Important compatibility info
Weight | 0.417 kg |
Material | Cast Iron |
Placement on Vehicle | Rear Axle Left |
Function | Wheel Brake Cylinder |
Piston Diameter | 19.1 mm |
Paired article numbers | 102821 |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.61 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 214 mm |
Material | Sheet Steel |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.527 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 48 mm |
Thickness | 123 mm |
Inner diameter | 10 mm |
Function | Mounting, control/trailing arm |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 91 mm |
Weight | 0.251 kg |
Placement on Vehicle | Upper |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Holder, engine mounting system |
Replaces | 22768; 32167; 38525 |
Type | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 27 |
Number of Connectors / Ports | 2 |
Combi Switch Function | Normally Closed Contact |
Shifting Points | 5.5 bar |
Function | Pressure Switch |
Internal Thread Size | M12 x 1,5 |
External Thread Size | M24 x 1 |
Weight | 0.102 kg |
Type | Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Spanner Size | 24 |
Number of Connectors / Ports | 3 |
Function | Oil Pressure Switch |
Switch point to | 0.55 bar |
Switch point from | 0.3 bar |
Colour | White |
Length | 50 mm |
Type | Oil Pressure Switch |
External Thread Size | M14 x 1,5 |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Weight | 0.725 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 330 mm |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 78 mm |
Outer diameter | 41 mm |
Thickness | 54 mm |
Inner diameter | 16.5 mm |
Function | Bushing, leaf spring |
Weight | 0.213 kg |
Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Weight | 0.071 kg |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Placement on Vehicle | Rear Axle |
Length | 85 mm |
Width | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket Set, hydraulic pump |
Extra Description | febi Plus |
Type | Gasket Set, hydraulic pump |
Weight | 0.009 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane), Plastic |
Placement on Vehicle | Rear Axle |
Function | Dust Cover Kit, shock absorber |
Weight | 0.192 kg |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (17286)
- 2x Febi Protective Cap/Bellow, shock absorber (26941)
Important compatibility info
Type | Air Filter |
Weight | 0.22 kg |
Filter type | Filter Insert |
Additional Information 2 | with pre-filter |
Width | 234 mm |
Height | 79 mm |
Length | 272 mm |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Weight | 0.086 kg |
Number of Ribs | 6 |
Length | 1005 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.098 kg |
Outer diameter | 86 mm |
Thickness | 12 mm |
Inner diameter | 62 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Rolling Bearing, suspension strut support mount |
Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.322 kg |
Placement on Vehicle | both sides |
Length | 540 mm |
Housing Diameter | 19 mm |
Eject Force | 400 N |
Stroke | 210 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 299.5 mm |
Replaces | 24325 |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.825 kg |
Height | 182 mm |
Outer diameter | 108 mm |
Inner diameter | 91 mm |
Filter type | Spin-on Filter |
Function | Oil Filter |
Internal Thread Size | M30 x 2 |
Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left |
Length | 80 mm |
Material | Steel |
Paired article numbers | 33650 |
Pipe Diameter | 9 mm |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.23 kg |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Diameter | 1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1795 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Weight | 0.183 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 9 mm |
Material | Steel |
Weight | 0.23 kg |
Placement on Vehicle | Front Axle Right |
Length | 80 mm |
Paired article numbers | 33649 |
Rod/Strut | Coupling Rod |
External Thread Size | M10 x 1,25 |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.57 kg |
Length | 107 mm |
Bolt Head/Nut Design | Male Torx |
Quality/ Grade | 12.9 |
Function | Cylinder Head Bolt Set |
Screw length below head | 95 mm |
External Thread Size | M10 x 1,5 |
Type | Cylinder Head Bolt Set |
Number of screws | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 10x Febi Cylinder Head Bolt (04083)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023