Proud to be a UK-based company
Contact us
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| External Thread Size | M14 x 1,5 |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 753 mm |
| Min. Length | 443 mm |
| Pipe Diameter | 63 mm. 55 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Piston conrod diameter | 14 mm |
| Mounting points diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.75
Important compatibility info
| Thread Size | M27x1,5 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 86 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 100 mm |
| External Teeth, Wheel Side | 30 |
| Number of mounting bores | 6 |
| Min. Length | 617 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Additional Information 2 | with nut |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.62
Important compatibility info
| Function | Throttle body |
| Number of Connectors / Ports | 4 |
| Operating Mode | Electric |
| Voltage | 12 V |
| Height | 79 mm |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.53
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Additional Information 2 | with rolling bearing |
| Additional Information | with fastening/mounting material |
| Length | 220 mm |
| Inner diameter | 41 mm |
| Placement on Vehicle | Front |
| Hole Spacing | 193 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.53
Important compatibility info
| Operating Mode | Mechanical |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Length | 894 mm |
| Number of Ribs | 6 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information | with clamping elements |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38432)
- 1x Febi Belt Tensioner, v-ribbed belt (33136)
- 1x Febi Belt Tensioner, v-ribbed belt (104908)
£134.53
Important compatibility info
| Number of Connectors / Ports | 4. 2 |
| Function | Sender Unit, fuel tank |
| Screw length below head | 683 mm |
| for OE number | 81.27203.6021 |
| Type | Sender Unit, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.51
Important compatibility info
| Operating Mode | Hydraulic |
| Function | Hydraulic Pump, steering |
| Mounting points diameter | 9 mm |
| Number of Teeth | 18 |
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Material | Aluminium |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.46
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 134 |
| Chain Type | Simplex, Closed chain |
| Type | Timing Chain Kit |
| for OE number | 13506-37040 S1 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49728)
- 1x Febi Tensioner, timing chain (109308)
- 1x Febi Guide, timing chain (174609)
- 1x Febi Guide, timing chain (109450)
£134.39
Important compatibility info
| Type | Interior Blower |
| Number of Connectors / Ports | 4 |
| Voltage | 12 V |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.39
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.7 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.39
Important compatibility info
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Function | Control, swirl flaps (induction pipe) |
| Extra Description | febi Plus |
| Type | Control, swirl flaps (induction pipe) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.38
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter 1 | 170 mm |
| Width 1 | 47 mm |
| Outer diameter 2 | 157 mm |
| Width 2 | 42 mm |
| Inner diameter 1 | 110 mm |
| Inner diameter 2 | 100 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| for OE number | 942 350 39 35 S1 |
| Bearing Type | Rolling Bearing |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (23314)
- 1x Febi Wheel Bearing (45806)
- 1x Febi Shaft Seal, wheel hub (24758)
- 1x Febi Circlip (24757)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Ring, wheel hub (22842)
- 1x Febi Sensor Ring, ABS (18612)
£134.38
Important compatibility info
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 164 |
| Extra Description | Basic Short Kit |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (100620)
- 1x Febi Tensioner, timing chain (108144)
- 1x Febi Guide, timing chain (108145)
- 1x Febi Guide, timing chain (108146)
- 1x Febi Guide, timing chain (104344)
£134.38
Important compatibility info
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.37
Important compatibility info
| Paired article numbers | 186069 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 735 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.37
Important compatibility info
| Material | FVMQ [fluorosilicone rubber) |
| Additional Information 2 | with quick couplers |
| Inner diameter | 46 mm |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.37
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 7 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 55 mm |
| Current Strength | 140 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.37
Important compatibility info
| Manufacturer | Aspöck |
| Placement on Vehicle | Left |
| Height | 150 mm |
| Width | 400 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193029 |
| Port / Connector type | ASS4 7 pin |
| Number of Connectors / Ports | 6 |
| Light Function | with indicator, with stop light, with reverse light, with rear fog light, with reflector (triangular), with side marker light, with taillight (LED), without licence plate light |
| Depth | 120 mm |
| Protection Type (IP Code) | IP56K |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R10, R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.37
Important compatibility info
| Manufacturer | Aspöck |
| Placement on Vehicle | Right |
| Height | 150 mm |
| Width | 400 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193027 |
| Port / Connector type | ASS4 7 Pin |
| Number of Connectors / Ports | 6 |
| Light Function | with indicator, with stop light, with reverse light, with rear fog light, with reflector (triangular), with side marker light, with taillight (LED), without licence plate light |
| Depth | 120 mm |
| Protection Type (IP Code) | IP56K |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R10, R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.37
Important compatibility info
| Width | 22 mm |
| Outer diameter | 126 mm |
| Inner diameter | 17 mm |
| Parameter | 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£134.37
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023