |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 3 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.14
Important compatibility info
| Replaces | 19205; 20047 |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 695 mm |
| Min. Length | 425 mm |
| Pipe Diameter | 66 mm. 59 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 853 mm |
| Min. Length | 515 mm |
| Pipe Diameter | 76 mm. 63.5 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Pipe Diameter | 65 mm. 76 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Min. Length | 481 mm |
| Max. Length | 794 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.13
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 51 mm |
| Outer diameter | 88 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Outer diameter 1 | 79 mm |
| Outer diameter 2 | 143 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.04
Important compatibility info
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.01
Important compatibility info
| for OE number | 06E 109 465 AS S3 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 74 |
| Chain Type | Simplex, Closed chain |
| Extra Description | Basic Short Kit |
| Placement on Vehicle | Right, Upper |
| Additional Information | with chain tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (39969)
- 1x Febi Tensioner, timing chain (180155)
£134.01
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Paired article numbers | 182075 |
| Placement on Vehicle | Front Axle Right, Lower |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Triangular Control Arm (CV) |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 19 mm |
| External Thread Size | M14 x 1,5 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.97
Important compatibility info
| Type | Fuel Pump |
| Mounting points diameter | 6.5 mm |
| Function | Fuel Pump |
| Internal Thread Size | M16 x 1,5, M12 x 1,25 |
| Number of mounting bores | 2 |
| Number of Connectors / Ports | 3 |
| Operating Mode | Mechanical |
| Material | Steel |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.91
Important compatibility info
| Number of grooves | 9 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Housing material | Aluminium |
| Water pump impeller material | Plastic |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.89
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Min. Length | 292 mm |
| Max. Length | 426 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.82
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 320 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 21.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented, two-piece brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.79
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Length | 49 mm |
| Spanner Size | 27 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.75
Important compatibility info
| Function | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Paired article numbers | 40129 |
| Additional Information 2 | with bearing |
| Outer diameter | 53 mm |
| Length | 235 mm |
| Placement on Vehicle | both sides |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (40730)
- 1x Febi Lock Ring, steering knuckle (40731)
- 1x Febi Lock Ring, steering knuckle (40736)
- 1x Febi Seal Ring, steering knuckle (40738)
- 1x Febi Seal Ring, steering knuckle (40737)
- 1x Febi O-Ring Repair Set (40739)
- 1x Febi Lock Ring, steering knuckle (40740)
- 4x Febi Screw (40741)
- 2x Febi Repair Kit, kingpin (40742)
- 1x Febi Grease Nipple (01096)
- 1x Febi Grease Nipple (06635)
- 1x Febi Spacer, kingpin (46436)
- 1x Febi Spacer, kingpin (46437)
- 1x Febi Spacer, kingpin (46438)
- 1x Febi Spacer, kingpin (46439)
- 1x Febi Spacer, kingpin (46440)
- 1x Febi Spacer, kingpin (46441)
£133.52
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Housing, fuel filter |
| Additional Information 2 | with pressure sensor |
| Housing material | Aluminium |
| Type | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Housing, fuel filter (179567)
- 1x Febi Sensor, oil pressure (100939)
£133.48
Important compatibility info
| Type | Hub, engine cooling fan wheel |
| Function | Hub, engine cooling fan wheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.45
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 45528 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 25.5 mm |
| Cone Size | 20.7 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| External Thread Size | M14 x 1,5 |
| Additional Information | with rubber mounts, with lock nut |
| Replaces | 45525 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (45525)
- 1x Febi Nut (40161)
£133.39
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| for OE number | 004 151 79 01 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Combi Switch Function | with indicator function, with high beam function, with rear wipe-wash function, with light dimmer function, with wipe-wash function |
| Type | Operating Unit, steering column |
| Function | Operating Unit, steering column |
| Extra Description | febi Plus |
| for OE number | 735622186 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£133.39
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 134 |
| Chain Type | Simplex, Closed chain |
| Type | Timing Chain Kit |
| for OE number | 13506-37040 S1 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49728)
- 1x Febi Tensioner, timing chain (109308)
- 1x Febi Guide, timing chain (174609)
- 1x Febi Guide, timing chain (109450)
£133.39
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023